StarTech.com PCIVGAV7 Manual

StarTech.com Videokort PCIVGAV7

Læs gratis den danske manual til StarTech.com PCIVGAV7 (2 sider) i kategorien Videokort. Denne vejledning er vurderet som hjælpsom af 11 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 6 anmeldelser. Har du et spørgsmål om StarTech.com PCIVGAV7, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Thank you for purchasing a StarTech.com PCIVGAV7 PCI VGA Video Card. This

convenient video card is fully compliant with PCI 2.2 and provides high quality 2D

display at resolutions of up to 1600 x 1200 pixels.

Compliant with PCI 2.2 (33/66 MHz) •

Maximum 2D Resolution for 32-bit (1280x1024 @60Hz) and 16-bit (1600x1200 •

@ 75Hz)

Maximum color depth up to 16.7M colors output •

1 X Driver CD •

1 X Instruction Manual •

1 X Video Card •

D-Sub RGB (VGA) Connector1.

PCI Interface2.

1 2

Make sure that your system is unplugged and you are grounded.1.

Remove the cover of your system (see your computer’s user manual for details, 2.

if necessary) and gently turn your computer onto its side, so that the PCI

expansion slot openings on the motherboard are facing upwards.

Locate an empty PCI slot (usually white in color) and remove the metal plate 3.

that covers the corresponding rear bracket.You may need a Phillips screwdriver

to perform this step. Retain the screw! You will need it to secure the card later.

Gently insert the card into the empty slot, making sure it is ﬁrmly seated.4.

Secure the card in place using the screw you removed in Step 3, as applicable.5.

Replace and secure the computer cover. 6.

Open the 1. ﬁle located in the following path: X:\Windows 2000_XP\ Setup.exe

setup.exe, where X: designates the CD/DVD-ROM drive.

When the InstallShield welcome screen appears, click2. . If you receive a Next

notiﬁcation that the software has not passed Windows Logo testing, click

Continue Anyway to proceed with the installation.

Once all ﬁles have been installed, select 3. Yes, I want to restart my computer

now, and click to restart your computer and complete the installation Finish

process. If you wish to verify the installation, open the Device Manager and

check that the drivers have been recognized.

Once the computer has successfully rebooted, your new VGA port is ready for 4.

use.

Speciﬁcation PCIVGAV7

Interface PCI 2.2 33/66MHz

Chipset XGI Volari™ Z7

Memory 16MByte DDR RAM

Port Type D-Sub RGB (VGA) Connector

Power Consumption 1.4W

OS Support Windows XP/2000/Vista™; Linux

Environment

Operating Temperature: -10 C ~ 85 C

Storage Temperature: -20 C ~ 90 C

Operating Humidity: 5 ~ 95% RH

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in

a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on,

the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.•

Increase the separation between the equipment and receiver.•

Connect the equipment into an outlet on a circuit different from that to which the receiver •

is connected.

Consult the dealer or an experienced radio/TV technician for help.•

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to

StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an

endorsement of the product(s) to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of

this document, StarTech.com hereby acknowledges that all trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in

this manual and related documents are the property of their respective holders.

StarTech.com’s lifetime technical support is an integral part of our commit-ment to provide industry-leading solutions. If you ever need help with your product, visit www.

startech.com/support and access our comprehensive selection of online tools, documentation, and downloads.

This product is backed by a lifetime warranty.

In addition, StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this

period, the products may be returned for repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com

does not warrant its products from defects or damages arising from misuse, abuse, alteration, or normal wear and tear.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ofﬁcers, directors, employees or agents) for any damages (whether direct or indirect,

special, punitive, incidental, consequential, or otherwise), loss of proﬁts, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed

the actual price paid for the product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or

exclusions contained in this statement may not apply to you.