Steinberg Transverse Manual

Steinberg Ikke kategoriseret Transverse

Læs gratis den danske manual til Steinberg Transverse (11 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 52 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 26.5 anmeldelser. Har du et spørgsmål om Steinberg Transverse, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/11
About 2
General Usage 2
1.1 - Main Page - General 3
1.2 - Main Page - Envelope Section 3
1.2.1 - Reverse Envelope 4
1.2.2 - ADSR Envelope 4
1.3 - Main Page - Settings & FX 5
2.1 - Custom Page - General 5
2.1.1 - Wave Display 5
2.1.2 - Main Settings 6
2.2 - Custom Page - Sample 6
2.3 - Custom Page - Grain 7
2.4 - Custom Page - Sync2End 7
3.1 - Mod & FX Page - General 8
3.2 - Mod & FX Page - Curves 8
3.2.1 - Setting Curve Shapes 9
3.3 - Mod & FX Page - LFOs & ENVs 9
3.3.1 - Modulation Rows 10
3.4 - Mod & FX Page - XY Pad 10
4.1 - Automation - Best Practice 11
4.1.1 - Solutions 11
About
The name Transverse is a portmanteau of transition and reverse. As the name implies Transverse is a
Halion instrument that focuses on designing reverse sounds, sweeps, transitions, risers and
rhythmic riffs for your projects. With the ubiquity of such sounds in modern music and sound design,
having a focused tool that provides quick access to the most necessary parameters can greatly reduce
the need for repetitive tasks and keep creative flow going.
This is achieved through sample based noise profiles, granular and subtractive synthesis, combined
with built for purpose envelopes and modulation sources.
The workflow for designing such sounds can have many tedious or repetitive tasks such as:
● Finding adequate noise / sound sources
● Envelope pattern or sequence design
● Dealing with sync issues
● Multiple automation tracks for parameter motion
● Over complicated or deep modulation matrices
● Creating variations for reuse in a project
While using reverse snares and cymbals or synth white noise do work, issues of sound length, sync,
gate sequences and variation in design always come into play. Transverse makes this easy to achieve,
use and save for later recall or quick modification.
The layout logic behind Transverse was to create a rapid design environment to remedy the above
mentioned situations by having controls spread across the UI where they will be most needed. Having
controllers at you fingertips rather than having to dig through menus promotes the creative process and
reduces time spent on technical issues.
With its 36 noise profiles in 3 banks, 2 of which also contain 24 predefined oscillators and 100 preset
wave sources, combined with synced and rhythmic envelopes and XY modulation, creating such
sounds can be done in seconds.
All synced modulation can be switched to time based for sound designs that accompany visuals. Even
LFOs can be set in seconds rather than Hz, where long cycle LFOs can also double as envelopes.
General Usage
Transverse has 3 layers providing the noise sources, oscillators and samples to build sounds:
● Metallic Layer - Noise Profile x 12 / Custom Sample or Granular x 100
● Digital Layer - Noise Profile x 12 / Oscillator x 12
● Analogue Layer - Noise Profile x 12 / Oscillator x 12
Each layer’s noise profile has been generated to reflect its name, and can also be treated as high, mid
and low when building textures. This is just a guide though, but layer 2 and especially 3 do pitch down
quite well for atonal drones.
The tonal oscillators on the Digital layer covers more standard sounds, whereas the Analogue layer
caters for a grittier, sometimes more abstract sound. The Metallic layer also handles the custom sound
sources. When Custom is activated, the noise selector for the Metallic layer is deactivated.
The Custom page provides a selection of wave presets which cover pitched to atonal textures and
even short recordings of everyday items which can be used to enhance reverse designs or provide
rhythmic beds if looped or played as a granular source. User samples can be dropped on the display.
Modulation is provided by 3 different sources:
● Curves Env - Quickly generate rhythmic or long multistage envelopes
● LFOs / Env - Envelopes tied to reverse length and LFOs in sync, Hz or seconds
● XY Pad - Central point to control parameters for intuitive performances and automation
When using the reverse envelope, modulation envelope lengths are also controlled via reverse length.
When synced this updates with tempo and an entire reverse design’s length can be changed with one
knob.
Sync2End syncs samples to the end of a reverse design based on the sounds length. Great for syncing
shorter samples to the end of long reverse builds.
Multiple outputs can be activated under the instrument’s settings, provided that the Halion instance has
more than one output activated.
Midi mode can also be set to monophonic under settings on the main page.
2

Produkt Specifikationer

Mærke: Steinberg
Kategori: Ikke kategoriseret
Model: Transverse

Har du brug for hjælp?

Hvis du har brug for hjælp til Steinberg Transverse stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Steinberg Manualer

Steinberg

Steinberg SBS-LAB-150 Manual

15 August 2025
Steinberg

Steinberg SBS-UH-210 Manual

15 August 2025
Steinberg

Steinberg SBS-LEM-40ML Manual

15 August 2025
Steinberg

Steinberg SBS-LHM-5000 Manual

20 Juli 2025
Steinberg

Steinberg SBS-LS-100 Manual

20 Juli 2025
Steinberg

Steinberg SBS-THE-600 Manual

19 Juli 2025
Steinberg

Steinberg SBS-LHM-500/H Manual

19 Juli 2025
Steinberg

Steinberg SBS-DK-1000 Manual

19 Juli 2025
Steinberg

Steinberg SBS-MR-1600/1T PRO Manual

19 Juli 2025
Steinberg

Steinberg SBS-CT-500 Manual

19 Juli 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Cres Cor

Cres Cor H137WSUA5D Manual

20 August 2025
Moulinex

Moulinex Pulseo LM17GD Manual

20 August 2025
Tefal

Tefal EasyGrill BG1303 Manual

20 August 2025
Tenda

Tenda U2 Manual

20 August 2025
Tefal

Tefal Ultraglide Plus FV5841 Manual

20 August 2025
Tefal

Tefal I-Coach Touch QB950D Manual

20 August 2025
BEKO

BEKO BDIN38551P Manual

20 August 2025
BEKO

BEKO FSE52135DCRSN Manual

20 August 2025
Karma

Karma PRJ 5000 Manual

20 August 2025
Aqua-Vu

Aqua-Vu Micro Stealth 4.3 Manual

20 August 2025