Sun Joe 24V-HCS-LTE Manual

Sun Joe savemaskine 24V-HCS-LTE

Læs gratis den danske manual til Sun Joe 24V-HCS-LTE (72 sider) i kategorien savemaskine. Denne vejledning er vurderet som hjælpsom af 18 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 9.5 anmeldelser. Har du et spørgsmål om Sun Joe 24V-HCS-LTE, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/72

®, LLC

A Division of Snow Joe

®, LLC

OPERATOR’S MANUAL

Model 24V-HCS-LTE Form No. SJ-24V-HCS-LTE-880E-MR1

CORDLESS PRUNING SAW

24V MAX* | 2.0 Ah | 5-INCH

IMPORTANT!

Safety Instructions

All Operators Must Read These

Instructions Before Use

Read all safety warnings and all instructions. Failure to follow

the warnings and instructions may result in electric shock, re

and/or serious injury. Save all warnings and instructions for

future reference.

mDANGER! This indicates a hazardous situation, which,

if not followed, will result in serious injury or death.

mWARNING! This indicates a hazardous situation, which,

if not avoided, could result in serious injury or death.

mCAUTION! This indicates a hazardous situation, which,

if not avoided, could result in minor or moderate injury.

Intended Use

This cordless prunning saw was designed and manufactured

for trimming and pruning tree limbs and branches and for

cutting smaller logs up to recommended 4.5 inch

(11.4 cm), not to exceed a max. cut of 5.5 in. (14 cm) in

diameter depending on type of wood. All of the wooden

objects intended to be cut with this pruning saw should be no

thicker than the guide bar's maximum cutting capabilities.

Any other use diering from the above mentioned applications

poses a serious hazard to the user and may damage both the

tool and your personal property. Improper use of the machine

will invalidate the warranty, relieve the manufacturer from all

liabilities. The user will consequently be liable for all and any

damage or injury to himself/herself or others.

General Power Tool Safety

Warnings

mWARNING! Read all safety warnings, instructions,

illustrations and specications provided with this power tool.

Failure to follow all instructions listed below may result in

electric shock, re and/or serious injury. Save all warnings and

instructions for future reference.

Work Area Safety

1. Keep work area clean and well lit – Cluttered or dark

areas invite accidents.

2. Do not operate power tools in explosive atmospheres,

such as in the presence of ammable liquids, gases

or dust – Power tools create sparks which may ignite the

dust or fumes.

3. Keep children and bystanders away while operating a

power tool – Distractions can cause you to lose control.

Electric Safety

1. Power tool plugs must match the outlet. Never modify

the plug in any way. Do not use any adapter plugs with

earthed (grounded) power tools – Unmodied plugs and

matching outlets will reduce risk of electric shock.

2. Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators – There is an increased risk of electric shock

if your body is earthed or grounded.

3. Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool. Keep

cord away from heat, oil, sharp edges or moving parts

– Damaged or entangled cords increase the risk of electric

shock

4. When operating a power tool outdoors, use an

extension cord suitable for outdoor use – Use of a cord

suitable for outdoor use reduces the risk of electric shock.

5. If operating a power tool in a damp location is

unavoidable, use a RESIDUAL CURRENT DEVICE

(RCD) protected supply – Use of an RCD reduces the

risk of electric shock

Personal Safety

1. Stay alert, watch what you are doing and use common

sense when operating a power tool. Do not use a

power tool while you are tired or under the inuence

of drugs, alcohol or medication – A moment of

inattention while operating power tools may result in

serious personal injury.

2. Use personal protective equipment. Always wear

eye protection – Protective equipment such as dust

mask, non-skid safety shoes, hard hat, or hearing

protection used for appropriate conditions will

reduce personal injuries.

3. Prevent unintentional starting. Ensure the switch is

in the o-position before connecting battery pack,

picking up or carrying the tool – Carrying power tools

with your nger on the switch or energising power tools

that have the switch on invites accidents.

4. Remove any adjusting key or wrench before

turning the power tool on – A wrench or a key left

attached to a rotating part of the power tool may result

in personal injury.

5. Do not overreach. Keep proper footing and balance at

all times – This enables better control of the power tool in

unexpected situations.

6. Dress properly. Do not wear loose clothing or jewelry.

Keep your hair, clothing and gloves away from moving

parts – Loose clothes, jewellery or long hair can be

caught in moving parts.

7. If devices are provided for the connection of dust

extraction and collection facilities, ensure these are

connected and properly used – Use of dust collection

can reduce dust-related hazards.

8. Do not let familiarity gained from frequent use of tools

allow you to become complacent and ignore tool

safety principles. A careless action can cause severe

injury within a fraction of a second.

