Sun Joe 24V-PHT17-CT Manual

Sun Joe Hækkeklipper 24V-PHT17-CT

Læs gratis den danske manual til Sun Joe 24V-PHT17-CT (20 sider) i kategorien Hækkeklipper. Denne vejledning er vurderet som hjælpsom af 35 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 18 anmeldelser. Har du et spørgsmål om Sun Joe 24V-PHT17-CT, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/20
© 2020 by Snow Joe
®, LLC
All rights reserved. Original instructions. SAVE THESE INSTRUCTIONS
1
A Division of Snow Joe
®, LLC
OPERATOR’S MANUAL
Model 24V-PHT17-CT Form No. SJ-24V-PHT17-CT-880E-M
R
CORDLESS POLE HEDGE TRIMMER
– TOOL ONLY
24 VOLT MAX* | MULTI-ANGLE | 17-INCH
IMPORTANT!
Safety Instructions
All Operators Must Read These
Instructions Before Use
Always follow these safety guidelines. Failure to do so may
result in serious bodily injury or death.
General Power Tool Safety
Warnings
mWARNING! Read all safety warnings and all
instructions. Failure to follow the warnings and instructions
may result in electric shock, re and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.
mDANGER! This indicates a hazardous situation, which,
if not followed, will result in serious injury or death.
mWARNING! This indicates a hazardous situation, which,
if not followed, could result in serious injury or death.
mCAUTION! This indicates a hazardous situation, which,
if not followed, could result in minor or moderate injury.
Work Area Safety
1. Keep work area clean and well lit – Cluttered or dark
areas invite accidents.
2. Do not operate power tools in explosive atmospheres,
such as in the presence of ammable liquids, gases
or dust – Power tools create sparks which may ignite the
dust or fumes.
3. Keep children and bystanders away while operating a
power tool – Distractions can cause you to lose control.
Electrical Safety
1. Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodied plugs and
matching outlets will reduce risk of electric shock.
2. Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators – There is an increased risk of electric shock
if your body is earthed or grounded.
3. Do not expose power tools to rain or wet conditions
– Water entering a power tool will increase the risk of
electric shock.
4. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the risk of electric
shock.
5. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
Personal Safety
1. Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a
power tool while you are tired or under the inuence
of drugs, alcohol or medication – A moment of
inattention while operating power tools may result in
serious personal injury.
2. Always wear Use safety equipment.
eye protection – Safety equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection
used for appropriate conditions will reduce personal
injuries.
3. Avoid accidental starting. Ensure the switch is in the
o-position before plugging in – Carrying power tools
with your nger on the switch or plugging in power tools
that have the switch on invites accidents.
4. Remove any adjusting key or wrench before
turning the power tool on – A wrench or a key left
attached to a rotating part of the power tool may result
in personal injury.
5. Do not overreach. Keep proper footing and balance at
all times – This enables better control of the power tool in
unexpected situations.
6. Dress properly. Do not wear loose clothing or jewelry.
Keep your hair, clothing and gloves away from moving
parts – Loose clothes, jewelry or long hair can be caught
in moving parts.
7. If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used – Use of dust collection
can reduce dust-related hazards.
2
Power Tool Use + Care
1. Do not force the power tool. Use the correct power
tool for your application – The correct power tool will
do the job better and safer at the rate for which it was
designed.
2. Do not use the power tool if the switch does not turn
it on and o – Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
3. Disconnect the battery pack from the power
tool before making any adjustments, changing
accessories, or storing power tools – Such
preventive safety measures reduce the risk of starting
the power tool accidentally.
4. Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool – Power
tools are dangerous in the hands of untrained users.
5. Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may aect the power tool’s
operation. If damaged, have the power tool repaired
before use – Many accidents are caused by poorly
maintained power tools.
6. Keep cutting tools sharp and clean – Properly
maintained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
7. Use the power tool, accessories and tool bits etc., in
accordance with these instructions and in the manner
intended for the particular type of power tool, taking
into account the working conditions and the work
to be performed – Use of the power tool for operations
dierent from those intended could result in a hazardous
situation.
Service
Have your power tool serviced by a qualied repair person
using only identical replacement parts. This will ensure that
the safety of the power tool is maintained.
Additional Safety Rules for Pole
Hedge Trimmer
1. Remove any blade that has been damaged. Always make
sure that the blade is installed correctly and securely
fastened before each use. Failure to do so can cause
serious injury.
2. Hold the pole hedge trimmer by insulated gripping
surfaces only, because the cutter blade may contact
hidden wiring. Cutter blades contacting a "live" wire may
electrify exposed metal parts of the power tool and could
give the operator an electric shock.
3. Maintain a rm grip on both handle and pole while cutting
with the blade. Keep the blade away from body.
4. Hold pole hedge trimmer properly, e.g., with both hands.
Loss of control can cause personal injury.
5. Check the hedge for foreign objects before operation,
e.g., center fences. Take care that the cutting device does
not come in contact with wire or other metal objects.
6. Service on the product must be performed by qualied
repair personnel only. Service or maintenance performed
by unqualied personnel could result in injury to the user
or damage to the product.
7. Keep all parts of the body away from the cutting blade.
Do not remove cut material or hold material to be cut
when blades are moving. Make sure the switch is o and
the battery is removed when clearing jammed material.
A moment of inattention while operating the pole hedge
trimmer may result in serious personal injury.
8. Carry the pole hedge trimmer by the handle with the
cutting blade stopped. When transporting or storing
the pole hedge trimmer always keep the blade covered.
Proper handling of the pole hedge trimmer will reduce
possible personal injury from the cutter blades.
9. Do not use the pole hedge trimmer if the switch does not
turn it on and o. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
10. Use the pole hedge trimmer and accessories in
accordance with these instructions, taking into account
the working conditions and the work to be performed.
Use of the power tool for operations dierent from
intended use could lead to a hazardous situation.
11. Do not overreach and keep the balance at all times.
Always be sure of the footing on slopes. Walk when
operating the power tool, never run.
12. Do not touch moving hazardous parts before the battery
pack is removed and the moving hazardous parts have
come to a complete stop.
13. Always wear eye and ear protection. Wear protective mask
if necessary. Dress properly, do not wear loose clothing
or jewelry that could become caught in moving parts of
the unit. Safe, sturdy, nonskid footwear should always be
worn. Long hair should be tied back.
14. Do not use the machine in bad weather conditions
especially when there is a risk of lightning.
15. Inspect the area to be cut and remove any foreign objects
that will inuence your cutting. If the foreign objects
can not be removed, e.g. wire fences, please mark and
remember it to avoid touching them during cutting.
mDANGER! Keep hands away from blade. Contact with
blade will result in serious personal injury.
Training
1. Read the instructions carefully. Be familiar with the
controls and the proper use of the product.
2. Never allow people unfamiliar with these instructions or
children to use the product. Local regulations can restrict
the age of the operator.
3. Keep in mind that the operator or user is responsible for
accidents or hazards occurring to other people or their
property.

