Sun Joe 24V-PS8-LTE Manual

Sun Joe savemaskine 24V-PS8-LTE

Læs gratis den danske manual til Sun Joe 24V-PS8-LTE (72 sider) i kategorien savemaskine. Denne vejledning er vurderet som hjælpsom af 63 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 32 anmeldelser. Har du et spørgsmål om Sun Joe 24V-PS8-LTE, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/72

®, LLC

A Division of Snow Joe

®, LLC Model 24V-PS8-LTE Form No. SJ-24V-PS8-LTE-880E-MR4

OPERATOR’S MANUAL

CORDLESS POLE CHAIN SAW

24V MAX* | 2.0 Ah | 8-INCH | MULTI-ANGLE

IMPORTANT!

Safety Instructions

All Operators Must Read These

Instructions Before Use

Always follow these safety guidelines. Failure to do so may

result in serious bodily injury or death.

General Safety

mWARNING! This appliance is not intended for use

by children or by unassisted, unsupervised persons whose

physical, sensory or mental capabilities prevent them from

using it safely. Children should be supervised to ensure that

they do not play with the appliance.

Before starting up your machine, please check it carefully for

any defects. If you nd any, do not start up your machine.

Contact your authorized Snow Joe® + Sun Joe® dealer or

call the Snow Joe® + Sun Joe® customer service center at

1-866-SNOWJOE (1-866-766-9563).

mWARNING! When using the power tool, basic safety

precautions should always be followed to reduce the risk of

re, electric shock, and personal injury. These include:

1. Keep work area clean and well-lit – Cluttered, dark

areas invite accidents.

2. Avoid dangerous environments – Do not use the power

tool in rain, in damp or wet locations, or in bad weather,

especially when there is a risk of lighting. This decreases

the risk of being struck by lighting. Do not operate the

power tool in gaseous or explosive atmospheres or use

the power tool near ammable or combustible liquids.

Motors in these tools normally spark, and the sparks

might ignite fumes.

3. Know your product – Know how to start and stop the

machine. Be thoroughly familiar with the controls.

4. Keep children, bystanders, and pets away –

All spectators, including pets, should be kept a safe

distance away from the work area.

5. Dress properly – Do not wear loose clothing or jewelry.

They can get caught in moving parts. Protective rubber

gloves and non-slip footwear are recommended when

working outdoors.

6. mCAUTION! – Exercise caution to avoid slipping or

falling. Wear protective footwear that will protect your feet

and improve your footing on slippery surfaces.

7. Stay alert – Watch what you are doing. Use common

sense. Do not operate the power tool when you are tired,

or under the inuence of alcohol or drugs.

8. Do not overreach – Keep proper footing and balance at

all times.

9. Prevent unintentional starting – Ensure the switch is in

the o-position before connecting to battery pack, picking

up or carrying the appliance. Carrying the appliance with

your nger on the switch or energizing appliance that have

the switch on invites accidents.

This warning is not applicable for batteries that NOTE:

cannot be disconnected from the appliance in normal use.

10.

Use the right appliance – Do not use the power tool for

any applications other than those for which it was intended.

11. Blades are sharp – Don't grasp the exposed cutting

blades or cutting edges when picking up or holding the

power tool.

12. Use two hands – Hold the telescoping pole and handle

with both hands to avoid loss of control.

13. Remove the battery – Remove the battery from the

power tool when it is not in use, before servicing it, when

changing accessories, and when performing any other

maintenance task.

14.

Use safety glasses – Also use safety footwear, snug-tting

clothing, protective gloves, hearing and head protection.

15. Use head protection – Always use head protection when

operating the power tool overhead. Falling debris can

result in serious personal injury.

16. Do not force the tool – It will perform better with less

likelihood of personal or mechanical injury if it is used at

the rate for which it was designed.

17. Store indoors – When not in use, the power tool should

be stored indoors in a dry and high or locked-up place out

of the reach of children.

18. Check for damaged parts – Before further use of the

appliance, all guards and parts should be carefully

checked to determine that it will operate properly and

perform its intended function. Check for alignment of

moving parts, binding of moving parts, breakage of parts,

mounting, and any other condition that may aect its

operation. A guard or other part that is damaged should

be properly repaired or replaced. Contact the Snow Joe®

+ Sun Joe® customer service center at 1-866-SNOWJOE

(1-866-766-9563) for assistance.

19. Maintain the power tool with care – Keep the cutting

edges sharp and clean for optimal performance and to

reduce the risk of injury. Keep the handles dry, clean,

and free from oil and grease. Follow the additional

recommendations described in the maintenance section

of this manual.

20. Do not use the power tool if the switch does not turn it on

and o. Any power tool that cannot be controlled with the

switch is dangerous and must be repaired.

21. Keep all parts of the body away from the cutting blades or

chain. Do not remove cut material or hold material to be cut

when blades are moving. Make sure the switch is o when

clearing jammed material. The blades or chain will continue

moving for a while after the tool is turned o. A moment

of inattention while operating the power tool may result in

serious personal injury.

