Stihl MS 441 Manual
Stihl
savemaskine
MS 441
Læs nedenfor 📖 manual på dansk for Stihl MS 441 (124 sider) i kategorien savemaskine. Denne guide var nyttig for 24 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere
Side 1/124

{
Instruction Manual
Manual de instrucciones
Warning!
This saw is capable of severe kickback which
may cause serious or fatal injury. Only for
users with extraordinary cutting needs and
experience and training dealing with kickback.
Chainsaws with significantly reduced kickback
potential are available. STIHL recommends
the use of STIHL reduced kickback bar and
low kickback chain.
Advertencia!
Esta sierra es capaz de causar contragolpes
severos, los cuales pueden causar lesiones
graves o mortales. Sólo es apta para usuarios
con necesidades extraordinarias de corte y
mucha experiencia y capacitación en el
manejo de los contragolpes. Existen sierras
con un potencial mucho menor de causar
contragolpes. STIHL recomienda usar una
barra y cadena de contragolpe reducido de
STIHL.
Read and follow all safety precautions in
Instruction Manual – improper use can cause
serious or fatal injury.
Lea y siga todas las precauciones de
seguridad dadas en el manual de
instrucciones – el uso incorrecto puede causar
lesiones graves o mortales.

Original Instruction ManualPrinted on chlorine-free paper
Printing inks contain vegetable oils, paper can be recycled.
© ANDREAS STIHL AG & Co. KG, 2009
0458-219-8621-A. M10-5.C9.FST.
0000000830_001_GB
MS 441
English
1
{
Contents
Allow only persons who fully understand
this Manual to operate your chain saw.
To receive maximum performance and
satisfaction from your STIHL chain saw,
it is important that you read and
understand and follow the maintenance
and safety precautions in chapter
"Safety Precautions and Working
Techniques" before using your chain
saw. For further information you can go
to www.stihlusa.com.
Contact your STIHL dealer or the STIHL
distributor for your area if you do not
understand any of the instructions in this
manual.
Warning!
Because a chain saw is a high-speed
wood-cutting tool, some special safety
precautions must be observed as with
any other power saw to reduce the risk
of personal injury.
Careless or improper use may cause
serious or even fatal injury.
STIHL's philosophy is to continually
improve all of its products. As a result,
engineering changes and improvements
may be made from time-to-time. If the
operating characteristics or the
appearance of your chain saw differs
from those described in this manual,
please contact your STIHL dealer for
information and assistance.
Guide to Using this Manual 2
Safety Precautions and Working
Techniques 2
Cutting Attachment 23
Mounting the Bar and Chain 23
Tensioning the Chain 24
Check Chain Tension 24
Fuel 25
Fueling 25
Chain Lubricant 27
Filling Chain Oil Tank 27
Checking Chain Lubrication 28
Chain Brake 28
Winter Operation 29
Electric Handle Heating 30
Starting / Stopping the Engine 30
Operating Instructions 33
Oil Quantity Control 34
Taking Care of the Guide Bar 35
Air Filter System 36
Remove air filter 36
Clean standard filter 36
Clean HD filter 37
Engine Management 38
Adjusting the Carburetor 38
Spark Arresting Screen in Muffler 39
Spark Plug 39
Replacing the Starter Rope and
Rewind Spring 41
Storing the Machine 43
Checking and Replacing the Chain
Sprocket 43
Maintaining and Sharpening the
Saw Chain 44
Maintenance and Care 48
Main Parts 50
Specifications 52
Special Accessories 53
Ordering Spare Parts 53
Maintenance and Repairs 54
STIHL Incorporated Federal
Emission Control Warranty
Statement 54
Trademarks 56