Produkt Specifikationer

Mærke: Sun Joe
Kategori: Hækkeklipper
Model: 24V-PHT17-CT

Har du brug for hjælp?

Hvis du har brug for hjælp til Sun Joe 24V-PHT17-CT stil et spørgsmål nedenfor, og andre brugere vil svare dig


Hækkeklipper Sun Joe Manualer

Sun Joe

Sun Joe 24V-HT16-LTE Manual

31 December 2025
Sun Joe

Sun Joe HJ15HTE Manual

31 December 2025
Sun Joe

Sun Joe HJ22HTE-MAX Manual

8 September 2024
Sun Joe

Sun Joe SJH901E Manual

25 August 2024
Sun Joe

Sun Joe SJH904E-RM Manual

14 August 2024
Sun Joe

Sun Joe 20VIONLT-PHT17-RM Manual

12 August 2024
Sun Joe

Sun Joe 24V-HT22-LTE Manual

9 August 2024
Sun Joe

Sun Joe 24V-PHT17-CT-RM Manual

5 August 2024
Sun Joe

Sun Joe HJ604C-GRY-RM Manual

2 August 2024
Sun Joe

Sun Joe SJH902E-RM Manual

31 Juli 2024

Hækkeklipper Manualer

Nyeste Hækkeklipper Manualer

Tanaka

Tanaka TCH 24EAP Manual

13 September 2025
Tanaka

Tanaka THT-210SB Manual

13 September 2025
Tanaka

Tanaka TCH 22EA2 Manual

13 September 2025
Solo

Solo HTA 4245 Manual

11 September 2025
EGO

EGO Power+ HT6500E Manual

10 September 2025
Cocraft

Cocraft MT15 Manual

9 September 2025
Brandson

Brandson 303503 Manual

6 September 2025
Powerworks

Powerworks P60PHT Manual

3 September 2025
Könner & Söhnen

Könner & Söhnen KS HT-20V Manual

2 September 2025
Kress

Kress KC241.9 Manual

1 September 2025