StarTech.com IESC1G50UP Manual

StarTech.com Ikke kategoriseret IESC1G50UP

Læs nedenfor 📖 manual på dansk for StarTech.com IESC1G50UP (2 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 2 personer og blev bedømt med 3.9 stjerner i gennemsnit af 1.5 brugere

Download PDF

Side 1/2

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: June 9, 2020

Product Diagram (IESC1G50UP)

Front View

Side View

Component Function

1PoE Ports

• Connect any to provide an Network Device Ethernet

Connection Network Devices to up to 4

• Provide a to 4 PoE Connection Devices

• Maximum PoE power budget is 30W per port up to a

total overall power budget of 120W

5 Port Unmanaged Industrial-Grade PoE Switch 10/100/1000 Mbps

2PW2 LED Indicator

• Color - Green

• On - when and are connectedV2+ V2-

• O- when and are not connected V2+ V2-

3PW1 LED Indicator

• Color - Green

• On - when and are connectedV1+ V1-

• O- when and are not connectedV1+ V1-

4Non-PoE Port

• Connect any to provide an Network Device Ethernet

Connection Network Device to one

5PoE LED Indicators

• Indicates the link and status PoE Powered Device (PD)

of each PoE Port

LNK(Green)

• On - Network connection detected

• O - Network connection not detected

• Flashing - Network is active

PoE (Amber)

• On - is detectedPoE PD

• O - is not detectedPoE PD

Terminal Block Power

Input Port

• Provides power to the PoE Ports

• Supported power input voltage range is 48-56V

7Grounding Point

• Attach a to protect Grounding Wire Network

Equipment

Requirements

For the latest requirements, please visit .www.startech.com/IESC1G50UP

• DC Power Supply x 1 (maximum of 2)

• PoE Powered Device x (up to) 5

• RJ45 Terminated UTP/STP Cat 5e (or better) Network Cable (sold separately) x 5

• Earth Ground Connection x 1

• Grounding Wire x 1

• (Optional - for power) Flat Head Screwdriver x 1

• (Optional) #2 Phillips Head Screwdriver x 1

• (Optional) Screws for Wall Mounting x 2

6 7

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC

rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated

in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of

this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the

interference at his own expense.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not

cause harmful interference, and (2) this device must accept any interference received, including interference that may cause

undesired operation.

Changes or modications not expressly approved by StarTech.com could void the user’s authority to operate the equipment.

Industry Canada Statement

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [A] est conforme à la norme NMB-003 du Canada.

CAN ICES-3 (A)/NMB-3(A)

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) This device may not cause interference, and (2) This device must accept any interference, including interference that may

cause undesired operation of the device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation

est autorisée aux deux conditions suivantes:

(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi,

même si le brouillage est susceptible d’en compromettre le fonctionnement.

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-

party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only

and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which

this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered

trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the

property of their respective holders.

PHILLIPS® is a registered trademark of Phillips Screw Company in the United States or other countries.

Warranty Information

This product is backed by a two-year warranty.

For further information on product warranty terms and conditions, please refer to .www.startech.com/warranty

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or

agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots,

loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the

product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the

limitations or exclusions contained in this statement may not apply to you.

Safety Measures

• • If product has an exposed circuit board, do not touch the product under power.

Mesures de sécurité

• • Si l’un des circuits imprimés du produit est visible, ne pas touchez le produit lorsqu’il est sous tension.

安全対策

• • 製品に露出した状態の回路基盤が含まれる場合、電源が入っている状態で製品に触らないでください。

Misure di sicurezza

• • Se il prodotto p2-ha un circuito stampato visibile, non toccare il prodotto quando è acceso.

Säkerhetsåtgärder

• • Rör aldrig vid enheter med oskyddade kretskort när strömmen är påslagen.

FR: startech.com/fr

DE: startech.com/de

ES: startech.com/es

NL: startech.com/nl

IT: startech.com/it

JP: startech.com/jp

StarTech.com Ltd.

45 Artisans Cres

London, Ontario

N5V 5E9

Canada

StarTech.com Ltd.

Unit B, Pinnacle 15

Gowerton Rd,

Brackmills

Northampton

NN4 7BW

United Kingdom

StarTech.com LLP

2500 Creekside

Parkwy

Lockbourne, Ohio

43137

U.S.A.

4. Insert two (sold separately) through the and into the Screws Wall Mount Brackets

Mounting Surface.

