StarTech.com ST128HD20 Manual

StarTech.com Ikke kategoriseret ST128HD20

Læs gratis den danske manual til StarTech.com ST128HD20 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 10 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 5.5 anmeldelser. Har du et spørgsmål om StarTech.com ST128HD20, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/2
Quick-Start Guide
Manual Revision: 07/12/2018
Product Design
Actual product may vary from photos
Front View
Rear View
Package Contents
• HDMI Splitter x 1
• Universal Power Adapter (NA/JP, UK, EU, ANZ) x 1
Requirements
Operating system requirements are subject to change. For the
latest requirements, please visit .www.startech.com/ST128HD20
Video Source
• HDMI Video Source x 1
Display
The number of displays required will depend on your display
conguration.
• HDMI Display Device x 8
Cables
The number of cables required will depend on your device
conguration.
• HDMI Cables x 9
SKU #: ST128HD20
8-Port HDMI Video Splitter - 4K 60Hz
Installation
1. Connect an , to the on the HDMI Cable HDMI Input Port HDMI
Splitter.
2. Connect the other end of the to the HDMI Cable HDMI Output
Port Video Source Device on the .
3. Connect an , to the on the HDMI Cable Output 1 Port HDMI
Splitter.
4. Connect the other end of the to the HDMI Cable HDMI Input
Port HDMI Display Device on the .
5. To connect extra to the , repeat Display Devices HDMI Splitter
Steps 1 - 2 (a max. of 8 can be connected to the Display Devices
HDMI Splitter).
6. Connect the to the on the Universal Power Adapter DC/5V Port
HDMI Splitter Universal Power . Connect the other end of the
Adapter AC Electrical Outlet to an .
7. Turn on the .HDMI Video Source
8. Turn on the .HDMI Display Device(s)
EDID
EDID settings are copied from the that is HDMI Display Device
connected to the and applied to the other Output 1 Port HDMI
Display Devices HDMI Splitter connected to the .
Note: Make sure to connect the display with the lowest resolution
to the , to ensure that all connected Output 1 Port HDMI
Display Devices using the lowest EDID settings for compatibility.
LED Indicators
LED Status
Power LED
Lights when the is HDMI Splitter
connected to a power source.
Output LEDs
Lights when an active video display
is connected to the Output Port.
For the latest information, specications, and support visit www.startech.com/ST128HD20.
On/O
Button
Power
LED
Output 1 - 8
LED
Reset
Button
Output 5 - 8
Ports
Input
Port
DC/5V
Port
Output 1 - 4
Ports
Safety Measures
• If product has an exposed circuit board, do not touch the product under power.
• If Class 1 Laser Product. Laser radiation is present when the system is open.
• Wiring terminations should not be made with the product and/or electric lines under power.
• Product installation and/or mounting should be completed by a certied professional as per
the local safety and building code guidelines.
• Cables (including power and charging cables) should be placed and routed to avoid creating
electric, tripping or safety hazards.
Mesures de sécurité
• Si l’un des circuits imprimés du produit est visible, ne pas touchez le produit lorsqu’il est sous
tension.
• Si le produit est Laser de Classe 1, le rayonnement laser est présent lorsque le système est
ouvert.
• Les terminaisons de câblâge ne doivent pas être eectuées lorsque le produit et/ou les câbles
électriques sont sous tension.
• L’installation et/ou le montage du produit doit être réalisé par un professionnel certié et
dans le respect des normes locales et du code de construction local.
• Les câbles (y compris les câbles d’alimentation et de chargement) doivent être placés et
acheminés de façon à éviter tout risque électrique, de chute ou de sécurité
安全対策
• 製品に露出した状態の回路基盤が含まれる場合、電源が入っている状態で製品に触らないでください。
• クラス1レーザー製品では、システムが開放状態の場合、レーザー光が照射されています。
• 電源が入っている状態の製品または電線の終端処理を行わないでください。
• 製品の設置やマウントは、使用地域の安全ガイドラインおよび建築基準に従い、有資格の専門業者が行うようにしてください。
• ケーブル（電源ケーブルと充電ケーブルを含む）は、適切な配置と引き回しを行い、電気障害やつまづきの危険性など、安全上のリスクを回避するよ
うにしてください。
Misure di sicurezza
• Se il prodotto ha un circuito stampato visibile, non toccare il prodotto quando è acceso.
• Prodotto laser di Classe 1. Quando il sistema è aperto sono presenti radiazioni laser.
• I terminiali dei li elettrici non devono essere realizzate con il prodotto e/o le linee elettriche
sotto tensione.
• L’installazione e/o il montaggio dei prodotti devono essere eseguiti da un tecnico
professionale certicato che conosca le linee guida locali sulle norme edilizie e sulla sicurezza.
• I cavi (inclusi i cavi di alimentazione e di ricarica) devono essere posizionati e stesi in modo da
evitare pericoli di inciampo, rischi di scosse elettriche o pericoli per la sicurezza.
Säkerhetsåtgärder
• Rör aldrig vid enheter med oskyddade kretskort när strömmen är påslagen.
• Om laserproduktet är Klasse 1, laserstrålning avges när systemet är öppet.
• Montering av kabelavslutningar får inte göras när produkten och/eller elledningarna är
strömförda.
• Installation och/eller montering får endast göras av behöriga yrkespersoner och enligt
gällande lokala förordningar för säkerhet och byggnormer.
• Kablar (inklusive elkablar och laddningskablar) ska dras och placeras på så sätt att risk för
snubblingsolyckor och andra olyckor kan undvikas.
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
o and
on, the user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation. Changes or
modications not expressly approved by StarTech.com could void the user’s authority to operate
the equipment.
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.
CAN ICES-3 (B)/NMB-3(B)
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to
the following two conditions:
(1) This device may not cause interference, and (2) This device must accept any interference,
including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio
exempts de licence. L’exploitation est autorisée aux deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter
tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le
fonctionnement.
IC Radiation Exposure Statement
This equipment complies with IC RSS-102 radiation exposure limit set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 0.5cm
between the radiator and your body.
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected
names and/or symbols of third-party companies not related in any way to StarTech.com.
Where they occur these references are for illustrative purposes only and do not represent an
endorsement of a product or service by StarTech.com, or an endorsement of the product(s)
to which this manual applies by the third-party company in question. StarTech.com hereby
acknowledges that all trademarks, registered trademarks, service marks, and other protected
names and/or symbols contained in this manual and related documents are the property of their
respective holders.
Technical Support
StarTech.com’s lifetime technical support is an integral part of our commitment to provide
industry-leading solutions. If you ever need help with your product, visit www.startech.com/
support and access our comprehensive selection of online tools, documentation, and downloads.
For the latest drivers/software, please visit www.startech.com/downloads
Warranty Information
This product is backed by a one-year warranty. StarTech.com warrants its products against defects
in materials and workmanship for the periods noted, following the initial date of purchase. During
this period, the products may be returned for repair, or replacement with equivalent products at
our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its
products from defects or damages arising from misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers,
directors, employees or agents) for any damages (whether direct or indirect, special, punitive,
incidental, consequential, or otherwise), loss of prots, loss of business, or any pecuniary loss,
arising out of or related to the use of the product exceed the actual price paid for the product.
Some states do not allow the exclusion or limitation of incidental or consequential damages. If
such laws apply, the limitations or exclusions contained in this statement may not apply to you.
StarTech.com Ltd.
45 Artisans Cres.
London, Ontario
N5V 5E9
Canada
StarTech.com LLP
2500 Creekside Pkwy.
Lockbourne, Ohio
43137
U.S.A.
StarTech.com Ltd.
Unit B, Pinnacle 15
Gowerton Rd., Brackmills
Northampton
NN4 7BW
United Kingdom
FR: fr.startech.com
DE: de.startech.com
ES: es.startech.com
IT: it.startech.com
JP: jp.startech.com
NL: nl.startech.com
For manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Quick Start Guide
SKU #: ST128HD20

