StarTech.com DSKCRNRSLV Manual

StarTech.com Ikke kategoriseret DSKCRNRSLV

Læs gratis den danske manual til StarTech.com DSKCRNRSLV (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 33 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 17 anmeldelser. Har du et spørgsmål om StarTech.com DSKCRNRSLV, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support

Manual Revision: August 24, 2023

Product ID

DSKCRNRSLV

Top View

Back View

Installation Top View

Desk Corner Sleeve - Black

Component Function

1 Usable Surface • Use to place a keyboard and mouse on top

2 Wood Screw Holes x 2

• Located on the Clamping Plates

• (Optional) Used to x the Desk Corner Sleeve to a

wooden desk

Note: The provided screws are for 0.8in (20mm) or

thicker wooden desks only

3 Clamping Plates x 2

• Secure the Desk Corner Sleeve to a desk

• Adjustable to support thicknesses of 0.5 to 1.5 in (12.7

to 38.1 mm)

Clamping Plate

Guides

• Allow to move the Clamping Plates up and down

evenly

Clamping Plate

Screws x 2

• Use the included Hex Key to tighten or loosen the

screws located on the Bottom Clamp

6 Felt Strips

• Located around the bottom of the Usable Surface

• Help protect the desk or table surface

Package Contents

• Corner Sleeve x1

• Hex Key x 1

• 4.2x16mm Wood Screws x 2

• Quick-Start Guide x 1

Requirements

For the latest manuals, product information, technical specications, and declarations

of conformance, please visit: www.startech.com/DSKCRNRSLV

• L shaped desk or table with a 90° angle

• Phillips head screwdriver (Only If doing the Screw-in Installation)

• Wooden desk or table. (Only if doing the Screw-in Installation)

Installation

Screw-in Installation

Warnings!

*Product may vary from image

Regulatory Compliance

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols

of third-party companies not related in any way to StarTech.com. Where they occur these references are for illustrative

purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the

product(s) to which this manual applies by the third-party company in question. StarTech.com hereby acknowledges that

all trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual

and related documents are the property of their respective holders.

PHILLIPS® is a registered trademark of Phillips Screw Company in the United States or other countries.

Warranty Information

This product is backed by a ve-year warranty.

For further information on product warranty terms and conditions, please refer to www.startech.com/warranty.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or

agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of

prots, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price

paid for the product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such

laws apply, the limitations or exclusions contained in this statement may not apply to you.

Safety Measures

Assemble this product according to the instructions. Read the entire manual and ensure the instructions are fully

understood before assembling and/or using this product.

Mesures de Sécurité

Assemblez ce produit conformément aux instructions. Lisez l’intégralité du manuel et assurez-vous que les instructions

sont bien comprises avant d’assembler et/ou d’utiliser ce produit.

Veiligheidsmaatregelen

Monteer dit product volgens de instructies. Lees de gehele handleiding en zorg ervoor dat u de instructies volledig

begrijpt voordat u dit product monteert en/of gebruikt.

Säkerhetsåtgärder

Montera produkten enligt instruktionerna. Läs hela manualen och se till att du har förstått instruktionerna innan du

monterar och/eller använder produkten.

Sicherheitsmaßnahmen

Bauen Sie dieses Produkt gemäß der Anleitung zusammen. Lesen Sie das gesamte Handbuch und stellen Sie sicher, dass Sie

die Anweisungen vollständig verstanden haben, bevor Sie dieses Produkt zusammenbauen und/oder verwenden.

安全対策

最初に取扱説明書を最後まで読み、本製品の組み立て方をすべて理解してから組み立て作業を始めて下さい。

Misure di Sicurezza

Leggere l’intero manuale e assicurarsi di aver compreso tutte le istruzioni prima di iniziare ad assemblare e a utilizzare

questo prodotto.

Medidas de Seguridad

Monte este producto siguiendo las instrucciones. Lea todo el manual y asegúrese de que las instrucciones se entienden

completamente antes de montar y/o utilizar este producto.

FR: startech.com/fr

DE: startech.com/de

ES: startech.com/es

NL: startech.com/nl

IT: startech.com/it

JP: startech.com/jp

StarTech.com Ltd.

45 Artisans Crescent

London, Ontario

N5V 5E9

Canada

StarTech.com Ltd.

Unit B, Pinnacle 15

Gowerton Road

Brackmills,

Northampton

NN4 7BW

United Kingdom

StarTech.com LLP

4490 South Hamilton

Road

Groveport, Ohio

43125

U.S.A.

StarTech.com Ltd.

Siriusdreef 17-27

2132 WT Hoofddorp

The Netherlands

• The provided screws are for 0.8in (20mm) or thicker wooden desks only. If using a

thinner desk, the screws may damage the desk’s top surface.

• Do not over-tighten the mounting screws.

1. Using the Hex Key, adjust the Left and Right Clamping Plates to the approximate

thickness of the Desk using the Clamping Plate Screws on the Bottom Clamp.

2. Place the Desk Corner Sleeve centered at the desired corner mounting location.

3. Adjust the Clamping Plate Screws until the Clamping Plates make light contact

with the Desk Underside.

4. Install the Wood Screws through the Mounting Holes on the Clamping Plates.

Using a Philips Head Screwdriver Tighten the Wood Screws to fasten the Desk

Corner Sleeve to the Desk.

Normal Installation

1. Using the Hex Key, adjust the Left and Right Clamping Plates to the approximate

thickness of the Desk using the Clamping Plate Screws on the Bottom Clamp.

2. Place the Desk Corner Sleeve centered at the desired corner mounting location.

3. Use the Hex Key to Tighten the Clamping Plate Screws until the Clamping Plates

are fastened onto the Desk Underside.

Quick-Start Guide

www.quefairedemesdechets.fr

ASSOCIATION

MAGASIN DÉCHÈTERIE

OU OU

Pensez à

donner ou

recycler

Produkt Specifikationer

Mærke:	StarTech.com
Kategori:	Ikke kategoriseret
Model:	DSKCRNRSLV
Bredde:	332 mm
Højde:	52 mm
Vægt:	5000 g
Produktfarve:	Sort
Pakkevægt:	5000 g
Pakkedybde:	688 mm
Pakkebredde:	370 mm
Pakkehøjde:	85 mm
Materiale:	Stål
Bæredygtighedscertifikater:	CE, RoHS
Hovedkassen højde (udvendigt):	360 mm
Hovedkassens længde (udvendigt):	705 mm
Hovedkassens bredde (udvendigt):	385 mm
Længde:	635 mm
Højdejustering:	Ingen
Produkter pr. hovedkasse (udvendigt):	4 stk
Overholdelse af bæredygtighed:	Ja