MS 441
English
2
Pictograms
All the pictograms attached to the
machine are shown and explained in this
manual.
Symbols in text
The operating and safety instructions
are supported by illustrations.
The individual steps or procedures
described in the manual may be marked
in different ways:
NA bullet marks a step or procedure
without direct reference to an
illustration.
A description of a step or procedure that
refers directly to an illustration may
contain item numbers that appear in the
illustration. Example:
NLoosen the screw (1)
NLever (2) ...
In addition to the operating instructions,
this manual may contain paragraphs
that require your special attention. Such
paragraphs are marked with the
symbols and signal words described
below:
Engineering improvements
STIHL’s philosophy is to continually
improve all of its products. As a result,
engineering changes and improvements
are made from time to time. Therefore,
some changes, modifications and
improvements may not be covered in
this manual. If the operating
characteristics or the appearance of
your machine differ from those
described in this manual, please contact
your STIHL dealer for assistance.
Have your STIHL dealer show you how
to operate your power tool. All safety
precautions that are generally observed
when working with an axe or a hand saw
also apply to the operation of chain
saws. Observe all applicable federal,
state and local safety regulations,
standards and ordinances. When using
a chain saw for logging purposes, for
instance, refer to the OSHA regulations
for "logging operations" at 29 Code of
Federal Regulations 1910.266.
Guide to Using this Manual
Danger!
indicates an imminent risk of severe or
fatal injury.
Warning!
indicates a hazardous situation which, if
not avoided, could result in severe or
fatal injury.
Caution!
indicates a risk of property damage,
including damage to the machine or its
individual components.
Safety Precautions and
Working Techniques
Because a chain saw is a
high-speed, fast-cutting
power tool, special safety
precautions must be
observed to reduce the
risk of personal injury.
It is important that you
read, fully understand
and observe the following
safety precautions and
warnings. Read the
instruction manual and
the safety instructions
periodically. Careless or
improper use may cause
serious or fatal injury.
Warning!
Reactive forces, including kickback, can
be dangerous. Pay special attention to
the section on reactive forces.

MS 441
English
3
Use your chain saw only for cutting
wooden objects.
Most of these safety precautions and
warnings apply to the use of all STIHL
chain saws. Different models may have
different parts and controls. See the
appropriate section of your instruction
manual for a description of the controls
and the function of the parts of your
model.
Safe use of a chain saw involves
1the operator
2the saw
3the use of the saw.
THE OPERATOR
Physical Condition
You must be in good physical condition
and mental health and not under the
influence of any substance (drugs,
alcohol, etc.) which might impair vision,
dexterity or judgment. Do not operate
this machine when you are fatigued.
These conditions reduce the hand's
ability to feel and regulate temperature,
produce numbness and burning
sensations and may cause nerve and
circulation damage and tissue necrosis.
All factors which contribute to white-
finger disease are not known, but cold
weather, smoking and diseases or
physical conditions that affect blood
vessels and blood transport, as well as
high vibration levels and long periods of
exposure to vibration are mentioned as
factors in the development of whitefinger
disease. In order to reduce the risk of
whitefinger disease and carpal tunnel
syndrome, please note the following:
–Most STIHL power tools are
available with an anti-vibration
("AV") system designed to reduce
the transmission of vibrations
created by the machine to the
operator's hands. An AV system is
recommended for those persons
using power tools on a regular or
sustained basis.
–Wear gloves and keep your hands
warm. Heated handles, which are
available on some STIHL
powerheads, are recommended for
cold weather use.
–Keep the AV system well
maintained. A power tool with loose
components or with damaged or
worn AV elements will tend to have
higher vibration levels. Keep the
Warning!
Do not lend or rent your power tool with-
out the instruction manual. Be sure that
anyone using it understands the infor-
mation contained in this manual.
Warning!
The use of this machine may be hazard-
ous.The saw chain has many sharp
cutters. If the cutters contact your flesh,
they will cut you, even if the chain is not
moving. At full throttle, the chain speed
can reach 67 mph (30 m/s).
Warning!
Do not use it for other purposes, since
misuse may result in personal injury or
property damage, including damage to
the machine
Warning!
Minors should never be allowed to use
this power tool. Bystanders, especially
children, and animals should not be
allowed in the area where it is in use.
Warning!
To reduce the risk of injury to bystand-
ers and damage to property, never let
your power tool run unattended. When it
is not in use (e.g. during a work break),
shut it off and make sure that unauthor-
ized persons do not use it.
Warning!
Be alert – if you get tired, take a break.
Tiredness may result in loss of control.
Working with any power tool can be
strenuous. If you have any condition
that might be aggravated by strenuous
work, check with your doctor before
operating this machine.
Warning!
Prolonged use of a power tool (or other
machines) exposing the operator to
vibrations may produce whitefinger dis-
ease (Raynaud's phenomenon) or
carpal tunnel syndrome.