Produkt Specifikationer

Mærke: StarTech.com
Kategori: Ikke kategoriseret
Model: ST128HD20

Har du brug for hjælp?

Hvis du har brug for hjælp til StarTech.com ST128HD20 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret StarTech.com Manualer

StarTech.com

StarTech.com RMCRAILS Manual

4 Oktober 2025
StarTech.com

StarTech.com F35023-USB-EXTENDER Manual

4 Oktober 2025
StarTech.com

StarTech.com TBLT3MM2M Manual

3 Oktober 2025
StarTech.com

StarTech.com CMVER40UD Manual

3 Oktober 2025
StarTech.com

StarTech.com RKUNITAPE Manual

3 Oktober 2025
StarTech.com

StarTech.com RK2537BKM Manual

28 September 2025
StarTech.com

StarTech.com ET90110SC2 Manual

9 September 2025
StarTech.com

StarTech.com PEX1S553LP Manual

9 September 2025
StarTech.com

StarTech.com ET90110ST2 Manual

9 September 2025
StarTech.com

StarTech.com CALW-DESK-CABLE-TRAY Manual

22 August 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

ResMed

ResMed Narval CC Manual

19 Oktober 2025
Dormakaba

Dormakaba CenTran 4 Manual

19 Oktober 2025
ResMed

ResMed AirFit N10 Manual

19 Oktober 2025
CRUX

CRUX SWRCR-59LV Manual

19 Oktober 2025
Dormakaba

Dormakaba Crane S1 Manual

19 Oktober 2025
Shape

Shape BP8000 Manual

19 Oktober 2025
Shape

Shape ALPKIT Manual

19 Oktober 2025
Shape

Shape COMPOFIC Manual

19 Oktober 2025
ResMed

ResMed AirFit F10 Manual

18 Oktober 2025
Dormakaba

Dormakaba Auditcon T52 Manual

18 Oktober 2025