StarTech.com N2-M2-SSD-DUPLICATOR Manual

StarTech.com Ikke kategoriseret N2-M2-SSD-DUPLICATOR

Læs gratis den danske manual til StarTech.com N2-M2-SSD-DUPLICATOR (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 12 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 6.5 anmeldelser. Har du et spørgsmål om StarTech.com N2-M2-SSD-DUPLICATOR, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: March 12, 2025

Product ID

N2-M2-SSD-DUPLICATOR

Top

Front

Rear

Bidirectional M.2 NVMe to 2.5”/3.5” SATA Duplicator - USB-C - 10Gbps

Component Function

1SATA Drive Bay

• Insert a 2.5 / 3.5in SATA Drive

• Supports SATA I/II/III

2M.2 NVMe Drive Bay Insert an (M Key)• M.2 NVMe Drive

3M.2 Mounting Holes

• Secure the into position using the M.2 NVMe Drive

included Rubber M.2 Stando

4Drive LED Indicators

• Individual LEDs for and drive M.2 NVMe SATA

detection

• Solid: Drive(s) detected

• Flashing: Read/Write activity

5Progress LED Indicators

• Indicates progress from during the 25% to 100%

Duplication process

6DC Power Input Connect the included • Universal Power Adapter

7Power Switch Turn the or • Drive Duplicator On O

Source Drive Selector

Switch

• Select the and for cloningSource Target Drive

• If Source Drive is : Select M.2 M.2 NVMe -> SATA

• If Source Drive is : Select SATA SATA -> M.2 NVMe

9Clone Button

• Starts the processDrive Duplication

• See section for more informationOperation

10 USB-C Host Connection

• Connect the to an M.2 NVMe/SATA Duplicator

available on a USB-C Port Host Computer

• Only required for PC Mode

• Supports USB 10Gbps

Requirements

For the latest product information, technical specications, and declarations of

conformance, please visit: www.StarTech.com/N2-M2-SSD-DUPLICATOR

Package Contents

• M.2 NVMe/SATA Duplicator Dock x 1

• USB-C Cable x 1

• Rubber M.2 Stando x 2

• Power Adapter (NA/JP, UK, EU, ANZ) x 1

• Quick-Start Guide x 1

7 9

Regulatory Compliance

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment to an outlet on a dierent circuit than the receiver.

• Consult the dealer or an experienced radio/TV technician for help.

Any changes or modications not expressly approved by the party responsible for compliance could void the user’s authority

to operate the device. If shielded interface cables are included with the product, or if additional components or accessories are

designated for use with the installation, they must be used to ensure compliance with FCC regulations.

ISED Statement / Déclaration d’ISDE

CAN ICES-003(B) / NMB-003(B)

This Class B digital apparatus complies with Canadian ICES-003.

This device complies with ISED Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1)

this device may not cause interference, and (2) this device must accept any interference, including interference that may cause

undesired operation of the device.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Le présent appareil est conforme aux CNR d’ISDE Canada applicables aux appareils radio exempts de licence. L’exploitation est

autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’appareil doit accepter tout

brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.

Warranty Information

This product is backed by a two-year warranty.

For further information on product warranty terms and conditions, please refer to www.startech.com/warranty.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents)

for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots, loss

of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the

product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the

limitations or exclusions contained in this statement may not apply to you.

FR: startech.com/fr

DE: startech.com/de

ES: startech.com/es

NL: startech.com/nl

IT: startech.com/it

JP: startech.com/jp

StarTech.com

Ltd.

45 Artisans Cres

London, Ontario

N5V 5E9

Canada

StarTech.com Ltd.

Unit B, Pinnacle 15

Gowerton Rd,

Brackmills

Northampton

NN4 7BW

United Kingdom

StarTech.com LLP

4490 South Hamilton

Road

Groveport, Ohio

43125

U.S.A.

StarTech.com Ltd.

Siriusdreef 17-27

2132 WT Hoofddorp

The Netherlands

Clone a Drive

1. Ensure that the , located on the rear of the Source Drive Selector Switch M.2 NVMe/

SATA Duplicator, is set correctly.

