Sun Joe 24V-HCS-LTE-RM Manual

Sun Joe savemaskine 24V-HCS-LTE-RM

Læs gratis den danske manual til Sun Joe 24V-HCS-LTE-RM (24 sider) i kategorien savemaskine. Denne vejledning er vurderet som hjælpsom af 12 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 6.5 anmeldelser. Har du et spørgsmål om Sun Joe 24V-HCS-LTE-RM, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/24

A Division of Snow Joe, LLC

OPERATOR’S MANUAL

Model 24V-HCS-LTE-RM Form No. SJ-24V-HCS-LTE-RM-880E-M-V1

CORDLESS PRUNING SAW

24V MAX* | 2.0 Ah | 5-INCH

A Division of Snow Joe, LLC

OPERATOR’S MANUAL

Model 24V-HCS-LTE-RM Form No. SJ-24V-HCS-LTE-RM-880E-M-V1

CORDLESS PRUNING SAW

24V MAX* | 2.0 Ah | 5-INCH

IMPORTANT!

Safety Instructions

All Operators Must Read These

Instructions Before Use

Read all safety warnings and all instructions. Failure to follow

the warnings and instructions may result in electric shock, re

and/or serious injury. Save all warnings and instructions for

future reference.

mDANGER! This indicates a hazardous situation, which,

if not followed, will result in serious injury or death.

mWARNING! This indicates a hazardous situation, which,

if not avoided, could result in serious injury or death.

mCAUTION! This indicates a hazardous situation, which,

if not avoided, could result in minor or moderate injury.

Intended Use

This cordless prunning saw was designed and manufactured

for trimming and pruning tree limbs and branches and for

cutting smaller logs up to recommended 4.5 inch

(11.4 cm), not to exceed a max. cut of 5.5 in. (14 cm) in

diameter depending on type of wood. All of the wooden

objects intended to be cut with this pruning saw should be no

thicker than the guide bar's maximum cutting capabilities.

Any other use diering from the above mentioned applications

poses a serious hazard to the user and may damage both the

tool and your personal property. Improper use of the machine

will invalidate the warranty, relieve the manufacturer from all

liabilities. The user will consequently be liable for all and any

damage or injury to himself/herself or others.

General Power Tool Safety

Warnings

mWARNING! Read all safety warnings, instructions,

illustrations and specications provided with this power tool.

Failure to follow all instructions listed below may result in

electric shock, re and/or serious injury. Save all warnings and

instructions for future reference.

Work Area Safety

1. Keep work area clean and well lit – Cluttered or dark

areas invite accidents.

2. Do not operate power tools in explosive atmospheres,

such as in the presence of ammable liquids, gases

or dust – Power tools create sparks which may ignite the

dust or fumes.

3. Keep children and bystanders away while operating a

power tool – Distractions can cause you to lose control.

Electric Safety

1. Power tool plugs must match the outlet. Never modify

the plug in any way. Do not use any adapter plugs with

earthed (grounded) power tools – Unmodied plugs and

matching outlets will reduce risk of electric shock.

2. Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators – There is an increased risk of electric shock

if your body is earthed or grounded.

3. Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool. Keep

cord away from heat, oil, sharp edges or moving parts

– Damaged or entangled cords increase the risk of electric

shock

4. When operating a power tool outdoors, use an

extension cord suitable for outdoor use – Use of a cord

suitable for outdoor use reduces the risk of electric shock.

5. If operating a power tool in a damp location is

unavoidable, use a RESIDUAL CURRENT DEVICE

(RCD) protected supply – Use of an RCD reduces the

risk of electric shock

Personal Safety

1. Stay alert, watch what you are doing and use common

sense when operating a power tool. Do not use a

power tool while you are tired or under the inuence

of drugs, alcohol or medication – A moment of

inattention while operating power tools may result in

serious personal injury.

2. Use personal protective equipment. Always wear

eye protection – Protective equipment such as dust

mask, non-skid safety shoes, hard hat, or hearing

protection used for appropriate conditions will

reduce personal injuries.

3. Prevent unintentional starting. Ensure the switch is

in the o-position before connecting battery pack,

Produkt Specifikationer

Mærke:	Sun Joe
Kategori:	savemaskine
Model:	24V-HCS-LTE-RM

Har du brug for hjælp?

Hvis du har brug for hjælp til Sun Joe 24V-HCS-LTE-RM stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

savemaskine Sun Joe Manualer

Sun Joe SWJ805E-RM Manual

13 September 2024

Sun Joe iON8PS2 Manual

22 August 2024

Sun Joe 24V-HCSWP-CT Manual

19 August 2024

Sun Joe SWJ803E-CMO Manual

16 August 2024

Sun Joe SWJ803E Manual

15 August 2024

Sun Joe SWJ699E-RM Manual

5 August 2024

Sun Joe 24V-PS10-CT-RM Manual

4 August 2024

Sun Joe SWJ802E-M Manual

3 August 2024

Sun Joe BDL-A0201 Manual

3 August 2024

Sun Joe 24V-PS8-LTE Manual

3 August 2024

savemaskine Manualer

Nyeste savemaskine Manualer

Einhell GE-CS 18 Li Manual

15 Oktober 2024

15 Oktober 2024

15 Oktober 2024

14 Oktober 2024

13 Oktober 2024

Einhell TC-AP 650 E Manual

12 Oktober 2024

Einhell TE-SM 36/210 Li Solo Manual

11 Oktober 2024

Einhell BT-SM 2534 Manual

11 Oktober 2024

Hitachi C 7MFA(LA) Manual

9 Oktober 2024

Ozito ECS-406A Manual

6 Oktober 2024