StarTech.com PEX4SFF8643 Manual

StarTech.com Ikke kategoriseret PEX4SFF8643

Læs gratis den danske manual til StarTech.com PEX4SFF8643 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 17 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 9 anmeldelser. Har du et spørgsmål om StarTech.com PEX4SFF8643, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Quick-start guide

FR: Guide de l’utilisateur - fr.startech.com

DE: Bedienungsanleitung - de.startech.com

ES: Guía del usuario - es.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

IT: Guida per l’uso - it.startech.com

Manual Revision: 04/08/2016

For the latest information, technical specications, and support for

this product, please visit www.startech.com/PEX4SFF8643.

Package contents

• 1 x p1-x4 PCI Express to SFF-8643 adapter

• 1 x low-prole bracket

• 1 x full-prole bracket (installed)

• 1 x quick-start guide

System requirements

• Computer enabled with PCI Express and an available PCIe x4, x8, or

x16 slot

• Phillips head screwdriver

PEX4SFF8643

x4 PCI Express to SFF-8643 Adapter for PCIe Based U.2 SSD

*actual product may vary from photos

Product diagram

Mounting bracket

(full-prole pictured)

SFF-8643 connector

PCIe p1-x4

connector

Bracket screws

Install the low-prole bracket

The PEX4SFF8643 can be mounted in both low-prole and

full-prole computer systems. The full-prole bracket comes

preinstalled in the adapter but you can install the low-prole bracket

instead.

1. Use a Phillips head screwdriver to remove the two bracket screws

from the PEX4SFF8643.

2. Remove the full-prole bracket from the adapter.

3. Line up the low-prole bracket with the bracket holes on the back

of the adapter.

4. Insert the two bracket screws that you removed in step 1 and

tighten them in place.

Install the adapter in a computer

Warning! PC components can be severely damaged by static

electricity. If an anti-static strap isn’t available, discharge any built-

up static electricity by touching a large, grounded metal surface for

several seconds.

1. Turn o your computer and any devices or peripherals that are

connected to it (for example, printers, external storage, and so

on).

2. Unplug the power cable from the back of your computer.

3. Disconnect any peripheral devices that are connected to your

computer.

4. Open your computer case. For more information about how to

properly do this, consult the documentation that came with

your computer system.

5. Locate an open PCIe slot and remove the corresponding metal

cover plate from the back of your computer case. Consult the

documentation that came with your computer for details about

how to do this safely. This card works in PCIe slots of x4, x8, or

x16 lanes.

6. Gently insert the card into the open PCIe slot and use a

computer case screw (not included) to fasten the bracket to the

back of the case.

7. Connect the card to the drive.

8. Place the cover back onto your computer case.

9. Reconnect the power cable to the back of your computer and

all of the peripheral devices that you disconnected in step 3.

10. Turn on your computer.

Introduction

The PEX4SFF8643 converts SFF-8643 to PCI Express® for use with

PCIe SSDs, which enables you to use PCIe to connect a high-

performance PCIe based U.2 SSD to your computer.

The adapter can be mounted in both low-prole and full-prole

computer systems.

The PEX4SFF8643 is OS independent and doesn’t require any

additional drivers or software.

System requirements are subject to change. For the latest

requirements, please visit www.startech.com/PEX4SFF8643.

Note: To determine if the drive and motherboard that you’re using

are compatible, consult the technical specications that came with

the drive and motherboard.

LED posts

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com could void the user’s authority to operate the

equipment.

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.

CAN ICES-3 (B)/NMB-3(B)

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to

StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s)

to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all

trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.

Technical Support

StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and

access our comprehensive selection of online tools, documentation, and downloads.

For the latest drivers/software, please visit www.startech.com/downloads

Warranty Information

This product is backed by a two-year warranty.

StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned for

repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages arising from

misuse, abuse, alteration, or normal wear and tear.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental,

consequential, or otherwise), loss of prots, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not

allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.

There may be additional steps required to enable functionality,

such as installing drivers or updating the rmware for the drive or

motherboard. For more information, consult the documentation that

came with the drive or motherboard.

About the LED indicators

You can connect an LED to the LED pins on the adapter. The LED

terminals generate an activity LED, but the exact behavior of the LED

indicator depends on the SSD connected to the device.

Produkt Specifikationer

Mærke:	StarTech.com
Kategori:	Ikke kategoriseret
Model:	PEX4SFF8643
Bredde:	18 mm
Dybde:	81 mm
Højde:	44 mm
Vægt:	38 g
Produktfarve:	Rød
Pakkevægt:	111 g
Pakkedybde:	177 mm
Pakkebredde:	144 mm
Pakkehøjde:	31 mm
Opbevaringstemperatur (T-T):	-25 - 70 °C
Relativ luftfugtighed ved drift (H-H):	15 - 90 %
Driftstemperatur (T-T):	5 - 50 °C
Hurtig installationsvejledning:	Ja
LED-indikatorer:	Ja
Harmoniseret systemkode (HS):	84733020
Bæredygtighedscertifikater:	CE, RoHS
Hovedkassen højde (udvendigt):	322 mm
Hovedkassens længde (udvendigt):	495 mm
Hovedkassens bredde (udvendigt):	378 mm
Værtsgrænseflade:	PCIe
Intern:	Ja
Produkter pr. hovedkasse (udvendigt):	60 stk
Overholdelse af bæredygtighed:	Ja
Monteringsbeslag inkluderet:	Ja
Output-grænseflade:	U.2
Udvidelseskort standard:	PCIe 3.0
Udvidelseskort formfaktor:	Fuld højde/ lav profil