MS 441
English
4
saw chain sharp. A dull chain will
increase cutting time, and pressing
a dull chain through wood will
increase the vibrations transmitted
to your hands.
–Maintain a firm grip at all times, but
do not squeeze the handles with
constant, excessive pressure. Take
frequent breaks.
All the above-mentioned precautions do
not guarantee that you will not sustain
whitefinger disease or carpal tunnel
syndrome. Therefore, continual and
regular users should closely monitor the
condition of their hands and fingers. If
any of the above symptoms appear,
seek medical advice immediately.
Proper Clothing
Be particularly alert and cautious when
wearing hearing protection because
your ability to hear warnings (shouts,
alarms, etc.) is restricted.
Never operate your power tool unless
wearing goggles or properly fitted
protective glasses with adequate top
and side protection complying with ANSI
Z 87.1 (or your applicable national
standard). To reduce the risk of injury to
your face STIHL recommends that you
also wear a face shield or face screen
over your goggles or protective glasses.
THE POWER TOOL
For illustrations and definitions of the
power tool parts see the chapter on
"Main Parts and Controls."
If this tool is subjected to unusually high
loads for which it was not designed (e.g.
heavy impact or a fall), always check
that it is in good condition before
continuing work. Check in particular that
Warning!
The ignition system of the STIHL unit
produces an electromagnetic field of a
very low intensity. This field may inter-
fere with some pacemakers. To reduce
the risk of serious or fatal injury, persons
with a pacemaker should consult their
physician and the pacemaker manufac-
turer before operating this tool.
Warning!
To reduce the risk of injury, the operator
should wear proper protective apparel.
Clothing must be sturdy
and snug-fitting, but allow
complete freedom of
movement. Wear long
pants made of heavy
material to help protect
your legs from contact
with branches or brush.
To reduce the risk of cut
injuries, wear pants or
chaps that contain pads
of cut retardant material.
Avoid loose-fitting jack-
ets, scarfs, neckties,
jewelry, flared or cuffed
pants, unconfined long
hair or anything that
could become caught on
branches, brush or the
moving parts of the unit.
Secure hair so it is above
shoulder level.
Good footing is very
important. Wear sturdy
boots with nonslip soles.
Steel-toed safety boots
are recommended.
Wear an approved safety
hard hat to reduce the
risk of injury to your head.
Chain saw noise may
damage your hearing.
Wear sound barriers (ear
plugs or ear mufflers) to
help protect your hearing.
Continual and regular
users should have their
hearing checked
regularly.
Always wear gloves
when handling the
machine and the cutting
tool. Heavy-duty, nonslip
gloves improve your grip
and help to protect your
hands.
Warning!
Never modify this power tool in any way.
Only attachments supplied by STIHL or
expressly approved by STIHL for use
with the specific STIHL model are
authorized. Although certain unauthor-
ized attachments are useable with
STIHL power tools, their use may, in
fact, be extremely dangerous.

