StarTech.com IESC1G80UP Manual

StarTech.com Ikke kategoriseret IESC1G80UP

Læs gratis den danske manual til StarTech.com IESC1G80UP (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 22 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 11.5 anmeldelser. Har du et spørgsmål om StarTech.com IESC1G80UP, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: June 18, 2020

Product Diagram (IESC1G80UP)

Front View

Side View

Component Function

1PoE Ports

• Connect any to provide an Network Device Ethernet

Connection Network Devices to up to 8

• Provide a to 8 PoE Connection Devices

• Maximum PoE power budget is 30W per port up to a

total overall power budget of 200W

2ERR LED Indicator

• Color - Amber

• On - Either or is connectedPW1 PW2

• O - Both and are connectedPW1 PW2

8 Port Unmanaged Industrial-Grade Switch 10/100/1000 Mbps

3PW2 LED Indicator

• Color - Green

• On - when and are connectedPW2+ PW2-

• O- when and are not connected PW2+ PW2-

4PW1 LED Indicator

• Color - Green

• On - when and are connectedPW1+ PW1-

• O- when and are not connectedPW1+ PW1-

5PoE LED Indicators

• Indicates the link and status PoE Powered Device (PD)

of each PoE Port

LNK(Green)

• On - Network connection detected

• O - Network connection not detected

PoE (Amber)

• On - is detectedPoE

• O - is not detectedPoE

Terminal Block Power

Input Port

• Provides power to the PoE Ports

• Supported power input voltage range is 48-56V

7Grounding Screw

• Attach a to protect Grounding Wire Network

Equipment

Requirements

For the latest requirements, please visit .www.startech.com/IESC1G80UP

• DC Power Supply x 1 (maximum of two)

• PoE Powered Device x (up to) 8

• RJ45 Terminated UTP/STP Cat 5e (or better) Network Cable (sold separately) x 8

• Earth Ground Connection x 1

• Grounding Wire x 1

• (Optional - for power) Flat Head Screwdriver x 1

• (Optional) #2 Phillips Head Screwdriver x 1

• (Optional) Screws for Wall Mounting x 2

Installation

Grounding the Switch

1. Using the loosen the on the . Phillips Head Screwdriver Grounding Screw Switch

2. Attach the to the . Grounding Wire Grounding Screw

6 7

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC

rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated

in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of

this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the

interference at his own expense.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not

cause harmful interference, and (2) this device must accept any interference received, including interference that may cause

undesired operation.

Changes or modications not expressly approved by StarTech.com could void the user’s authority to operate the equipment.

Industry Canada Statement

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [A] est conforme à la norme NMB-003 du Canada.

CAN ICES-3 (A)/NMB-3(A)

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) This device may not cause interference, and (2) This device must accept any interference, including interference that may

cause undesired operation of the device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation

est autorisée aux deux conditions suivantes:

(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi,

même si le brouillage est susceptible d’en compromettre le fonctionnement.

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-

party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only

and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which

this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered

trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the

property of their respective holders.

PHILLIPS® is a registered trademark of Phillips Screw Company in the United States or other countries.

Warranty Information

This product is backed by a two-year warranty.

For further information on product warranty terms and conditions, please refer to .www.startech.com/warranty

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or

agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots,

loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the

product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the

limitations or exclusions contained in this statement may not apply to you.

Safety Measures

• If product has an exposed circuit board, do not touch the product under power.

Mesures de sécurité

• Si l’un des circuits imprimés du produit est visible, ne pas touchez le produit lorsqu’il est sous tension.

安全対策

• 製品に露出した状態の回路基盤が含まれる場合、電源が入っている状態で製品に触らないでください。

Misure di sicurezza

• Se il prodotto ha un circuito stampato visibile, non toccare il prodotto quando è acceso.

Säkerhetsåtgärder

• Rör aldrig vid enheter med oskyddade kretskort när strömmen är påslagen.

FR: startech.com/fr

DE: startech.com/de

ES: startech.com/es

NL: startech.com/nl

IT: startech.com/it

JP: startech.com/jp

StarTech.com Ltd.

45 Artisans Cres

London, Ontario

N5V 5E9

Canada

StarTech.com Ltd.

Unit B, Pinnacle 15

Gowerton Rd,

Brackmills

Northampton

NN4 7BW

United Kingdom

StarTech.com LLP

2500 Creekside

Parkwy

Lockbourne, Ohio

43137

U.S.A.

