StarTech.com HSB110SATBK Manual

StarTech.com Ikke kategoriseret HSB110SATBK

Læs gratis den danske manual til StarTech.com HSB110SATBK (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 13 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 7 anmeldelser. Har du et spørgsmål om StarTech.com HSB110SATBK, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Instruction Manual

DE: Bedienungsanleitung - de.startech.com

FR: Guide de l'utilisateur - fr.startech.com

ES: Guía del usuario - es.startech.com

IT: Guida per l'uso - it.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

Manual Revision: 10/23/2015

For the most up-to-date information, please visit: www.startech.com

Packaging Contents

• 1 x Trayless Mobile Rack

• 1 x SATA Data Cable

• 1 x Set of Keys

• 1 x Package of Mounting Screws

• 1 x Installation Guide

System Requirements

• Computer chassis/case with available 5.25in external bay

• SATA enabled computer system with available SATA data/power

connections

HSB110SATBK

5.25in Trayless Hot Swap Mobile Rack for 3.5in SATA Hard Drives w/LCD and Fan

Installation

WARNING! Hard drives and storage enclosures require careful

handling, especially when being transported. If you are not careful

with your hard disk, lost data may result. Always handle your hard

drive and storage device with caution. Be sure that you are properly

grounded by wearing an anti-static strap when handling computer

components or discharge yourself of any static electricity build-up

by touching a large grounded metal surface (such as the computer

case) for several seconds.

1. Turn your computer o and any peripherals connected to the

computer (i.e. printers, external hard drives, etc.). Unplug the

power cable from the rear of the power supply on the back of the

computer and disconnect all peripheral devices.

2. Remove the cover from the computer case. Refer to

documentation for your computer system for details.

3. Remove the front cover plate for the 5.25in bay that will contain

the Mobile Rack. Refer to documentation for your computer

system for details.

4. Refer to documentation for your computer system for instructions

on how to mount 5.25in devices into the computer case.

Mounting screws are provided, if necessary.

5. Once mounted in the case, connect the 7-pin SATA data cable from

the motherboard or SATA controller card to the rear of the Mobile

Rack.

6. Connect the 15-pin SATA power cable from the computer power

supply to the rear of the Mobile Rack.

NOTE: An optional 4-pin LP4 Molex power connector is also

available if the computer power supply does not have any available

SATA power connectors.

7. Place the cover back onto the computer case.

8. Insert the power cable into the socket on the power supply and

reconnect all other connectors removed in Step 1.

Front View

Rear View

How to Use

Installing A Hard Drive

1. Open the front bay of the Mobile Rack by pulling on the door

release latch. Swing the door fully open.

2. Gently slide the 3.5in SATA hard drive into the bay, connector rst,

with the label facing up.

3. Slide the hard drive at least 3/4 of the way into the bay, then close

the door to fully insert the hard drive. Make sure the door closes

fully, and the latch properly engages.

4. Use the provided key to lock the door on the Mobile Rack.

NOTE: The Mobile Rack will not power up the hard drive unless the

door is locked.

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to

StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s)

to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all

trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.

Technical Support

StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access

our comprehensive selection of online tools, documentation, and downloads.

Warranty Information

This product is backed by a two-year warranty.

In addition, StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned

for repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages arising from

misuse, abuse, alteration, or normal wear and tear.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental,

consequential, or otherwise), loss of prots, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not allow

the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.

Specications

Host Interface SATA

Connectors

1 x 7-pin SATA Data male

1 x 15-pin SATA Power male

1 x 4-pin LP4 Molex male

LEDs 1 x Power

1 x Activity

Fans 1 x 40mm

Hard Drive

Compatibility 3.5in SATA 1.0/2.0/3.0 hard drives

Key Lock Yes

Insertion Rating 15,000 cycles

Vibration/Shock

Absorbers Yes

Enclosure Material Metal, Plastic (UL94 V-0)

Operating Temperature 5°C ~ 80°C (41°F ~ 176°F)

Storage Temperature -40°C ~ 70°C (-40°F ~ 158°F)

Humidity 8% ~ 90% RH

Dimensions

(LxWxH) 185.0mm x 149.0mm x 42.0mm

Weight 670g

LCD Operation

Button Description

Mode Change the temperature alarm threshold

Set

Toggle temperature readout between Celsius/

Fahrenheit

(Mode) Turn alarm on/o

Toggle temperature readout between Celsius/

Fahrenheit

(Mode) Increase temperature alarm threshold

Down

Toggle temperature readout between Celsius/

Fahrenheit

(Mode) Decrease temperature alarm threshold

Note: Powering the Mobile Rack o will reset the temperature alarm

threshold to default (55°C/131°F).

Produkt Specifikationer

Mærke:	StarTech.com
Kategori:	Ikke kategoriseret
Model:	HSB110SATBK
Bredde:	150 mm
Dybde:	180 mm
Højde:	40 mm
Vægt:	689 g
Produktfarve:	Sort, sølv
Pakkevægt:	812 g
Pakkedybde:	215 mm
Pakkebredde:	170 mm
Pakkehøjde:	55 mm
Opbevaringstemperatur (T-T):	-40 - 70 °C
Relativ luftfugtighed ved drift (H-H):	8 - 90 %
Driftstemperatur (T-T):	5 - 80 °C
LED-indikatorer:	Ja
I/O-porte:	2 x SATA, 1 x LP4
Størrelse på lagerdisk:	3.5 "
Antal understøttede lagerdiske:	1
Understøttede lagerdrev brugerflader:	SATA
Hot-swap:	Ja