StarTech.com FD121-KVM-EXTENDER Manual

StarTech.com Ikke kategoriseret FD121-KVM-EXTENDER

Læs gratis den danske manual til StarTech.com FD121-KVM-EXTENDER (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 13 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 7 anmeldelser. Har du et spørgsmål om StarTech.com FD121-KVM-EXTENDER, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: April 23, 2024

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Product Diagram

FD121-KVM-EXTENDER

Transmitter

Receiver

DisplayPort KVM Console Extender Over Fiber - 4K 60Hz

Component Function

1 Power / Connection LEDs • See LED Indicator Table

2 Power Supply Port • Connect the included Universal Power Adapter

3 Fiber Connection Port

• Use an LC-Terminated Fiber Cable to connect the

Transmitter and Receiver

4 Video Input Port • Connect a DisplayPort Video Source

5 USB Host Connector

• Connect to an available USB Port on the Host

Computer or HID Port on a KVM Switch

6 USB Status LEDs

• Orange when USB Devices are connected

• (Flashes 1~4 times to indicate connected USB

Device number)

7 Video Output Port • Connect a DisplayPort Display Device

8 USB-A HID Ports

• Connect USB Devices (e.g. Keyboard, Mouse,

Trackpad, Number Keypad, or Drawing Tablet)

Requirements

For the latest manuals, product information, technical specications, and declarations of

conformance, please visit: www.StarTech.com/FD121-KVM-EXTENDER

• Computer

• USB Enabled

• DisplayPort Output

• USB Keyboard and Mouse

• DisplayPort Display Device

• Duplex LC Fiber Cable (OM3)

• Multimode extends up to 300M

Package Contents

• Transmitter (Local Unit) x 1

• Receiver (Remote Unit) x 1

• 10G Multimode SFP+ Modules (Pre-Installed) x 2

• Universal Power Adapter (NA/EU/UK/ANZ) x 2

• USB-A to Mini USB-B Cables x 3

• Quick-Start Guide x 1

* Product may vary from image

Regulatory Compliance

FCC - Part 15

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will

not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com could

void the user’s authority to operate the equipment.

Industry Canada Statement

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [A] est conforme à la norme NMB-003 du Canada.

CAN ICES-3 (A)/NMB-3(A)

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two

conditions:

(1) This device may not cause interference, and (2) This device must accept any interference, including interference that may

cause undesired operation of the device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation

est autorisée aux deux conditions suivantes:

(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique

subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.

Warranty Information

This product is backed by a two-year warranty.

For further information on product warranty terms and conditions, please refer to www.startech.com/warranty.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents)

for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots, loss

of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the

product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the

limitations or exclusions contained in this statement may not apply to you.

FR: startech.com/fr

DE: startech.com/de

ES: startech.com/es

NL: startech.com/nl

IT: startech.com/it

JP: startech.com/jp

StarTech.com Ltd.

45 Artisans Crescent

London, Ontario

N5V 5E9

Canada

StarTech.com Ltd.

Unit B, Pinnacle 15

Gowerton Road

Brackmills,

Northampton

NN4 7BW

United Kingdom

StarTech.com LLP

4490 South Hamilton

Road

Groveport, Ohio

43125

U.S.A.

StarTech.com Ltd.

Siriusdreef 17-27

2132 WT Hoofddorp

The Netherlands

Operation

LED Indicators

Installation

1. Power o all Devices (e.g. DisplayPort Video Source, Computer, etc.) that will be

connected to the Transmitter and Receiver.

2. Connect the Host Device and all of the USB Peripherals to the Transmitter and

Receiver.

3. Connect a DisplayPort Monitor to the Video Output Port on the Receiver, using a

DisplayPort Cable (not included).

4. Connect a Computer or KVM Switch to the Video Input Port on the Transmitter,

using a DisplayPort Cable (not included).

5. Connect the Transmitter to the Receiver, using a Duplex Multi-Mode LC Fiber Cable

(OM3).

Note: The cabling cannot go through any networking equipment (e.g., router, switch,

etc.). Ensure the transmit and receive ber leads are reversed between the Local and

Remote Unit.

6. Connect the Transmitter and Receiver to Power Sources, using the included

Universal Power Adapters.

7. Power on all the Devices (e.g. DisplayPort Video Source, Computer, etc.) connected

to the Transmitter and Receiver.

Produkt Specifikationer

Mærke:	StarTech.com
Kategori:	Ikke kategoriseret
Model:	FD121-KVM-EXTENDER

Har du brug for hjælp?

Hvis du har brug for hjælp til StarTech.com FD121-KVM-EXTENDER stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret StarTech.com Manualer

StarTech.com RMCRAILS Manual

4 Oktober 2025

StarTech.com F35023-USB-EXTENDER Manual

4 Oktober 2025

StarTech.com TBLT3MM2M Manual

3 Oktober 2025

StarTech.com CMVER40UD Manual

3 Oktober 2025

StarTech.com RKUNITAPE Manual

3 Oktober 2025

StarTech.com RK2537BKM Manual

28 September 2025

StarTech.com ET90110SC2 Manual

9 September 2025

StarTech.com PEX1S553LP Manual

9 September 2025

StarTech.com ET90110ST2 Manual

9 September 2025

StarTech.com CALW-DESK-CABLE-TRAY Manual

22 August 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

ResMed Narval CC Manual

19 Oktober 2025

Dormakaba CenTran 4 Manual

19 Oktober 2025

ResMed AirFit N10 Manual

19 Oktober 2025

CRUX SWRCR-59LV Manual

19 Oktober 2025

Dormakaba Crane S1 Manual

19 Oktober 2025

Shape BP8000 Manual

19 Oktober 2025

Shape ALPKIT Manual

19 Oktober 2025

Shape COMPOFIC Manual

19 Oktober 2025

ResMed AirFit F10 Manual

18 Oktober 2025

Dormakaba Auditcon T52 Manual

18 Oktober 2025