Note: If the cloning direction is set incorrectly, the hard disk originally intended to be the

source will become the target disk, and the data will be lost

If the Source Drive is : Select M.2 NVMe M.2 NVMe -> SATA

If the Source Drive is : Select SATA SATA -> M.2 NVMe

2. Insert the and into the .M.2 NVMe Drive SATA Drive Drive Bays

3. Toggle the , located on the rear of the , to the Power Switch M.2 NVMe/SATA Duplicator

ON position.

4. Press and Hold the until the begin to ash. Clone Button Progress LED Indicators

Immediately release and press the once more. The will begin to Clone Button 25% LED

ash to indicate the duplication process is in progress.

Warning! Do not disconnect either drive or interrupt the process until the duplication

process has completed. Doing so may result in damage to the drive or lost data.

Note: As each 25% segment of the duplication process nishes, the corresponding LED

will turn solid, while the subsequent LED will begin to ash

5. When are no longer ashing and have become solid, the All Progress LED Indicators

duplication process is complete.

Note: If the M.2 NVMe/SATA Duplicator encounters an error, please check the LED

Indicator status

Status LED Behavior

Drive disconnected during cloning

• Drive LEDs: Disconnected drive LED ashing slowly

• Progress LEDs: Illuminated LEDs ashing slowly

Source Drive is larger than Target

Drive

• Drive LEDs: LEDs are not illuminated

• Progress LEDs: All LEDs are ashing alternately

Installation

Power the Drive Duplicator Dock

1. Connect the to the appropriate .Universal Power Adapter Regional Wall Clip

2. Connect the to the , located on the rear of Universal Power Adapter DC Power Input

the .M.2 NVMe/SATA Duplicator

3. Toggle the , located on the rear of the , to Power Switch M.2 NVMe/SATA Duplicator

the position.ON

Note: The M.2 NVMe/SATA Duplicator Dock should be powered o before removing or

adding drives to the Drive Bays.

Operation

Warning! M.2 Drives can become hot during duplication or prolonged data transfer

sessions. Avoid touching the M.2 Drives immediately after use to prevent burns or

damage. Allow the drives to cool down before removing/handling.

Connect to a Computer

1. Insert a into the .2.5 / 3.5in SATA Drive SATA Drive Bay

2. Insert an horizontally into the .M.2 NVMe Drive NVMe Drive Bay

3. Align the on the with the . M.2 Mounting Hole M.2 NVMe Drive NVMe Drive Bay

Secure the into position using the included .M.2 NVMe Drive Rubber Stopper

4. Connect the included from the , located on the rear of the USB-C Cable USB-C Port

Drive Duplicator Dock USB-C Port Host Computer, to an available on the .

5. The will automatically detect and install the required .Host Computer Drivers

Produkt Specifikationer

Mærke:	StarTech.com
Kategori:	Ikke kategoriseret
Model:	N2-M2-SSD-DUPLICATOR

Har du brug for hjælp?

Hvis du har brug for hjælp til StarTech.com N2-M2-SSD-DUPLICATOR stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret StarTech.com Manualer

StarTech.com FCREADMICRO3V2 Manual

28 Juli 2025

StarTech.com USB312SAT3 Manual

23 Juli 2025

StarTech.com PIB2M21 Manual

23 Juli 2025

StarTech.com P10Q4C-USB-CARD-LP Manual

14 Juli 2025

StarTech.com IH2006-KVM-EXTENDER Manual

5 Juli 2025

StarTech.com N2-M2-SSD-DUPLICATOR Manual

20 Juni 2025

StarTech.com IES61002POE Manual

16 Juni 2025

StarTech.com IES51GPOEPD Manual

9 Juni 2025

StarTech.com I51G-ETHERNET-SWITCH Manual

8 Juni 2025

StarTech.com 35S24M2NGFF Manual

8 Juni 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Daikin EWLH170J-SS Manual

11 August 2025

Daikin VAM250FA8VE1 Manual

11 August 2025

Daikin VAM500FC Manual

11 August 2025

Daikin EKRP1B2A Manual

11 August 2025

Samsung AM300MXVANR Manual

11 August 2025

Hyundai IC420XE-25 Manual

11 August 2025

Daikin VAM2000J7VEB Manual

11 August 2025

Daikin EKEXVA500 Manual

11 August 2025

Daikin EKMBDXA7V1 Manual

11 August 2025

Daikin EKEXV100 Manual

11 August 2025