Summit SPR489OSPNR Manual

Summit Ikke kategoriseret SPR489OSPNR

Læs gratis den danske manual til Summit SPR489OSPNR (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 58 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 29.5 anmeldelser. Har du et spørgsmål om Summit SPR489OSPNR, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

Summit Appliance Division · Felix Storch, Inc. · www.summitappliance.com · 718- -3900 · info@summitappliance.com 893

Instructions for Installing a Panel on your PNR Model

PNR Models: SPR489OSPNR/CSS

Your product is designed to accept custom overlay panels on the door frame.

Parts included in PNR kit:

(8) Screws to attach the custom panel

(1) Replacement top hinge

(1) Replacement bottom hinge

(2) Plastic bushing for panel

(2) Washers

Remove the door from the unit

1. Remove the door from its chassis by unscrewing the top and bottom hinges from the cabinet

and door. Save all of the screws for Step 10.

Attach the handle & panel

2. Attach your door handle to the panel using countersunk screws (not included). You can use the

handle that ships with this appliance or substitute your own.

3. Pull out the rubber gasket located around the inner door frame to access the eight screw holes

from the inside of the door.

4. Place your custom panel over the door pane.

5. Using the provided screws, attach the panel by holding it in place from the front and screwing it

onto the door pane from the inside of the door.

6. Reinstall the gasket to its original position.

Reattach the door

7. You will have to drill a hole into the top and bottom of the custom panel in order to connect it to

the new provided hinges. To do this, line the door up in its final position, using the new hinges

as a guide to mark where you will be drilling the holes. Drill a hole through the top and bottom

of the custom panel using a 23 64

⁄” drill bit.

8. Insert the provided bushing into the top and bottom holes of the panel.

9. For models with a lock, drill a 58

⁄” minimum keyhole in the door frame as illustrated above.

10. You can now reinstall the door using the replacement hinges.

Panel/Frame Dimensions:

Exterior ½ H x 18 W : 31 ”¾”

Overlay panel thickness: thick ¾”

Lock diameter (optional use): ⅝”

Note: the stainless steel door trim is 1 thick ¾”

Produkt Specifikationer

Mærke:	Summit
Kategori:	Ikke kategoriseret
Model:	SPR489OSPNR

Har du brug for hjælp?

Hvis du har brug for hjælp til Summit SPR489OSPNR stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Summit Manualer

Summit Accucold FF28LWHMED2 Manual

24 September 2025

Summit MESAMN35 Manual

20 Juni 2025

Summit MESAMN33 Manual

19 Juni 2025

Summit MESAWH33 Manual

19 Juni 2025

Summit OASISMN33 Manual

19 Juni 2025

Summit C60ELGLASS Manual

29 September 2024

Summit CK36EL Manual

28 September 2024

Summit C30ELBK Manual

28 September 2024

Summit C48EL Manual

28 September 2024

Summit CKPUMPKIT Manual

28 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Ikea PORTIS 800.997.90 Manual

31 Oktober 2025

IsoTek V5 Corvus Manual

31 Oktober 2025

Olimpia Splendid Bi2 SLI NAKED Manual

31 Oktober 2025

Golden Lighting Eleanor 3692-A1W Manual

31 Oktober 2025

Metra 82-7303 Manual

31 Oktober 2025

Beaba Steril 'n' Dry Manual

31 Oktober 2025

Moen Nio S75005EV2BLS Manual

31 Oktober 2025

Adventys BWIC 3000 Manual

31 Oktober 2025

Beaba Eazy Sleep Manual

31 Oktober 2025

Iogear GWLRSSKIT4KTX Manual

31 Oktober 2025