Sun Joe 24V-DD-CT-RM Manual

Sun Joe Boremaskine 24V-DD-CT-RM

Læs gratis den danske manual til Sun Joe 24V-DD-CT-RM (20 sider) i kategorien Boremaskine. Denne vejledning er vurderet som hjælpsom af 24 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 12.5 anmeldelser. Har du et spørgsmål om Sun Joe 24V-DD-CT-RM, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/20

®, LLC

A Division of Snow Joe

®, LLC Model 24V-DD-CT-RM Form No. SJ-24V-DD-CT-RM-880E-M-V1

OPERATOR’S MANUAL

CORDLESS DRILL/DRIVER – TOOL ONLY

24-VOLT MAX* | 2-SPEED

®, LLC

A Division of Snow Joe

®, LLC Model 24V-DD-CT-RM Form No. SJ-24V-DD-CT-RM-880E-M-V1

OPERATOR’S MANUAL

CORDLESS DRILL/DRIVER – TOOL ONLY

24-VOLT MAX* | 2-SPEED

IMPORTANT!

Safety Instructions

All Operators Must Read These

Instructions Before Use

Always follow these safety guidelines. Failure to do so may

result in serious bodily injury or death.

General Safety

mWARNING! When using the drill/driver basic safety

precautions should always be followed to reduce the risk of

re, electric shock, and personal injury. These include:

Work Area Safety

1. Keep work area clean and well-lit – Cluttered, dark

areas invite accidents.

2. Keep children, bystanders, and pets away –

All spectators, including pets, should be kept a safe

distance away from the work area.

Do not operate power tools in explosive atmospheres –

Such as in the presence of ammable liquids, gases, or dust.

Power tools create sparks which may ignite the dust or fumes.

Electrical Safety

1 Power tool plugs must match the outlet. Never modify .

the plug in any way. Do not use any adapter plugs with

earthed (grounded) power tools. Unmodied plugs and

matching outlets will reduce risk of electric shock.

2. Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators – There is an increased risk of electric shock

if your body is earthed or grounded.

Do not expose power tools to rain or wet conditions – Water

entering a power tool will increase the risk of electric shock.

Do not abuse the cord. Never use the cord for carrying,

pulling or unplugging the power tool. Keep cord away

from heat, oil, sharp edges or moving parts. Damaged or

entangled cords increase the risk of electric shock.

5. When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of a cord

suitable for outdoor use reduces the risk of electric shock.

6. If operating a power tool in a damp location is

unavoidable, use a residual current device (RCD)

protected supply. Use of an RCD reduces the risk of

electric shock.

Personal Safety

1. Stay alert – Watch what you are doing. Use common

sense. Do not operate the drill/driver when you are tired,

or under the inuence of alcohol or drugs.

2. Dress properly – Do not wear loose clothing or jewelry.

They can get caught in moving parts. Loose clothes,

jewelry, or long hair can be caught in moving parts.

3. Avoid unintentional starting – Do not carry the drill/driver

with your nger on the trigger. Make sure the switch is o

before connecting the drill/driver to power source.

4. Do not overreach – Keep proper footing and balance at

all times. Proper footing and balance enable better control

of the cordless drill/driver in unexpected situations.

5. Use personal protective equipment – Always wear eye

protection. Protective equipment such as dust mask, non-

skid safety shoes, hard hat, or hearing protection used for

appropriate conditions will reduce personal injuries.

6. If devices are provided for the connection of dust

extraction and collection facilities, ensure these are

connected and properly used. – Use of dust collection

can reduce dust-related hazards.

7. Do not use on a ladder or unstable support –

Stable footing on a solid surface enables better control of

the power tool in unexpected situations.

Tool Use and Care

1. Do not force the tool – It will perform better with less

likelihood of personal or mechanical injury if it is used at

the rate for which it was designed.

2. Donotusedrill/driverifswitchdoesnotturnonoro

– The drill/driver that cannot be controlled with the switch

is dangerous and must be repaired.

3. Disconnect the plug from the power source and/or

battery pack from the drill/driver before making any

adjustments, changing accessories, or storing the

drill/driver – Such preventive safety measures reduce risk

of starting the power tool accidentally.

4. Store idle drill/driver out of reach of children or other

untrained persons – Drill/driver is dangerous in the hands

of untrained users.

5. Maintain cordless drill/driver – Check for misalignment

or binding of moving parts, breakage of parts, and any

other condition that may aect the drill/driver's operation.

If damaged, have the drill/driver serviced before using.

Many accidents are caused by poorly maintained tools.

Produkt Specifikationer

Mærke:	Sun Joe
Kategori:	Boremaskine
Model:	24V-DD-CT-RM

Har du brug for hjælp?

Hvis du har brug for hjælp til Sun Joe 24V-DD-CT-RM stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Boremaskine Sun Joe Manualer

Sun Joe 24V-DD-CT-RM Manual

11 December 2023

Sun Joe 24V-DD-LTE Manual

4 November 2022

Boremaskine Manualer

Nyeste Boremaskine Manualer

Smart365 SM-04-01082 Manual

15 Juni 2025

Draper 70257 Manual

8 Juni 2025

Draper 56382 Manual

8 Juni 2025

Draper Storm Force 89523 Manual

8 Juni 2025

Draper Storm Force 56360 Manual

8 Juni 2025

Draper 18937 Manual

7 Juni 2025

Draper D20 55517 Manual

7 Juni 2025

Draper 56404 Manual

7 Juni 2025

Draper Storm Force 89512 Manual

7 Juni 2025

Draper 56369 Manual

7 Juni 2025