StarTech.com IES1G52UPDIN Manual

StarTech.com Ikke kategoriseret IES1G52UPDIN

Læs gratis den danske manual til StarTech.com IES1G52UPDIN (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 11 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 6 anmeldelser. Har du et spørgsmål om StarTech.com IES1G52UPDIN, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: June 10, 2020

5 Port Unmanaged Industrial-Grade Switch 10/100/1000 Mbps + 2 Open SFP & DIN Input

Product Diagram (IES1G52UPDIN)

Front View

Side View

Component Function

Power (PW) LED

Indicators

• Color - Green

• DIN P3 (top), Terminal P2 (middle), Terminal P1

(bottom)

• On - is connectedPW1/2/3

• O - is not connectedPW1/2/3

2RLY LED Indicator

• Color - Amber

• On - shortAlarm Relay

• O - openAlarm Relay

F5/6 Port LED

Indicators

• Color - Green

• F5 (top), F6 (bottom)

• On - link/connection is detectedSFP

• O - link/connection is not detectedSFP

• Flashing - is activeSFP

10 11

4PoE Ports

• Connect any to provide an Network Device Ethernet

Connection Network Devices to up to 4

• Provide a ( to 4 Power over Ethernet PoE) Connection

Devices

• Maximum power budget is 30W per port up to a PoE

total overall power budget of 126W

SFP Slots F6 (Left) and

F5 (Right)

• Supports 100/1000Base-X SFP Transceiver Modules

6DIP Switches • Enable or SFP Slot F5 T5 Network Port

7Non-PoE Port

• Provide an to one Ethernet Connection Network

Device

• Connect using a or Fiber Copper Network Cable

PoE Port LED

Indicators

• Indicates the link and statusPoE Powered Device (PD)

LNK(Green)

• On - Network connection detected

• O - Network connection not detected

PoE (Amber)

• On - is detectedPoE PD

• O - is not detectedPoE PD

9DIN Power Port • Connect a DIN Connector Terminated Power Supply

Terminal Block Power

Input Port

• Provides power to the PoE Ports

• Supported power input voltage range is 48-56V

11 Grounding Screw

• Attach a to protect Grounding Wire Network

Equipment

Requirements

For the latest requirements, please visit .www.startech.com/IES1G52UPDIN

• DC Power Supply x (up to) 2

• (Optional) DIN Connector Terminated Power Supply x 1

• PoE Powered Device x (up to) 4

• RJ45 Terminated UTP/STP Cat 5e (or better) Network Cable x (up to) 5

• MSA-Compliant 100/1000Base-X SFP Transceiver Module x (up to) 2

• Fiber Cable x (up to) 2

• Earth Ground Connection x 1

5 6

7 8

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC

rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated

in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of

this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the

interference at his own expense.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not

cause harmful interference, and (2) this device must accept any interference received, including interference that may cause

undesired operation.

Changes or modications not expressly approved by StarTech.com could void the user’s authority to operate the equipment.

Industry Canada Statement

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [A] est conforme à la norme NMB-003 du Canada.

CAN ICES-3 (A)/NMB-3(A)

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) This device may not cause interference, and (2) This device must accept any interference, including interference that may

cause undesired operation of the device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation

est autorisée aux deux conditions suivantes:

(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi,

même si le brouillage est susceptible d’en compromettre le fonctionnement.

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-

party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only

and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which

this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered

trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the

property of their respective holders.

PHILLIPS® is a registered trademark of Phillips Screw Company in the United States or other countries.

Warranty Information

This product is backed by a two-year warranty.

For further information on product warranty terms and conditions, please refer to .www.startech.com/warranty

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or

agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots,

loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the

product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the

limitations or exclusions contained in this statement may not apply to you.

Safety Measures

• If product has an exposed circuit board, do not touch the product under power.

Mesures de sécurité

• Si l’un des circuits imprimés du produit est visible, ne pas touchez le produit lorsqu’il est sous tension.

安全対策

• 製品に露出した状態の回路基盤が含まれる場合、電源が入っている状態で製品に触らないでください。

Misure di sicurezza

• Se il prodotto p2-ha un circuito stampato visibile, non toccare il prodotto quando è acceso.

Säkerhetsåtgärder

• Rör aldrig vid enheter med oskyddade kretskort när strömmen är påslagen.

FR: startech.com/fr

DE: startech.com/de

ES: startech.com/es

NL: startech.com/nl

IT: startech.com/it

JP: startech.com/jp

StarTech.com Ltd.

45 Artisans Cres

London, Ontario

N5V 5E9

Canada

StarTech.com Ltd.