22. Carry the power tool by the handle with the cutting blade

or chain stopped. When transporting or storing the power

tool, always keep the blades or chain bar covered.

Proper handling of the pole chain saw will reduce possible

personal injury from the cutting blades or chain.

23. Hold the product by insulated gripping surfaces only,

because the cutting blade or chain may contact hidden

wiring. Cutting blades or chain contacting a “live” wire

may make exposed metal parts of the product “live” and

could give the operator an electric shock.

24. The unit has not been designed to provide protection

from electric shock in the event of contact with overhead

electric lines. Never use the power tool near any electrical

power lines. Contact with or use near power lines may

cause serious injury or electric shock resulting in death.

Maintain a minimum clearance of 50 ft (15 m) from all

power lines.

mWARNING! Before inspecting, cleaning, or servicing

the machine, remove the battery and wait for all moving

parts to stop. Failure to follow these instructions can result in

serious personal injury or property damage.

mWARNING! Do not use this appliance without reading

this instruction manual.

mWARNING! Do not use the appliance within range of

persons unless they are wearing protective clothing.

mWARNING! Do not operate the cordless power tool in

a tree, on a ladder, or on a scaold. Using the tool under such

circumstances is extremely dangerous.

mWARNING! Do not let familiarity with this type of tool

prevent you from taking all necessary precautions. Remember

that a careless fraction of a second is sucient to inict

serious injury.

mWARNING! The cordless pole chain saw must be fully

assembled before operation! Do not use the tool that is only

partly assembled or assembled with damaged parts!

mWARNING! Starting, stopping, and restarting an

electric motor repeatedly within a few seconds can generate

a great deal of heat and damage the motor. To protect the life

of your cordless power tool, always wait at least ve seconds

after stopping before restarting the unit.

mWARNING! Electrical Shock Hazard – Before starting

up your machine, please check it carefully for any defects.

If you nd any, do not start up your machine and contact your

distributor.

NOTE: Take care of small parts that are removed during

assembly or when making adjustments. Keep them secure to

avoid loss.

Please contact an authorized Snow Joe® + Sun Joe® dealer

or call the Snow Joe® + Sun Joe® customer service center

at 1-866-SNOWJOE (1-866-766-9563) for all maintenance

or operations not foreseen in this manual. Any operation

performed in an unauthorized service center or by unqualied

personnel will completely invalidate the warranty.

mWARNING! For your safety and that of others:

• Correct maintenance is essential to maintain the original

eciency and safety of the machine over time.

• Keep all nuts, bolts, and screws tight to be sure the

equipment is in safe working condition.

• Never use the machine with worn or damaged parts.

Damaged parts are to be replaced and never repaired.

mWARNING! Always wear protective gloves during

maintenance operations.

mWARNING! Use only original manufacturer’s

replacement parts, accessories and attachments. Failure to do

so can cause possible injury and poor performance.

To order genuine replacement parts or accessories for the

Sun Joe® iON+ cordless pole chain saw, please visit sunjoe.

com or contact the Snow Joe® + Sun Joe® customer service

center at 1-866-SNOWJOE (1-866-766-9563).

Cleaning the Tool

mWARNING! Never let any liquid get inside the motor

housing and NEVER immerse any part of the housing in liquid.

1. Stop the motor and remove the battery.

2. Clean dirt and debris from the body of the tool, using a

damp cloth with a mild detergent.

Do not use any strong detergents on the plastic NOTE:

housing or the handle, as they can be damaged by certain

aromatic oils such as pine and lemon, and by solvents

such as kerosene.

Produkt Specifikationer

Mærke:	Sun Joe
Kategori:	savemaskine
Model:	24V-PS8-LTE

Har du brug for hjælp?

Hvis du har brug for hjælp til Sun Joe 24V-PS8-LTE stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

savemaskine Sun Joe Manualer

Sun Joe SWJ805E-RM Manual

13 September 2024

Sun Joe iON8PS2 Manual

22 August 2024

Sun Joe 24V-HCSWP-CT Manual

19 August 2024

Sun Joe SWJ803E-CMO Manual

16 August 2024

Sun Joe SWJ803E Manual

15 August 2024

Sun Joe SWJ699E-RM Manual

5 August 2024

Sun Joe 24V-PS10-CT-RM Manual

4 August 2024

Sun Joe SWJ802E-M Manual

3 August 2024

Sun Joe BDL-A0201 Manual

3 August 2024

Sun Joe 24V-PS8-LTE Manual

3 August 2024

savemaskine Manualer

Nyeste savemaskine Manualer

Einhell GE-CS 18 Li Manual

15 Oktober 2024

15 Oktober 2024

15 Oktober 2024

14 Oktober 2024

13 Oktober 2024

Einhell TC-AP 650 E Manual

12 Oktober 2024

Einhell TE-SM 36/210 Li Solo Manual

11 Oktober 2024

Einhell BT-SM 2534 Manual

11 Oktober 2024

Hitachi C 7MFA(LA) Manual

9 Oktober 2024

Ozito ECS-406A Manual

6 Oktober 2024