StarTech.com SSPMSVESA Manual

StarTech.com Flad panel støtte SSPMSVESA

Læs gratis den danske manual til StarTech.com SSPMSVESA (2 sider) i kategorien Flad panel støtte. Denne vejledning er vurderet som hjælpsom af 9 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 5 anmeldelser. Har du et spørgsmål om StarTech.com SSPMSVESA, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: July 24, 2019 3:57 PM

Product Diagram (SSPMSVESA)

Component Function

1VESA Mounting

Bracket

• Used to mount a StarTech.com Docking

Station Hub Monitor or to the back of a .

2VESA Mounting Holes

• Used to mount the to the back of a Adapter

Monitor Monitor’s VESA Mounting , using the

Pattern.

Note: VESA mounting sizes are 75x75 and

100x100.

3Mounting Holes • Used to mount a StarTech.com Docking

Station Hub Adapter or to the .

Requirements

For the latest requirements, please visit www.startech.com/SSPMSVESA

If you are using a that covers the on the back of Monitor Stand VESA Mounting Holes

the , a VESA compatible monitor mount will be require to use the .Monitor Adapter

Package Contents

• VESA Mounting Bracket x 1

• M3 x 5 mm Screws x 4

• M4 x 12 mm Screws x 4

• M4 x 20 mm Screws x 4

VESA Mount Adapter for StarTech.com Docking Stations and Hubs

• Spacers x 4

• Quick-Start Guide x 1

Attaching a StarTech.com Docking Station or Hub

1. Align the on the with the on the Mounting Holes Adapter Mounting Holes

StarTech.com Docking Station Hub or . The recessed hole pattern should be facing

outward so the will t properly.M3 x 5 mm (Countersunk) Screws

2. Insert the four through the on the M3 x 5 mm Screws Mounting Holes Adapter

and into the on the or .Mounting Holes Startech.com Docking Station Hub

3. Using a (sold separately) tighten the , Phillips Head Screwdriver M3 x 5 mm Screws

being careful not to over-tighten the .M3 x 5 mm Screws

Mounting the Adapter (Flush)

1. Place the screen facing down on a at, clean, and secure surface.Monitor

2. Align the on the with the on the Mounting Holes Adapter VESA Mounting Holes

back of the .Monitor

3. Align the with the on the back of the VESA Monitor Mount VESA Mounting Hole

Adapter, Adapter VESA Monitor Mount sandwiching the between the and the

back of the . Monitor

4. Insert four of the through the and the M4 x 12 mm Screws VESA Monitor Mount

Adapter Mounting Holes Monitor and into the on the back of the .

5. Using a , tighten the , being careful Phillips Head Screwdriver M4 x 12 mm Screws

not to over-tighten the .M4 x 12 Screws

Mounting the Adapter (Recessed)

Note: The and provided with the can be installed on Spacers Screws Adapter

monitors with VESA mounting holes with a maximum depth of 7mm.

1. Place the screen facing down on a at, clean, and secure surface.Monitor

2. Place the four over the on the back of the .Spacers VESA Mounting Holes Monitor

3. Align the on the with the on the back on the Mounting Holes Adapter Spacers

Monitor.

4. Align the with the on the back of the VESA Monitor Mount VESA Mounting Hole

Adapter Adapter VESA Monitor Mount, sandwiching the between the and the

Spacers.

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-

party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only

and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which

this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered

trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the

property of their respective holders.

Warranty Information

This product is backed by a ve-year warranty.

For further information on product warranty terms and conditions, please refer to .

www.startech.com/warranty

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents)

for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots, loss of

business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product.

Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations

or exclusions contained in this statement may not apply to you.

FR: startech.com/fr

DE: startech.com/de

ES: startech.com/es

NL: startech.com/nl

IT: startech.com/it

JP: startech.com/jp

StarTech.com Ltd.

45 Artisans Cres

London, Ontario

N5V 5E9

Canada

StarTech.com Ltd.

Unit B, Pinnacle 15

Gowerton Rd,

Brackmills

Northampton

NN4 7BW

United Kingdom

StarTech.com LLP

2500 Creekside

Parkwy

Lockbourne, Ohio

43137

U.S.A.

Product Dimensions

5. Insert four of the through the , M4 x 20 mm Screws VESA Monitor Mount, Adapter

and and into the on the back of the .Spacers Mounting Holes Monitor

6. Using a , tighten the , being careful Phillips Head Screwdriver M4 x 20 mm Screws

not to over-tighten the .M4 x 20 Screws

Mounting the Adapter While Using a Monitor Stand

If you are using a monitor stand with a VESA Mounting Pattern on the back of the

Monitor Adapter Monitor, the can still be mounted to the back of the .

1. Place the screen facing down on a at, clean, and secure surface.Monitor

2. Align the on the with the on the Mounting Holes Adapter VESA Mounting Holes

back of the .Monitor

3. Insert four of the through the on the M4 x 12 mm Screws VESA Mounting Hole

Adapter Mounting Holes Monitor and into the on the back of the .

4. Using a , tighten the , being careful Phillips Head Screwdriver M4 x 12 mm Screws

not to over-tighten the .M4 x 12 Screws

Produkt Specifikationer

Mærke:	StarTech.com
Kategori:	Flad panel støtte
Model:	SSPMSVESA
Bredde:	120 mm
Dybde:	214 mm
Højde:	3 mm
Vægt:	530 g
Produktfarve:	Sort
Pakkevægt:	600 g
Pakkedybde:	290 mm
Pakkebredde:	145 mm
Pakkehøjde:	5 mm
VESA montering:	Ja
Materiale:	Stål
Hovedkassen højde (udvendigt):	240 mm
Hovedkassens længde (udvendigt):	300 mm
Hovedkassens bredde (udvendigt):	240 mm
Produkter pr. hovedkasse (udvendigt):	20 stk
Kapabilitet:	DK30C2DPEP, DK30C2DPEPUE, DK30C2DPPD, DK30C2DPPDUE, TB3CDK2DP, TB3CDK2DPUE, HB31C3A1CS, HB31C4AS, HB31C2A1CGS
Skruer inkluderet:	Ja
Montering interface kompatibilitet (min.):	75 x 75 mm
Montering interface kompatibilitet (maks.):	100 x 100 mm