MS 441
English
5
the fuel system is tight (no leaks) and
that the controls and safety devices are
working properly. Do not continue
operating this machine if it is damaged.
In case of doubt, have it checked by your
STIHL servicing dealer.
THE USE OF THE POWER TOOL
Transporting the Power Tool
It may be carried only in a horizontal
position. Grip the front handle in a
manner that the machine is balanced
horizontally. Keep the hot muffler away
from your body and the cutting
attachment behind you.
Fuel
Your STIHL power tool uses an oil-
gasoline mixture for fuel (see the
chapter on "Fuel" of your instruction
manual).
Fueling Instructions
In order to reduce the risk of burns and
other personal injury from escaping gas
vapor and fumes, remove the fuel filler
cap on your power tool carefully so as to
allow any pressure build-up in the tank
to release slowly. Never remove the fuel
filler cap while the engine is running.
Select bare ground for fueling and move
at least 10 feet (3 m) from the fueling
spot before starting the engine. Wipe off
any spilled fuel before starting your
machine.
Cap with grip
Warning!
To reduce the risk of injury from saw
chain contact, never carry or transport
your power tool with the saw chain mov-
ing. Always engage the chain brake
when taking more than a few steps.
Warning!
Always switch off the engine, and fit the
chain guard (scabbard) over the chain
and guide bar before transporting the
power tool over longer distances. When
transporting it in a vehicle, properly
secure it to prevent turnover, fuel spill-
age and damage to the unit.
001BA115 KN
Warning!
Gasoline is an extremely
flammable fuel. If spilled
and ignited by a spark or
other ignition source, it
can cause fire and seri-
ous burn injury or
property damage. Use extreme caution
when handling gasoline or fuel mix. Do
not smoke or bring any fire or flame near
the fuel or the power tool. Note that
combustible fuel vapor may escape
from the fuel system.
Warning!
Fuel your power tool in well-ventilated
areas, outdoors. Always shut off the
engine and allow it to cool before refu-
eling. Gasoline vapor pressure may
build up inside the fuel tank depending
on the fuel used, the weather conditions
and the tank venting system.
Warning!
Check for fuel leakage while refueling
and during operation. If fuel leakage is
found, do not start or run the engine until
the leak is fixed and any spilled fuel has
been wiped away. Take care not to get
fuel on your clothing. If this happens,
change your clothing immediately. Dif-
ferent models may be equipped with
different fuel caps.
Warning!
In order to reduce the risk of fuel spill-
age and fire from an improperly
tightened fuel cap, correctly position
and tighten the fuel cap in the fuel tank
opening.
To do this with this STIHL
cap, raise the grip on the
top of the cap until it is
upright at a 90° angle.
Insert the cap in the fuel
tank opening with the tri-
angular marks on the grip
of the cap and on the fuel
tank opening lining up.
Using the grip, turn the
cap firmly clockwise as
far as it will go (approx. a
quarter turn).
Produkt Specifikationer
Mærke: | Stihl |
Kategori: | savemaskine |
Model: | MS 441 |
Har du brug for hjælp?
Hvis du har brug for hjælp til Stihl MS 441 stil et spørgsmål nedenfor, og andre brugere vil svare dig
savemaskine Stihl Manualer