5. Tighten the using the appropriate .Screws Screwdriver

DIN Rail Mounting

1. Align the holes in the with the holes in the back of the .DIN Rail Bracket Switch

2. Insert three through the and into the Phillips Head Screws DIN Rail Bracket

Switch.

3. Tighten the using a .Phillips Head Screws Phillips Head Screwdriver

4. Hang the top of the (the section with the two metal clips) onto a DIN Rail Bracket

Top Hat DIN Rail style .

5. Press the down and forward to lock the bottom section onto the DIN Rail Bracket

DIN Rail.

Installation

Grounding the Switch

Connect a to the on the and to the Grounding Wire Grounding Point Switch Earth

Ground Connection.

Connect the Power Source

Connecting and installing the Terminal Block must be completed by a licensed

Electrician.

Notes: Make sure that you turn o the power source before connecting the power wire

to the Terminal Block.

Do not exceed the recommend voltage as it may result in personal or product damage.

Connect the from a or the provided Power Wires DC Power Source (48 - 56V DC)

Barrel Power Connector Adapter Terminal Block Connectors Switchto the on the .

The terminals are marked on the exterior of the (connect the to Switch Positive Wire

V+ Negative Wire V- and the to ).

• Secure the by tightening the in the with a Wires Screws Terminal Block Flat Head

Screwdriver

Connecting the Switch

Connect a to the and to any one of the on Network Cable Network Device PoE Ports

the . Repeat up to four times. Switch

(Optional) Mounting the Switch

Wall Mounting

1. Align the holes in the with the holes in the back of the .Wall Mount Brackets Switch

2. Insert two through each and into the Phillips Head Screws Wall Mount Bracket

Switch.

3. Tighten the using a (sold Phillips Head Screws Phillips Head Screwdriver

separately).

Produkt Specifikationer

Mærke:	StarTech.com
Kategori:	Ikke kategoriseret
Model:	IESC1G50UP
Kode for international beskyttelse (IP):	IP30
Bredde:	81.5 mm
Dybde:	104 mm
Højde:	32 mm
Vægt:	150.6 g
Produktfarve:	Sort
Pakkevægt:	392.6 g
Pakkedybde:	162 mm
Pakkebredde:	211 mm
Pakkehøjde:	64 mm
Opbevaringstemperatur (T-T):	-40 - 85 °C
Relativ luftfugtighed ved drift (H-H):	5 - 95 %
Driftstemperatur (T-T):	-40 - 75 °C
Husmateriale:	Stål
Hurtig start guide:	Ja
Certificering:	CE, FCC, RoHS, UL
Netværksstandarder:	IEEE 802.3, IEEE 802.3af, IEEE 802.3at, IEEE 802.3x
Understøttede netværksprotokoller:	CSMA/CD
LED-indikatorer:	Ja
Kan monteres på væggen:	Ja
Harmoniseret systemkode (HS):	85176990
Hovedkassen højde (udvendigt):	225 mm
Hovedkassens længde (udvendigt):	345 mm
Hovedkassens bredde (udvendigt):	355 mm
DC indgangsspænding:	48 - 56 V
Produkter pr. hovedkasse (udvendigt):	10 stk
Fuld duplex:	Ja
Strøm over Ethernet (PoE):	Ja
Gennemsnitstid mellem fejl (MTBF):	538451 t
Strømstiktype:	Type N
Switch-type:	Ikke administreret
Total Power over Ethernet (PoE):	120 W
Power over Ethernet plus (PoE+) porte, antal:	5
Power over Ethernet (PoE) effekt pr. port:	30 W
10G understøttelse:	Ingen
Auto MDI/MDI-X:	Ja
Flowkontrol support:	Ja
Basis omskiftning RJ-45 Ethernet porte, antal:	5
Basis omskiftning RJ-45 Ethernet porttype:	Gigabit Ethernet (10/100/1000)
MAC adresselabel:	- entries
Switch kapacitet:	- Gbit/sek.
Jumbo Frames support:	Ja
Jumbo rammer:	9000
Stativ-montering:	Ingen
Sikkerhed:	EN60950-1
DIN-skinne montering:	Ja
Klemrække port:	Ja
Klemrække inkluderet:	Ja
Overspændingsbeskyttelse:	2 kV
Beskyttelse ved overspænding:	Ja
Maksimal kabellængde:	100 m