StarTech.com RKPW247015 Manual

StarTech.com Ikke kategoriseret RKPW247015

Læs gratis den danske manual til StarTech.com RKPW247015 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 12 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 6.5 anmeldelser. Har du et spørgsmål om StarTech.com RKPW247015, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Instruction Manual

DE: Bedienungsanleitung - de.startech.com

FR: Guide de l'utilisateur - fr.startech.com

ES: Guía del usuario - es.startech.com

IT: Guida per l'uso - it.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

Manual Revision: 04/05/2012

For the most up-to-date information, please visit: www.startech.com

Packaging Contents

• 1 x Power Strip

• 4 x Mounting Bracket

• 4 x Mounting Screw

• 4 x Backing Plate

System Requirements

• 42U of available internal Rack/Cabinet space

• 125VAC electrical outlet with NEMA 5-15 connector

RKPW247015

24 Outlet 125V 15A Rackmount Power Strip

*actual product may vary from photos

Installation

1. Locate an appropriate spot inside the rack to mount the power

strip, such as vertical side-mounting rails.

NOTE: The power strip can be mounted vertically or horizontally

to other surfaces, however mounting “up-side down” with the

power sockets facing downwards is not recommended. The weight

of the power strip and connected cables/peripherals in addition to

any downward force (i.e. the force of pulling cables from the power

sockets) could dislodge the power strip from the brackets.

2. Attach the mounting brackets to the rack rst, using the provided

screws and backing plate. Place the backing plate behind the

rack’s mounting post and place the mounting bracket in front.

The screw threads in from the mounting bracket side. Ideally the

mounting brackets should be evenly spaced across the entire

length of the power strip to provide the most stability.

3. The power strip can be snapped into the mounting brackets.

There are small grooves that run along the sides of the power

strip that the brackets latch onto.

4. Plug the power strip into an electrical outlet and toggle the power

switch to the ‘on’ position to energize the strip.

Specications

Connector Type(s) 1 - NEMA 5-15 Power (North America) Plug

24 - NEMA 5-15 Power (North America) Receptacle

Maximum Output

Voltage 125V

Nominal Input Voltage 120V

Nominal Output

Voltage 120V

Regulatory Derated

Input Current (North

America)

12A

Warranty Lifetime

Cable Length 10 ft [3 m]

Carton Quantity 6

Color Black

Product Height 72.05 in [1830 mm]

Product Length 1.5 in [38 mm]

Product Weight 6.63 lb [3 kg]

Product Width 0.98 in [25 mm]

Shipping (Package)

Weight 5.77 lb [2.6 kg]

Maximum Input

Current per Phase 15A

Maximum Total

Current Draw per

Phase

15A

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to StarTech.com. Where they occur

these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which this manual applies by the

third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all trademarks, registered trademarks,

service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.

Technical Support

StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access

our comprehensive selection of online tools, documentation, and downloads.

For the latest drivers/software, please visit www.startech.com/downloads

Warranty Information

This product is backed by a two year warranty.

In addition, StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned

for repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages arising from

misuse, abuse, alteration, or normal wear and tear.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their o cers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental,

consequential, or otherwise), loss of prots, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not allow

the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.