16 August 2024

15 August 2024

14 August 2024

7 August 2024

4 August 2024

3 August 2024

3 August 2024

3 August 2024

1 August 2024

1 August 2024
savemaskine Manualer
- savemaskine Scheppach
- savemaskine Bosch
- savemaskine Ozito
- savemaskine Stiga
- savemaskine Metabo
- savemaskine DeWalt
- savemaskine Husqvarna
- savemaskine RYOBI
- savemaskine Silverline
- savemaskine Skil
- savemaskine Mafell
- savemaskine AEG
- savemaskine AL-KO
- savemaskine Zipper
- savemaskine McCulloch
- savemaskine Makita
- savemaskine Worx
- savemaskine Dolmar
- savemaskine MTM
- savemaskine Güde
- savemaskine Jonsered
- savemaskine Vonroc
- savemaskine Hyundai
- savemaskine Milwaukee
- savemaskine Flex
- savemaskine Parkside
- savemaskine Florabest
- savemaskine Black And Decker
- savemaskine FERM
- savemaskine Power Craft
- savemaskine Trotec
- savemaskine Einhell
- savemaskine Proxxon
- savemaskine Stanley
- savemaskine Hikoki
- savemaskine Hilti
- savemaskine Hitachi
- savemaskine Alpha Tools
- savemaskine Bavaria
- savemaskine Greenworks
- savemaskine Kress
- savemaskine Remington
- savemaskine Elu
- savemaskine Festool
- savemaskine Atika
- savemaskine Defort
- savemaskine Echo
- savemaskine Solo
- savemaskine Texas
- savemaskine Max
- savemaskine Tanaka
- savemaskine Luxor
- savemaskine Dremel
- savemaskine Fein
- savemaskine Topcraft
- savemaskine Elektra Beckum
- savemaskine Ford
- savemaskine Bébé Confort
- savemaskine Herkules
- savemaskine Craftsman
- savemaskine Hurricane
- savemaskine Powerplus
- savemaskine Gamma
- savemaskine Westfalia
- savemaskine Genesis
- savemaskine Chicago Pneumatic
- savemaskine Pattfield
- savemaskine Huvema
- savemaskine Fieldmann
- savemaskine Cobra
- savemaskine Spear & Jackson
- savemaskine Porter-Cable
- savemaskine Baumr-AG
- savemaskine Ridgid
- savemaskine Sun Joe
- savemaskine Brennenstuhl
- savemaskine Cotech
- savemaskine Snow Joe
- savemaskine Draper
- savemaskine Hazet
- savemaskine Hobart
- savemaskine Qualcast
- savemaskine Truper
- savemaskine Yard Force
- savemaskine Ideal
- savemaskine Evolution
- savemaskine Lionelo
- savemaskine Meec Tools
- savemaskine Brüder Mannesmann
- savemaskine Ferrex
- savemaskine Oregon Scientific
- savemaskine Troy-Bilt
- savemaskine Bavaria By Einhell
- savemaskine Toolcraft
- savemaskine Fuxtec
- savemaskine Shindaiwa
- savemaskine Proviel
- savemaskine Matrix
- savemaskine RIKON
- savemaskine McKenzie
- savemaskine Holzmann
- savemaskine Yato
- savemaskine Graphite
- savemaskine Cocraft
- savemaskine PRIME3
- savemaskine Wolfcraft
- savemaskine Clarke
- savemaskine Tryton
- savemaskine ACG
- savemaskine Sovereign
- savemaskine Tacklife
- savemaskine Homelite
- savemaskine Challenge
- savemaskine Sterwins
- savemaskine Duro
- savemaskine Varo
- savemaskine IKRA
- savemaskine Masport
- savemaskine Grizzly
- savemaskine Meister Craft
- savemaskine Łucznik
- savemaskine Batavia
- savemaskine Gardenline
- savemaskine Blucave
- savemaskine Max Bahr
- savemaskine Plantiflor
- savemaskine Lux Tools
- savemaskine Kompernass
- savemaskine Goon
- savemaskine BGU
- savemaskine Avantco
- savemaskine Dedra
- savemaskine Kreg
- savemaskine Sthor
- savemaskine Verto
- savemaskine Vulcan
- savemaskine Germania
- savemaskine Anova
- savemaskine FOM
- savemaskine Budget
- savemaskine Ergofix
- savemaskine Challenge Xtreme
- savemaskine Global
- savemaskine King Craft
- savemaskine Maxx
- savemaskine Pro-Cut
- savemaskine Narex
- savemaskine Duro Pro
- savemaskine Toolson
- savemaskine Felisatti
- savemaskine Power Smart
- savemaskine Backyard Pro Butcher Series
- savemaskine Toledo
- savemaskine EFA
- savemaskine Erbauer
- savemaskine Exakt
- savemaskine Gude Pro
- savemaskine MSW
- savemaskine Robust
- savemaskine Ultranatura
- savemaskine FIXIT
- savemaskine Einhell Bavaria
- savemaskine Ergotools Pattfield
- savemaskine MyTool
- savemaskine Morrison
- savemaskine Garland
- savemaskine Donau Elektronik
- savemaskine Rona
- savemaskine Bestgreen
- savemaskine CMI
- savemaskine MacAllister
- savemaskine TAURUS Titanium
- savemaskine Maxbear
Nyeste savemaskine Manualer

15 Oktober 2024

15 Oktober 2024

15 Oktober 2024

14 Oktober 2024

13 Oktober 2024

12 Oktober 2024

11 Oktober 2024

11 Oktober 2024

9 Oktober 2024

6 Oktober 2024