Sun Joe 24V-X2-24HT-CT-RM Manual

Sun Joe Hækkeklipper 24V-X2-24HT-CT-RM

Læs gratis den danske manual til Sun Joe 24V-X2-24HT-CT-RM (20 sider) i kategorien Hækkeklipper. Denne vejledning er vurderet som hjælpsom af 16 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 8.5 anmeldelser. Har du et spørgsmål om Sun Joe 24V-X2-24HT-CT-RM, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/20
© 2021 by Snow Joe®, LLC
All rights reserved. Original instructions. SAVE THESE INSTRUCTIONS
A Division of Snow Joe®, LLC
R
OPERATOR’S MANUAL
Model 24V-X2-24HT-CT-RM Form No. SJ-24V-X2-24HT-CT-RM-880E-MR1-V2
CORDLESS HEDGE TRIMMER – TOOL ONLY
48 V MAX* | 24-INCH
© 2021 by Snow Joe
®, LLC
All rights reserved. Original instructions. SAVE THESE INSTRUCTIONS
1
A Division of Snow Joe
®, LLC
R
OPERATOR’S MANUAL
Model 24V-X2-24HT-CT-RM Form No. SJ-24V-X2-24HT-CT-RM-880E-MR1-V2
CORDLESS HEDGE TRIMMER – TOOL ONLY
48 V MAX* | 24-INCH
IMPORTANT!
Safety Instructions
All Operators Must Read These
Instructions Before Use
Always follow these safety guidelines. Failure to do so may
result in serious bodily injury or death.
General Power Tool Safety
Warnings
m WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and instructions
may result in electric shock, re and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.
mDANGER! This indicates a hazardous situation, which,
if not followed, will result in serious injury or death.
mWARNING! This indicates a hazardous situation, which,
if not followed, could result in serious injury or death.
mCAUTION! This indicates a hazardous situation, which,
if not followed, could result in minor or moderate injury.
Work Area Safety
1. Keep work area clean and well lit – Cluttered or dark
areas invite accidents.
2. Do not operate power tools in explosive atmospheres,
such as in the presence of ammable liquids, gases
or dust – Power tools create sparks which may ignite the
dust or fumes.
3. Keep children and bystanders away while operating a
power tool – Distractions can cause you to lose control.
Electrical Safety
1. Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodied plugs and
matching outlets will reduce risk of electric shock.
2. Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators – There is an increased risk of electric shock
if your body is earthed or grounded.
3. Do not expose power tools to rain or wet conditions
– Water entering a power tool will increase the risk of
electric shock.
4. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the risk of electric
shock.
5. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
6. If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of
electric shock.
Personal Safety
1. Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a
power tool while you are tired or under the inuence
of drugs, alcohol or medication – A moment of
inattention while operating power tools may result in
serious personal injury.
2. Use personal protective equipment. Always wear eye
protection – Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection
used for appropriate conditions will reduce personal
injuries.
3. Prevent unintentional starting. Ensure the switch is in
the o-position before connecting to power source
and/or battery packs, picking up or carrying the tool.
– Carrying power tools with your nger on the switch or
energizing power tools that have the switch on invites
accidents.
4. Do not overreach. Keep proper footing and balance at
all times – This enables better control of the power tool in
unexpected situations.
5. Dress properly. Do not wear loose clothing or jewelry.
Keep your hair, clothing and gloves away from moving
parts – Loose clothes, jewelry or long hair can be caught
in moving parts.
6. Remove any adjusting key or wrench before turning
the power tool on – A wrench or a key left attached to
a rotating part of the power tool may result in personal
injury.

Produkt Specifikationer

Mærke: Sun Joe
Kategori: Hækkeklipper
Model: 24V-X2-24HT-CT-RM

Har du brug for hjælp?

Hvis du har brug for hjælp til Sun Joe 24V-X2-24HT-CT-RM stil et spørgsmål nedenfor, og andre brugere vil svare dig


Hækkeklipper Sun Joe Manualer

Sun Joe

Sun Joe 24V-HT16-LTE Manual

31 December 2025
Sun Joe

Sun Joe HJ15HTE Manual

31 December 2025
Sun Joe

Sun Joe HJ22HTE-MAX Manual

8 September 2024
Sun Joe

Sun Joe SJH901E Manual

25 August 2024
Sun Joe

Sun Joe SJH904E-RM Manual

14 August 2024
Sun Joe

Sun Joe 20VIONLT-PHT17-RM Manual

12 August 2024
Sun Joe

Sun Joe 24V-HT22-LTE Manual

9 August 2024
Sun Joe

Sun Joe 24V-PHT17-CT-RM Manual

5 August 2024
Sun Joe

Sun Joe HJ604C-GRY-RM Manual

2 August 2024
Sun Joe

Sun Joe SJH902E-RM Manual

31 Juli 2024

Hækkeklipper Manualer

Nyeste Hækkeklipper Manualer

NEO Tools

NEO Tools 04-627 Manual

10 Juni 2025
Lawn Star

Lawn Star LSH 552 Manual

31 Maj 2025
Anova

Anova CG2360 Manual

3 April 2025
Makita

Makita BUM166 Manual

29 Marts 2025
Einhell

Einhell GC-PH 2155 Manual

12 Januar 2025
Fieldmann

Fieldmann FZN 1001-A Manual

12 Januar 2025
Echo

Echo HC-1500 Manual

7 Januar 2025
Turbo-Silent

Turbo-Silent HS 5550 Manual

5 Januar 2025
DeWalt

DeWalt DCHT821 Manual

2 Januar 2025
Hurricane

Hurricane HHS 580 Manual

29 December 2024