
For additional assistance or service please contact:
customerservice@speakman.com
Cover your drain to prevent loss of parts.
Warranty information can be found at:
Be sure to read instructions thoroughly before
beginning installation. Do not overtighten any
connections or damage may occur.
Periodic cleaning using a mild soap and warm water
will help keep your Shower Head's appearance in its
For best results, dry immediately with a soft, clean
cloth. DO NOT USE harsh and/or abrasive cleaners.
In certain water conditions, mineral deposits may
form. To remove these deposits, it is recommended
that you soak the shower head in a solution of 2 parts
vinegar to 1 part water for one hour. Rinse thoroughly
with fresh water. Brush off any remaining mineral
deposits from the spray channels.
NOTE: Rain shower heads are intended to be used
with a vertical drop shower arm. If used at an angle,
the shower head will not produce the correct flow
Apply Thread Seal Tape to the outlet side of a
vertical drop shower arm.
Thread Shower Head onto shower arm by
turning it in a clockwise direction. Tighten with
Adjustable Wrench. Turn water supply on and
DIMENSIONS SUBJECT TO CHANGE WITHOUT NOTICE.
Max. Flow Rate: 1.75 gpm (6.6 L/min)
Min. Flow Rate: 1.5 gpm (5.7 L/min) @ 45psi
FOR USE WITH AUTOMATIC COMPENSATING VALVES RATED
AT 5.7 L/MIN (1.50 GPM) OR LESS.
Max. Flow Rate: 2.0 gpm (7.6 L/min)
Min. Flow Rate: 1.75 gpm (6.6 L/min) @ 45psi
FOR USE WITH AUTOMATIC COMPENSATING VALVES RATED
AT 6.6 L/MIN (1.75 GPM) OR LESS.
DIMENSIONS SUBJECT TO CHANGE WITHOUT NOTICE.
Max. Flow Rate: 1.75 gpm (6.6 L/min)
Min. Flow Rate: 1.5 gpm (5.7 L/min) @ 45psi
FOR USE WITH AUTOMATIC COMPENSATING VALVES RATED
AT 5.7 L/MIN (1.50 GPM) OR LESS.
Max. Flow Rate: 2.0 gpm (7.6 L/min)
Min. Flow Rate: 1.75 gpm (6.6 L/min) @ 45psi
FOR USE WITH AUTOMATIC COMPENSATING VALVES RATED
AT 6.6 L/MIN (1.75 GPM) OR LESS.