StarTech.com BRACKET125PT Manual

StarTech.com Ikke kategoriseret BRACKET125PT

Læs gratis den danske manual til StarTech.com BRACKET125PT (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 8 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 4.5 anmeldelser. Har du et spørgsmål om StarTech.com BRACKET125PT, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

*actual product may vary from photos

Instruction manual

FR: Guide de l’utilisateur - fr.startech.com

DE: Bedienungsanleitung - de.startech.com

ES: Guía del usuario - es.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

IT: Guida per l’uso - it.startech.com

Manual Revision: 07/10/2016

For the latest information, technical specications, and support for

this product, please visit www.StarTech.com/BRACKET125PT.

BRACKET125PT

2.5” SSD/HDD Mounting Bracket for 3.5” Drive Bay - Tool-less Installation

Read and understand the entire manual before Important:

you use this product, and follow the instructions as they are

outlined in the manual.

Failure to do so might result in property damage or device

failure.

Introduction

You can use the BRACKET125PT to install a 2.5 in. SSD (solid-state

drive) or HDD (hard disk drive) into a 3.5 in. drive bay. The tool-less

design of the BRACKET125PT makes it easy to install drives.

Product diagram

Package contents

• 1 x 2.5 in. SSD/HDD to 3.5 in. mounting bracket

• 6 x plastic pegs

• 1 x instruction manual

System requirements

• Computer with an available 3.5 in. drive bay

• One 2.5 in. SSD or HDD

The operating system of your computer will detect the drive and

automatically install it.

System requirements are subject to change. For the latest

requirements, please visit www.StarTech.com/BRACKET125PT.

Plastic post

Plastic peg

Install the drive and bracket

Warning! Hard drives and storage enclosures should be handled

carefully, especially when they’re transported. If you’re not careful

with your drives, you may experience lost data as a result. Always

handle storage devices with caution. Make sure that you’re properly

grounded by wearing an anti-static strap when you install any

computer component. If an anti-static strap isn’t available, touch a

large grounded metal surface for several seconds to discharge any

built-up static electricity.

1. Remove the six from the that are Plastic pegs Plastic posts

attached to the mounting bracket.

2. Pull the o of the mounting bracket and discard the Plastic posts

posts.

3. Align your SSD or HDD with the Tenons (plastic projections) on

the mounting bracket, and gently push the drive into place.

4. Turn o your computer and any devices or peripherals that are

connected to it (for example, printers, external hard drives, and

so on).

5. Unplug the power cable from the back of your computer.

6. Disconnect any peripheral devices that are connected to your

computer.

7. Remove the cover from your computer case. Consult the

documentation that came with your computer for details about

how to do this safely.

8. Place the bracket into the 3.5 in. hard drive slot, and use the

Plastic pegs that you removed in step 1 to secure the drive in

place.

9. Connect a power connection from the computer’s power supply

to the drive’s power connector.

(continued on next page)

Tenon

(plastic projections)

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to

StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s)

to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all

trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.

Technical Support

StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and

access our comprehensive selection of online tools, documentation, and downloads.

For the latest drivers/software, please visit www.startech.com/downloads

Warranty Information

This product is backed by a two-year warranty.

StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned for

repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages arising from

misuse, abuse, alteration, or normal wear and tear.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental,

consequential, or otherwise), loss of prots, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not

allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.

10. Use the appropriate cable and connect the drive to the host

controller.

11. Place the cover back onto your computer case.

12. Reconnect the power cable to the back of your computer and

reconnect all of the peripheral devices that you previously

disconnected.

13. Turn on your computer and any peripherals that are connected

to it.

Produkt Specifikationer

Mærke:	StarTech.com
Kategori:	Ikke kategoriseret
Model:	BRACKET125PT
Type:	Bærerpanel
Bredde:	102 mm
Dybde:	150 mm
Højde:	13 mm
Vægt:	33 g
Produktfarve:	Sort
Pakkevægt:	60 g
Pakkedybde:	156 mm
Pakkebredde:	111 mm
Pakkehøjde:	21 mm
Hurtig start guide:	Ja
Materiale:	Plast
Harmoniseret systemkode (HS):	84733080
Bæredygtighedscertifikater:	CE, RoHS
Hovedkassen højde (udvendigt):	254 mm
Hovedkassens længde (udvendigt):	538 mm
Hovedkassens bredde (udvendigt):	332 mm
Produkter pr. hovedkasse (udvendigt):	100 stk
Overholdelse af bæredygtighed:	Ja
Antal stifter:	6
HDD-grænseflade:	IDE/ATA, Serial ATA, Serial ATA II, Serial ATA III, Serial Attached SCSI (SAS)
Størrelse:	3.5 "
HDD-størrelse:	2.5 "
Antal understøttede HHD'er:	1
Understøttede lagerdisk højder:	7, 9.5 mm