(Optional) Mounting the Switch

Wall Mounting

1. Align the holes in the with the holes in the back of the Wall Mount Brackets

Switch.

2. Insert two through each and into the Phillips Head Screws Wall Mount Brackets

Switch.

3. Tighten the using a (sold Phillips Head Screws Phillips Head Screwdriver

separately).

Note: Be careful not to over-tighten the .Screws

4. Insert two (sold separately) through the and into the Screws Wall Mount Brackets

Mounting Surface.

5. Tighten the using the appropriate .Screws Screwdriver

DIN Rail Mounting

1. Align the holes in the with the holes in the back of the .DIN Rail Bracket Switch

2. Insert three through the and into the Phillips Head Screws DIN Rail Bracket

Switch.

3. Tighten the using a .Phillips Head Screws Phillips Head Screwdriver

Note: Be careful not to over-tighten the .Screws

4. Hang the top of the (the section with the two metal clips) onto a DIN Rail Bracket

Top Hat DIN Rail style .

5. Press the down and forward to lock the bottom section onto the DIN Rail Bracket

DIN Rail.

3. Tighten the .Grounding Screw

4. Connect the other end of the to the .Grounding Wire Earth Ground Connection

Connect the Power Source

Connecting and installing the Terminal Block must be completed by a licensed

Electrician.

Notes: Make sure that you turn o the power source before connecting the power wire

to the Terminal Block.

Do not exceed the recommend voltage as it may result in personal or product damage.

This unit includes an additional 24V@1A relay circuit. When two Power Sources are

connected the relay stays in . If only one Open Mode Power Source is connects the relay

switches to . Short Mode

Connect the from a to the Power Wires DC Power Source (48 - 56V DC) Terminal

Block Connectors Switch on the . The terminals are marked on the exterior of the

Switch Positive Wire V+ Negative Wire V- (connect the to and the to ).

• Secure the by tightening the in the with a Wires Screws Terminal Block Flat Head

Screwdriver

Connecting the Switch

1. Connect a to the and to any one of the Network Cable Network Device PoE Ports

on the . Switch

2. Connect a to a and to any one of the seven remaining Network Cable PoE PD PoE

Ports Switchon the . Repeat this step up to six times.

Produkt Specifikationer

Mærke:	StarTech.com
Kategori:	Ikke kategoriseret
Model:	IESC1G80UP
Kode for international beskyttelse (IP):	IP30
Bredde:	105 mm
Dybde:	142 mm
Højde:	39.6 mm
Vægt:	536 g
Produktfarve:	Sort
Pakkevægt:	781 g
Pakkedybde:	162 mm
Pakkebredde:	211 mm
Pakkehøjde:	64 mm
Husmateriale:	Aluminium
Hurtig start guide:	Ja
Certificering:	CE, FCC, UL, ROhS
Strømforbrug (maks.):	206 W
Netværksstandarder:	IEEE 802.3af, IEEE 802.3at, IEEE 802.3x
LED-indikatorer:	Ja
Kan monteres på væggen:	Ja
Harmoniseret systemkode (HS):	85176990
Hovedkassen højde (udvendigt):	225 mm
Hovedkassens længde (udvendigt):	345 mm
Hovedkassens bredde (udvendigt):	355 mm
DC indgangsspænding:	48 - 56 V
Produkter pr. hovedkasse (udvendigt):	10 stk
Fuld duplex:	Ja
Strøm over Ethernet (PoE):	Ja
Gennemsnitstid mellem fejl (MTBF):	693764 t
Switch-type:	Ikke administreret
Total Power over Ethernet (PoE):	200 W
Power over Ethernet plus (PoE+) porte, antal:	8
Power over Ethernet (PoE) effekt pr. port:	30 W
10G understøttelse:	Ingen
Auto MDI/MDI-X:	Ja
Flowkontrol support:	Ja
Basis omskiftning RJ-45 Ethernet porte, antal:	8
Basis omskiftning RJ-45 Ethernet porttype:	Gigabit Ethernet (10/100/1000)
MAC adresselabel:	- entries
Switch kapacitet:	16000 Gbit/sek.
Jumbo Frames support:	Ja
Jumbo rammer:	9000
Stativ-montering:	Ingen
Gigabit Ethernet (kobber) porte, antal:	8
Bufferstørrelse:	128 KB
DIN-skinne montering:	Ja
Klemrække port:	Ja
Klemrække inkluderet:	Ja
Understøttede kabeltyper:	Cat5e, Cat6
Overspændingsbeskyttelse:	2 kV
Beskyttelse ved overspænding:	Ja