Unit B, Pinnacle 15

Gowerton Rd,

Brackmills

Northampton

NN4 7BW

United Kingdom

StarTech.com LLP

2500 Creekside

Parkwy

Lockbourne, Ohio

43137

U.S.A.

• Grounding Wire x 1

• (Optional - for power) Flat Head Screwdriver x 1

• (Optional - for mounting) #2 Phillips Head Screwdriver x 1

• (Optional - for mounting) Screws for Wall Mounting x 2

Installation

Grounding the Switch

Connect a to the on the and to the Grounding Wire Grounding Point Switch Earth

Ground Connection.

Connect the Redundant Power Sources

Terminal Block

Connecting and installing the Terminal Block must be completed by a licensed

Electrician.

Notes: Make sure that you turn o the power source before connecting the power wire

to the Terminal Block.

Do not exceed the recommend voltage as it may result in personal or product damage.

This unit includes an additional . When two 24V@1A Relay Circuit Terminal Power

Sources Relay Open Mode Power Source are connected the stays in . If only one is

connects the switches to . Relay Short Mode

1. Connect the from a or the provided Power Wires DC Power Source (48 - 56V DC)

Barrel Power Connector Adapter Terminal Block Connectors Switchto the on the .

The terminals are marked on the exterior of the (connect the to Switch Positive Wire

V+ Negative Wire V- and the to ).

• Secure the by tightening the in the with a Wires Screws Terminal Block Flat

Head Screwdriver

2. (Optional) Repeat step 1 to add a redundant . Power Source

DIN Power

Connect a to an available DIN Connector Terminated Power Supply Power Source

and to the DIN Power Port Switchon the .

Power Pinout Diagram

Select the Default Function and Speed using the DIP Switches

Toggle the up and/or down to select the DIP Switches SFP Slot F5 (Right) or T5

Network Port Network Speed and the .

Note: If DIP 1 is set to T5 then DIP 2 must be set to 1000M.

Produkt Specifikationer

Mærke:	StarTech.com
Kategori:	Ikke kategoriseret
Model:	IES1G52UPDIN
Kode for international beskyttelse (IP):	IP30
Bredde:	105 mm
Dybde:	142 mm
Højde:	36.2 mm
Vægt:	492 g
Produktfarve:	Sort
Pakkevægt:	737 g
Pakkedybde:	162 mm
Pakkebredde:	211 mm
Pakkehøjde:	64 mm
Opbevaringstemperatur (T-T):	-40 - 85 °C
Relativ luftfugtighed ved drift (H-H):	5 - 95 %
Driftstemperatur (T-T):	-40 - 75 °C
Husmateriale:	Stål
Hurtig start guide:	Ja
Certificering:	CE, RoHS, FCC, UL
Strømforbrug (maks.):	126 W
Netværksstandarder:	IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Understøttede netværksprotokoller:	CSMA/CD
LED-indikatorer:	Link, PoE, Power
Kan monteres på væggen:	Ja
Harmoniseret systemkode (HS):	85176990
Hovedkassen højde (udvendigt):	225 mm
Hovedkassens længde (udvendigt):	345 mm
Hovedkassens bredde (udvendigt):	355 mm
DC indgangsspænding:	48 - 56 V
Produkter pr. hovedkasse (udvendigt):	10 stk
Fuld duplex:	Ja
Strøm over Ethernet (PoE):	Ja
Gennemsnitstid mellem fejl (MTBF):	525058 t
Switch-type:	Ikke administreret
Total Power over Ethernet (PoE):	120 W
Power over Ethernet plus (PoE+) porte, antal:	4
Power over Ethernet (PoE) effekt pr. port:	30 W
10G understøttelse:	Ingen
Auto MDI/MDI-X:	Ja
Flowkontrol support:	Ja
Kobber ethernet kabelteknologi:	10BASE-T, 10BASE-TX, 1000BASE-T, 1000BASE-TX
Basis omskiftning RJ-45 Ethernet porte, antal:	5
Basis omskiftning RJ-45 Ethernet porttype:	Gigabit Ethernet (10/100/1000)
MAC adresselabel:	- entries
Switch kapacitet:	12 Gbit/sek.
Jumbo Frames support:	Ja
Jumbo rammer:	9000
Stativ-montering:	Ingen
Antal SFP modulslots:	2
Sikkerhed:	EN60950-1, MET (UL) 60950-1
DIN-skinne montering:	Ja
Auto-forhandling:	Ja
Pakke bufferlager:	1 MB
Klemrække port:	Ja
Klemrække inkluderet:	Ja
Overspændingsbeskyttelse:	2 kV
Beskyttelse ved overspænding:	Ja