Stihl E 20 Manual

Stihl savemaskine E 20

Læs gratis den danske manual til Stihl E 20 (40 sider) i kategorien savemaskine. Denne vejledning er vurderet som hjælpsom af 19 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 10 anmeldelser. Har du et spørgsmål om Stihl E 20, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/40

Kickback Safety Precautions

!Warning!

Kickback may occur when the nose or

tip of the guide bar touches an object, or

when the wood closes in and pinches

the saw chain in the cut. Tip contact in

some cases may cause a lightning fast

reverse reaction, kicking the guide bar

up and back towards the operator.

Pinching the saw chain along the top of

the guide bar may push the guide bar

rapidly back towards the operator. Either

of these reactions may cause you to lose

control of the saw which could result in

serious personal injury.

Section 5.12 of ANSI B 175.1-2000 sets

certain performance and design criteria

related to chainsaw kickback. STIHL has

developed a color code system using

green and yellow to help you select a

powerhead, bar and chain combination

that complies with the kickback

requirements of the ANSI Standard.

See the sections entitled "Safety

Precautions" and "Specifications" of this

manual.

Do not rely exclusively upon the safety

devices built into your saw. As a

chainsaw user, you should take several

steps to keep your cutting jobs free from

accident or injury.

1. With a basic understanding of

kickback, you can reduce or

eliminate the element of surprise.

Sudden surprise contributes to

accidents.

2. Keep a good firm grip on the saw

with both hands, the right hand on

the rear handle, and the left hand on

the front handle, when the engine is

running. Use a firm grip with thumbs

and fingers encircling the chainsaw

handles. A firm grip will help you

reduce kickback and maintain

control of the saw. Don't let go.

3. Make sure the area in which you are

cutting is free from obstructions. Do

not let the nose of the guide bar

contact a log, branch, or any other

obstruction while you are operating

the saw.

4. Cut at high engine speeds.

5. Do not overreach or cut above

shoulder height.

6. Follow manufacturer's sharpening

and maintenance instructions for

the saw chain.

7. Only use replacement bars and

chains specified by the

manufacturer or the equivalent.

Other Safety Precautions

1. Do not operate a chainsaw with one

hand! Serious injury to the operator,

helpers, bystanders, or any

combination of these persons may

result from one-handed operation. A

chainsaw is intended to be used

with two hands.

2. Do not operate a chainsaw when

you are fatigued.

3. Use safety footwear; snug-fitting

clothing; protective gloves; and eye,

hearing, and head protection

devices.

4. Do not allow other persons to be

near the chainsaw when starting or

cutting with the chainsaw. Keep

bystanders and animals out of the

work area.

continued on the back inside cover

Important Safety Precautions for Chain Saw Users

Produkt Specifikationer

Mærke:	Stihl
Kategori:	savemaskine
Model:	E 20

Har du brug for hjælp?

Hvis du har brug for hjælp til Stihl E 20 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

savemaskine Stihl Manualer

Stihl MS 151 C Manual

16 August 2024

Stihl MS 650 Manual

15 August 2024

Stihl MS 462 C-M Manual

14 August 2024

Stihl MS 231 Manual

7 August 2024

Stihl MSE 190 C Manual

4 August 2024

Stihl MS 230 Manual

3 August 2024

Stihl MS 192 Manual

3 August 2024

Stihl MS 341 Manual

3 August 2024

Stihl MS 192 T Manual

1 August 2024

Stihl MS 310 Manual

1 August 2024

savemaskine Manualer

Nyeste savemaskine Manualer

Einhell GE-CS 18 Li Manual

15 Oktober 2024

15 Oktober 2024

15 Oktober 2024

14 Oktober 2024

13 Oktober 2024

Einhell TC-AP 650 E Manual

12 Oktober 2024

Einhell TE-SM 36/210 Li Solo Manual

11 Oktober 2024

Einhell BT-SM 2534 Manual

11 Oktober 2024

Hitachi C 7MFA(LA) Manual

9 Oktober 2024

Ozito ECS-406A Manual

6 Oktober 2024