Steinberg 4Knob Rain Manual

Steinberg Ikke kategoriseret 4Knob Rain

Læs gratis den danske manual til Steinberg 4Knob Rain (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 14 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 7.5 anmeldelser. Har du et spørgsmål om Steinberg 4Knob Rain, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

4Knob Rain Manual

The 4Knob Rain is the third release of SampleTekk’s new and approved approach to sampled pianos.

Its four sounds and 88 presets provide you with a fast way of getting the sound you want for your

production. The four sounds and all presets in 4Knob Rain are produced by SampleTekk’s Grammy

winner and several times Grammy nominee, Niklas Flyckt. During production several exclusive,

vintage and very sought-after hardware was used, such as:

• Fairman TMEQ

• RCA BA-25A

• MXR Doubler

• Roland Dimension D

For the Reverb channel HALion’s built in REVerence is used, but with SampleTekk’s custom made

impulses made from different hardware reverb units, Spring reverb, plates and digital units. Some

of the impulses consists of a combination of several reverb types.

The Interface

The four main controls are where you set the blend. You can also mute and solo each sound.

Tip: When muting the sound, those samples are not triggered, so if you don’t use a particular sound,

rather than just pulling down the volume to zero, press the mute-button.

•Direct – The original piano signal

•Attitude

•Modulation

•Reverb

This is what you will see if you click the “Extended” button in the upper right corner of the control

panel:

From left to right:

•HB Volume — sets the volume of the hammerback sound (this is when the mechanics on the

piano return after releasing a key)

•Pedal Volume — sets the volume of the sustain pedal being pressed and released

•Sensitivity — turn clockwise to emphasises the higher velocities, counterclockwise for a

more mellow playing. This control is neutral when in 12 o’clock position

•Pre Delay — sets the pre delay of the reverb channel

•Size — sets the size of the reverb

•Time — sets the time of the reverb

•Ambience — sets the amount of room acoustic

•R — Turn on or off the Repedaling function. With this on, you can repeat sustain notes by

pressing down the sustain pedal directly after you have released it. In some occasions, you

might want to turn this off for a tighter sound

Produkt Specifikationer

Mærke:	Steinberg
Kategori:	Ikke kategoriseret
Model:	4Knob Rain

Har du brug for hjælp?

Hvis du har brug for hjælp til Steinberg 4Knob Rain stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Steinberg Manualer

Steinberg SBS-RT-1000N1 Manual

8 Juni 2025

Steinberg SBS-RT-1000N Manual

8 Juni 2025

Steinberg SBS-GT-1000 Manual

7 Juni 2025

Steinberg SBS-RT-1000 Manual

7 Juni 2025

Steinberg SBS-RT-5000C Manual

7 Juni 2025

Steinberg SBS-RT-1000N2 Manual

7 Juni 2025

Steinberg SBS-RT-1000C Manual

7 Juni 2025

Steinberg SBS-GT-2000 Manual

7 Juni 2025

Steinberg HALion Sonic SE 3 Manual

21 Februar 2025

Steinberg The Grand 3 Manual

20 Februar 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Vulcan 1024W Manual

15 Juni 2025

Backyard Pro 554PL2030 Manual

15 Juni 2025

Haier 1U18TE2HDA Manual

15 Juni 2025

AEG EWKEXT1 Manual

15 Juni 2025

Planet XGPN-400AXV Manual

15 Juni 2025

Cadac 3 Cook Turbo Manual

15 Juni 2025

Bobrick B-3944 Manual

15 Juni 2025

Sony SZC-4008 Manual

15 Juni 2025

Watts ETX-15 Manual

15 Juni 2025

Sigma REMOTE ONE Manual

15 Juni 2025