StarTech.com MCMGBSCSM10 Manual

StarTech.com Ikke kategoriseret MCMGBSCSM10

Læs gratis den danske manual til StarTech.com MCMGBSCSM10 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 26 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 13.5 anmeldelser. Har du et spørgsmål om StarTech.com MCMGBSCSM10, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Quick-start guide

FR: Guide de l’utilisateur - fr.startech.com

DE: Bedienungsanleitung - de.startech.com

ES: Guía del usuario - es.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

IT: Guida per l’uso - it.startech.com

Manual Revision: 10/12/2017

For the latest information, technical specications, and support for

this product, please visit www.StarTech.com/MCMGBSCSM10.

Package contents

• 1 x media converter

• 1 x universal power adapter (NA/JP, UK, EU, ANZ)

• 1 x quick-start guide

Requirements

• Ethernet network (10/100/1000)

• Gigabit (1000Mbps) Fiber network

Requirements are subject to change. For the latest requirements,

please visit www.StarTech.com/MCMGBSCSM10.

MCMGBSCSM10

Gigabit Ethernet to SC Fiber Media Converter - 1000Base-LX - Single-mode - 10 km

*actual product may vary from photos

Product diagram

Right view

SC Fiber port

LED indicators

Link Fault Pass-through switch

RJ45 Ethernet port

Left view

Power adapter port

LED indicators

LED Status Description

PWR

Illuminated green Power is being

received

Not illuminated Power is not being

received

Fiber LNK/ACT

Illuminated green Link to Fiber port

detected

Not illuminated No link to Fiber port

detected

Blinking green Data is being received

or sent through the

Fiber port

TP LNK/ACT

Illuminated green Link to Ethernet port

detected

Not illuminated No link to Ethernet

port detected

Blinking green Data is being received

or sent through the

Ethernet port

TP 1000

Illuminated green Port is transmitting

data at 1000Mbps

Not illuminated Port is transmitting

data at 10/100Mbps

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a commercial installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com could void the user’s authority to operate the

equipment.

Industry Canada Statement

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [A] est conforme à la norme NMB-003 du Canada.

CAN ICES-3 (A)/NMB-3(A)

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to

StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s)

to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all

trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.

Technical Support

StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and

access our comprehensive selection of online tools, documentation, and downloads.

For the latest drivers/software, please visit www.startech.com/downloads

Warranty Information

This product is backed by a two-year warranty.

StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned for

repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages arising from

misuse, abuse, alteration, or normal wear and tear.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental,

consequential, or otherwise), loss of prots, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not

allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.

About Link Fault Pass-through

The MCMGBSCSM10 includes the LFP (Link Fault Pass-through)

function. This means that when a device (for example, an Ethernet

switch or router) is connected to the media converter and a

link fault occurs on the local side of the connection, the media

converter disconnects the link on the remote side of the connection.

As a result, the LFP function can immediately alert network

administrators to link errors, which can help to minimize the impact

and duration of link errors. The LFP function includes the Link Loss

Cary Forward (LLCF) and Link Loss Return (LLR) functions.

By default, the LFP function is enabled on the MCMGBSCSM10.

Turn o the LFP function

1. To disable the LFP function, disconnect the universal power

adapter from the power adapter port on the media converter.

2. Move the Link Fault Pass-through switch to the OFF position.

3. Reconnect the universal power adapter to the power adapter port

on the media converter.

About triple speed support

The RJ45 port on the MCMGBSCSM10 supports triple speed

(10/100/1000 BASE-T) auto negotiation. The media converter

automatically detects the link speed of the connected device and

defaults to that link speed.

Install the media converter

1. Turn o the device that you want to connect to the media

converter.

2. Connect a Fiber cable to the device that you’re connecting and

to the SC Fiber port on the media converter. Make sure that you

reverse the TX and RX leads between the device and the media

converter.

3. Connect an Ethernet cable to the device that you’re connecting

and to the RJ45 Ethernet port on the media converter.

4. Connect the universal power adapter to the power adapter port

on the media converter and an available AC power outlet. Verify

that the PWR LED on the media converter illuminates.

5. Turn on the power on the connected device. Verify that the FX

and TP link LEDs illuminate.

Produkt Specifikationer

Mærke:	StarTech.com
Kategori:	Ikke kategoriseret
Model:	MCMGBSCSM10
Bredde:	105 mm
Dybde:	70 mm
Højde:	26 mm
Vægt:	196 g
Produktfarve:	Sort
Pakkevægt:	560 g
Pakkedybde:	285 mm
Pakkebredde:	138 mm
Pakkehøjde:	66 mm
Opbevaringstemperatur (T-T):	-10 - 70 °C
Relativ luftfugtighed ved drift (H-H):	5 - 90 %
Ethernet LAN-porte (RJ-45):	1
Driftstemperatur (T-T):	0 - 50 °C
Ethernet LAN-datahastigheder:	10,100,1000 Mbit/s
Hurtig installationsvejledning:	Ja
Forbindelsesteknologi:	Ledningsført
Certificering:	CE, FCC
Netværksstandarder:	IEEE 802.1Q, IEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3x
LED-indikatorer:	Activity, Link, Power
Udgangsspænding:	5 V
Udgangsstrøm:	2.6 A
AC-adapter inkluderet:	Ja
Harmoniseret systemkode (HS):	85176990
Bæredygtighedscertifikater:	RoHS
Indgangsspænding:	100 - 240 V
Intern:	Ingen
Maksimal dataoverførselshastighed:	1000 Mbit/s
Indgangsstrøm:	0.5 A
Fiber optisk strømstik:	SC
Maksimal overførselsafstand:	10000 m
Bølgelængde:	1310 nm
Ekstern strømadapter:	Ja
Ethernet-grænsefladetype:	Fast Ethernet, Gigabit Ethernet
Gennemsnitstid mellem fejl (MTBF):	50000 t
Strømstiktype:	Type N
Auto MDI/MDI-X:	Ja
Opbevar-og-frem:	Ja
Jumbo Frames support:	Ja
Jumbo rammer:	9000
Fiberkanal porte:	1
Fibertilstandsstruktur:	Enkeltilstand
Duplex system:	Fuld
Indgående omregner interface:	10Base-T, 100Base-TX, 1000Base-T
Udgående omregner interface:	100Base-LX
Bølgelængde-division multipleksing (WDM):	Ingen