StarTech.com 4PCIE-PCIE-ENCLOSURE Manual

StarTech.com Ikke kategoriseret 4PCIE-PCIE-ENCLOSURE

Læs gratis den danske manual til StarTech.com 4PCIE-PCIE-ENCLOSURE (3 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 26 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 13.5 anmeldelser. Har du et spørgsmål om StarTech.com 4PCIE-PCIE-ENCLOSURE, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: November 22, 2022

Product Diagram (4PCIE-PCIE-ENCLOSURE)

PCIe Expansion Chassis

PCIe 2.0 to 4 PCIe Slots Expansion Chassis - USB Type-C

Port/LED/

Connector Function

1PCIe Expansion

Slots

• Install up to Four PCIe cards

• PCIe version 2.0 p1-x1 slots

• 10 Gbps aggregate host bandwidth

• Full length cards supported

2Mounting

Brackets

• (Optional) Allows for a permanent installation of the PCIe

Expansion Chassis to a at and stable surface

• at the and of the Mounting Holes Front Back PCIe

Expansion Chassis Mounting Brackets secure the

3On/O Switch

• Turns the or Expansion Chassis On O

• The correct sequence to power the device:

• Power on: Power the On PCIe Expansion Chassis

rst, then the Host Computer

• Power o: Power the rst, then O Host Computer

the PCIe Expansion Chassis

4DC Power Port

• Connect the to a PCIe Expansion Chassis Power Source

using the included Power Adapter

• Recommended 12 V and 3 A. Supports 12 to 24 V input

5USB Type-C

Connector

• Used to connect the to a PCIe Expansion Chassis Host

Computer

• If the is disconnected during use, USB Type-C Cable

the must be restarted to reestablish the Host Computer

connection

• For a secure and correct cable connection, threaded

holes around the r allow to USB Type-C Connecto

Screw-lock USB Type-C Cable the included

6USB Type-C LED

Indicator

• Indicates if the included is on the USB Type-C-Cable

correct orientation. The cable is not reversible

• Solid Green = Correct orientation

7Power LED

Indicator

• Indicates if the is turned or On/O Switch On O

• Solid Red = On

• O = O

8Terminal Block

Connector

• Connect the to a PCIe Expansion Chassis DC Power

Source

• Recommended 12 V and 3 A. Supports 12 to 24 V input

9Metal Cover • Remove the to install the Metal Cover PCIe cards

*Product may vary from image

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: November 22, 2022

PCIe Host Adapter Card

Port/LED/

Connector Function

1Bracket • Secures the card to the . The Host Computer Case Full-

height Bracket comes pre-installed

JP1 Jumper

(BUS PWR)

JP2 Jumper

(WAKE) (not

visible in image)

• Enables the to provide power to PCIe Host Adapter Card

the via the . PCIe Expansion Chassis USB Type-C Cable

• Three position are available for : 12V, NC JP1

(default), and 5V

• To inject power via the it PCIe Host Adapter Card

must be used in combination with and on JP1 JP2

the PCIe Expansion Chassis

• Enables the , and allows to wake thePCIe WAKE# Pin

Host Computer Wake-on-LAN (WoL) Packetswhen

have been received. A capable must WoL Network Card

be installed in the . PCIe Expansion Chassis

• Two positions are available for : DIS (disabled) JP2

and ENA (default)

3LP4 Power

Connector • Connect theOptional: Host Computer Power Supply

4SATA Power

Connector • Connect theOptional: Host Computer Power Supply

5PCIe x2

Connector • Insert into a on the host Host ComputerPCIe Slot

6USB Type-C

Connector

• Used to connect the to the PCIe Host Adapter Card PCIe

Expansion Chassis

• For a secure and correct cable connection, threaded

holes around the r allow to USB Type-C Connecto Screw-

lock USB Type-C Cable the included

Package Contents

• PCIe to PCIe Expansion Chassis x 1

• PCIe Host Adapter Card

• 6ft (1.8m) USB Type-C to C Male to Male Cable x 1

• Low-Prole Bracket x 1

• Power Adapter x 1

• Terminal Block Connector x 1

• Mounting Brackets x 2

• Mounting Brackets Screws x 4

• Quick-Start Guide x 1

Requirements

For the latest requirements, please visit www.startech.com/4PCIE-PCIE-ENCLOSURE

• Host Computer with an available PCIe Slot (x2, x4, x8, or x16)

• Phillips head screwdriver

Installation

WARNING!

Static electricity can severely damage the PCIe card(s) ensure that you are adequately

grounded before you open your Host Computer case or touch the PCIe card(s). You

should wear an anti-static strap or use an anti-static mat when installing any Host

Computer component. If an anti-static strap isn’t available, discharge any built-up

static electricity by touching a large grounded metal surface for several seconds. Only

handle the PCIe card(s) by the edges and don’t touch the golden connectors.

Install the PCIe Host Adapter Card

1. Turn the and any that are connected O Host Host Computer Peripheral Devices

to it (e.g. printers, external hard drives, etc.).

2. Unplug the from the back of the .Power Cable Host Computer

3. Disconnect any that are connected to the .Peripheral Devices Host Computer

4. Remove the from the . Consult the documentation that Cover Host Computer Case

came with the for details about doing this safely.Host Computer

5. Locate an available and remove the corresponding from PCIe Slot Slot Cover Plate

the back of the . Consult the documentation that came with Host Computer Case

the for details about doing this safely. The Host Computer PCIe Host Adapter Card

works in , , , or . PCIe x2 x4 x8 x16 Slots

6. Gently insert the into the and fasten the PCIe Host Adapter Card PCIe Express Slot

Bracket Host Computer Case to the back of the .

Note: If you install the PCIe Host Adapter Card into a small form factor or a low-prole

desktop system, it may be necessary to replace the pre-installed standard full-height

bracket with the included low-prole bracket.

8. (Optional) Connect a or from the SATA Power Cable LP4 Host Host Computer

Power Supply.

9. Return the onto the .Cover Host Computer Case

Produkt Specifikationer

Mærke:	StarTech.com
Kategori:	Ikke kategoriseret
Model:	4PCIE-PCIE-ENCLOSURE
Brugervejledning:	Ja
Produktfarve:	Sort
Pakkevægt:	6000 g
Pakkedybde:	200 mm
Pakkebredde:	420 mm
Pakkehøjde:	240 mm
Opbevaringstemperatur (T-T):	-20 - 75 °C
Relativ luftfugtighed ved drift (H-H):	5 - 95 %
Strømforbrug (typisk):	36 W
Driftstemperatur (T-T):	0 - 60 °C
Kabler inkluderet:	USB Type-C til USB Type-C
Materiale:	Stål
DC-in-stik:	Ja
Udgangsspænding:	12 V
Udgangsstrøm:	3 A
Formål:	PC
Hovedkassen højde (udvendigt):	270 mm
Hovedkassens længde (udvendigt):	430 mm
Hovedkassens bredde (udvendigt):	520 mm
Værtsgrænseflade:	USB Type-C
Intern:	Ingen
Ekstern strømadapter:	Ja
Produkter pr. hovedkasse (udvendigt):	2 stk
Monteringsbeslag inkluderet:	Ja
Strømforsyning indgangsspænding:	100 - 240 V
Strømforsyning inkluderet:	Ja
Output-grænseflade:	PCIe, Terminal
Antal PCI Express-slots:	4
Udvidelseskort standard:	PCIe 2.0
Dataoverførselshastighed (maks.):	10 Gbit/sek.
Chipsæt:	ASMedia - ASM1806
Hostinterface han/kun:	Hunstik