Power Tool Use and Care

1. Do not force the power tool. Use the correct power

tool for your application – The correct power tool will

do the job better and safer at the rate for which it was

designed.

2. Do not use the power tool if the switch does not turn

it on and o – Any power tool that cannot be controlled

with the switch is dangerous and must be repaired.

3. Disconnect the battery pack from the power

tool before making any adjustments, changing

accessories, or storing power tools – Such

preventive safety measures reduce the risk of starting

the power tool accidentally.

4. Store idle power tools out of the reach of children and

do not allow persons unfamiliar with the power tool or

these instructions to operate the power tool – Power

tools are dangerous in the hands of untrained users.

5. Maintain power tools. Check for misalignment or

binding of moving parts, breakage of parts and any

other condition that may aect the power tool’s

operation. If damaged, have the power tool repaired

before use – Many accidents are caused by poorly

maintained power tools.

6. Keep cutting tools sharp and clean – Properly

maintained cutting tools with sharp cutting edges are less

likely to bind and are easier to control.

7. Use the power tool, accessories etc. in accordance

with these instructions, taking into account the

working conditions and the work to be performed –

Use of the power tool for operations dierent from those

intended could result in a hazardous situation.

8. Keep handles and grasping surfaces dry, clean and

free from oil and grease. Slippery handles and grasping

surfaces do not allow for safe handling and control of the

tool in unexpected situations.

Battery Tool Use and Care

mWARNING! Read all safety warnings and instructions.

Failure to follow the warnings and instructions may result in

electric shock, re and/or serious injury.

1. Recharge only with the charger specied by the

manufacturer. A charger that is suitable for one type of

battery pack may create a risk of re when used with

another battery pack.

2. Use appliances only with specically designated battery

packs. Use of any other battery packs may create a risk of

injury and re.

3. When the battery pack is not in use, keep it away from

other metal objects, like paper clips, coins, keys, nails,

screws or other small metal objects, that can make a

connection from one terminal to another. Shorting the

battery terminals together may cause burns or a re.

4. Under abusive conditions, liquid may be ejected from

the battery; avoid contact. If contact accidentally occurs,

ush with water. If liquid contacts eyes, additionally seek

medical help. Liquid ejected from the battery may cause

irritation or burns.

5. Do not use a battery pack or appliance that is damaged

or modied. Damaged or modied batteries may exhibit

unpredictable behavior resulting in re, explosion or risk of

injury.

6. Do not expose a battery pack or appliance to re or

excessive temperature. Exposure to re or temperature

above 104°F(40.5°C) may cause explosion.

7. Follow all charging instructions and do not charge the

battery pack or appliance outside of the temperature

range specied in the instructions. Charging improperly

or at temperatures outside of the specied range may

damage the battery and increase the risk of re.

8. Do not modify or attempt to repair the appliance or the

battery pack (as applicable) except as indicated in the

instructions for use and care.

Service

1. Have your power tool serviced by a qualied repair

person using only identical replacement parts. This will

ensure that the safety of the power tool is maintained.

2. Never service damaged battery packs. Service

of battery packs should only be performed by the

manufacturer or authorized service providers.

Produkt Specifikationer

Mærke:	Sun Joe
Kategori:	savemaskine
Model:	24V-HCS-LTE

Har du brug for hjælp?

Hvis du har brug for hjælp til Sun Joe 24V-HCS-LTE stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

savemaskine Sun Joe Manualer

Sun Joe SWJ805E-RM Manual

13 September 2024

Sun Joe iON8PS2 Manual

22 August 2024

Sun Joe 24V-HCSWP-CT Manual

19 August 2024

Sun Joe SWJ803E-CMO Manual

16 August 2024

Sun Joe SWJ803E Manual

15 August 2024

Sun Joe SWJ699E-RM Manual

5 August 2024

Sun Joe 24V-PS10-CT-RM Manual

4 August 2024

Sun Joe SWJ802E-M Manual

3 August 2024

Sun Joe BDL-A0201 Manual

3 August 2024

Sun Joe 24V-PS8-LTE Manual

3 August 2024

savemaskine Manualer

Nyeste savemaskine Manualer

Einhell GE-CS 18 Li Manual

15 Oktober 2024

15 Oktober 2024

15 Oktober 2024

14 Oktober 2024

13 Oktober 2024

Einhell TC-AP 650 E Manual

12 Oktober 2024

Einhell TE-SM 36/210 Li Solo Manual

11 Oktober 2024

Einhell BT-SM 2534 Manual

11 Oktober 2024

Hitachi C 7MFA(LA) Manual

9 Oktober 2024

Ozito ECS-406A Manual

6 Oktober 2024