StarTech.com SATDUP13 Manual

StarTech.com Ikke kategoriseret SATDUP13

Læs gratis den danske manual til StarTech.com SATDUP13 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 15 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 8 anmeldelser. Har du et spørgsmål om StarTech.com SATDUP13, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Quick Install Guide

DE: Bedienungsanleitung - de.startech.com

FR: Guide de l'utilisateur - fr.startech.com

ES: Guía del usuario - es.startech.com

I T: Guida per l'uso - it.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

P T: Guia do usuário - pt.startech.com

Manual Revision: 11/01/2013

For the most up-to-date information, please visit: www.startech.com

Packaging Contents

• 1 x 1 to 3 HDD Duplicator/Eraser

• 4 x SATA Cables

• 1 x Daisy Chain Cable

• 1 x Power Adapter

• 3 x Power Cords (NA, UK, EU)

• 1 x Instruction Manual

WARNING! Hard drives and storage enclosures require careful

handling, especially when being transported. If you are not careful

with your hard disk, lost data may result. Always handle your hard

drive and storage device with caution. Be sure that you are properly

grounded by wearing an anti-static strap when handling computer

components or discharge yourself of any static electricity build-up

by touching a large grounded metal surface (such as the computer

case) for several seconds.

SATDUP13

1 to 3 Standalone Hard Drive Duplicator and Eraser

Hardware Installation

1. Ensure the power switch is set in the o position. Connect the

included power adapter from an available AC power outlet to the

Power Adapter Port on the back of the SATDUP13.

2. Using an included SATA Cable, attach the HDD you would like to

duplicate to the source port (rst port on the left, see below)

3. Using an included SATA Cable, connect up to 3 HDDs you would

like to have over written, or erased to the destination ports. (3

ports from right to left , see below)

WARNING! Any Data remaining on the destination drives will be

over written.

Note: If using less than 3 HDDs, drives should be connected from

left to right leaving port(s) closest to the right unoccupied.

4. Press the power switch to the “On” position, the SATDUP13 is now

ready to use.

Front

1. Display Screen

2. Navigation buttons

3. OK button

4. Esc button

5. SATA HDD source port

6. SATA HDD destination ports

Back

1. Power Switch

2. Power Adapter Port

3. Daisy Chain ports

Hardware Operation

Hard Drive Duplication

1. Using the Navigation buttons, locate “HDD Duplicator 1. Copy”

and press OK. Default copy mode is “System and Files”

NOTE: Please visit www.startech.com/downloads for the full

set of operating instructions.

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to

StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s)

to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all

trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.

Technical Support

StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access

our comprehensive selection of online tools, documentation, and downloads.

For the latest drivers/software, please visit www.startech.com/downloads

Warranty Information

This product is backed by a two year warranty.

In addition, StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned

for repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages arising from

misuse, abuse, alteration, or normal wear and tear.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental,

consequential, or otherwise), loss of prots, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not allow

the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.

3. Duplication will complete when the % indicator reaches 100%.

The destination drives now contain identical data to the

source drive.

Note: If the destination drives are larger than the source drive,

a single partition the size of the source drive will be on the

destination drive.

Hard Drive Eraser

1. Using the Navigation buttons, locate “HDD Duplicator 4. Erase”

and press OK

2. The erase function is used to delete the data in your HDD. Please

choose the appropriate erase method from the list below using

the navigation buttons then press okay.

3. Press OK to begin erasing process.

4. Once the erase has completed the result will be displayed.

Note: The number 4 at the beginning of each option below

represents the Erase heading on the main menu, the numbers:

1, .2, .3, etc. indicate the option within the Erase sub menu.

4.1 Quick Erase

The function will ONLY erase the index of the HDD, which is the

quickest way to erase it. Quick Erase will damage the data on the

HDD, so please make sure you have backed up all important data

before using this function.

4.2 Full Erase

The function will erase the whole drive by overwriting each sector

on the target HDD and will take longer than quick erase. Full Erase

will damage the data on the HDD, so please make sure you have

backed up all important data before using this function.

4.3 DoD Erase

DoD Erase is an erasing method that complies with the U.S.A.

Department of Defense (DoD) standard. It can guarantee the data

was fully deleted by erasing the HDD bit for bit three times. DoD

Erase will damage the data on the HDD, so please make sure you

have backed up all important data before using this function.

2. The duplicator will analyze the source drive and ensure all the

targets are ready, by verifying size. Once the drives have been

analyzed you will receive an indicator stating the duplicator

is ready. Press OK, and the system will begin duplication

automatically.

Produkt Specifikationer

Mærke:	StarTech.com
Kategori:	Ikke kategoriseret
Model:	SATDUP13
Vekselstrømsindgangsspænding:	110 - 240 V
Vægt:	950 g
Produktfarve:	Sort
Produkttype:	HDD duplikator
Pakkevægt:	2500 g
Pakkebredde:	450 mm
Pakkehøjde:	82 mm
Relativ luftfugtighed ved drift (H-H):	20 - 80 %
Driftstemperatur (T-T):	5 - 45 °C
Skærm:	LED
Dimensioner (BxDxH):	263 x 120 x 40 mm
Bæredygtighedscertifikater:	RoHS
Grænseflade:	SATA
Understøttede HDD-størrelser:	2.5, 3.5 "
Understøttede HDD-grænseflader:	Serial ATA III
Overførselshastighed:	14 GB/min
Antal samtidige kopier:	- Kopier