Sun Joe 24V-X2-CS16-CT Manual

Sun Joe savemaskine 24V-X2-CS16-CT

Læs gratis den danske manual til Sun Joe 24V-X2-CS16-CT (28 sider) i kategorien savemaskine. Denne vejledning er vurderet som hjælpsom af 40 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 20.5 anmeldelser. Har du et spørgsmål om Sun Joe 24V-X2-CS16-CT, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/28

®, LLC

A Division of Snow Joe

®, LLC

OPERATOR’S MANUAL

Model 24V-X2-CS16-CT Form No. SJ-24V-X2-CS16-CT-880E-M

RCORDLESS CHAIN SAW – CORE TOOL

48-VOLT MAX* | 16-INCH

IMPORTANT!

Safety Instructions

All Operators Must Read These

Instructions Before Use

Read all safety warnings and all instructions. Failure to follow

the warnings and instructions may result in electric shock, re

and/or serious injury. Save all warnings and instructions for

future reference.

mDANGER! This indicates a hazardous situation, which,

if not followed, will result in serious injury or death.

mWARNING! This indicates a hazardous situation, which,

if not avoided, could result in serious injury or death.

mCAUTION! This indicates a hazardous situation, which,

if not avoided, could result in minor or moderate injury.

Intended Use

This cordless chain saw was designed and manufactured for

trimming and pruning tree limbs and branches and for cutting

smaller logs up to recommended 14.5 inch (36.8 cm), not to

exceed a max. cut of 15.5 in. (39.4 cm) in diameter depending

on type of wood. All of the wooden objects intended to be cut

with this chain saw should be no thicker than the guide bar's

maximum cutting capabilities.

Improper Use

Any other use diering from the above mentioned applications

poses a serious hazard to the user and may damage both the

tool and your personal property. Examples of improper use

include, but are not limited to:

• Trimming hedges;

• Carving;

• Sectioning pallets, crates, and various packing materials;

• Sectioning furniture or other materials with nails, screws, or

other metal components;

• Butchering meat;

• Using the machine to lift, move, or split objects;

• Using the machine while fastened to xed supports.

Improper use of the machine will invalidate the warranty,

relieve the manufacturer from all liabilities. The user will

consequently be liable for all and any damage or injury to

himself/herself or others.

General Safety

mWARNING! When using cordless yard tools, basic

safety precautions should always be followed to reduce the

risk of re, electric shock, and personal injury, including

the following:

Work Area Safety

1. Keep work area clean and well lit – Cluttered or dark

areas invite accidents.

2. Do not operate power tools in explosive atmospheres,

such as in the presence of ammable liquids, gases

or dust – Power tools create sparks which may ignite the

dust or fumes.

3. Keep children and bystanders away while operating a

power tool – Distractions can cause you to lose control.

Electric Safety

1. Power tool plugs must match the outlet. Never modify

the plug in any way. Do not use any adapter plugs with

earthed (grounded) power tools. Unmodied plugs and

matching outlets will reduce risk of electric shock.

2. Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators – There is an increased risk of electric shock

if your body is earthed or grounded.

3. Do not expose power tools to rain or wet conditions

– Water entering a power tool will increase the risk of

electric shock.

4. Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool. Keep

cord away from heat, oil, sharp edges or moving parts.

Damaged or entangled cords increase the risk of electric

shock.

5. When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of a cord

suitable for outdoor use reduces the risk of electric shock.

6. If operating a power tool in a damp location is

unavoidable, use a residual current device (RCD)

protected supply. Use of an RCD reduces the risk of

electric shock.

Personal Safety

1. Stay alert, watch what you are doing and use common

sense when operating a power tool. Do not use a

power tool while you are tired or under the inuence

of drugs, alcohol or medication – A moment of

inattention while operating power tools may result in

serious personal injury.

2. Use personal protective equipment. Always wear

eye protection – Protective equipment such as dust

mask, non-skid safety shoes, hard hat, or hearing

protection used for appropriate conditions will

reduce personal injuries.

3. Prevent unintentional starting. Ensure the switch is

in the o-position before connecting battery packs,

picking up or carrying the tool – Carrying power tools

with your nger on the switch or energising power tools

that have the switch on invites accidents.

4. Remove any adjusting key or wrench before

turning the power tool on – A wrench or a key left

attached to a rotating part of the power tool may result

in personal injury.

5. Do not overreach. Keep proper footing and balance at

all times – This enables better control of the power tool in

unexpected situations.

6. Dress properly. Do not wear loose clothing or

jewellery. Keep your hair, clothing and gloves away

from moving parts – Loose clothes, jewellery or long hair

can be caught in moving parts.

7. If devices are provided for the connection of dust

extraction and collection facilities, ensure these are

connected and properly used – Use of dust collection

can reduce dust-related hazards.

Power Tool Use and Care

1. Do not force the power tool. Use the correct

power tool for your application – The correct power

tool will do the job better and safer at the rate for which

it was designed.

2. Do not use the power tool if the switch does not turn

it on and o – Any power tool that cannot be controlled

with the switch is dangerous and must be repaired.

3. Disconnect the battery packs from the power

tool before making any adjustments, changing

accessories, or storing power tools – Such

preventive safety measures reduce the risk of starting

the power tool accidentally.

4. Store idle power tools out of the reach of children and

do not allow persons unfamiliar with the power tool or

these instructions to operate the power tool – Power

tools are dangerous in the hands of untrained users.

5. Maintain power tools. Check for misalignment or

binding of moving parts, breakage of parts and any

other condition that may aect the power tool’s

operation. If damaged, have the power tool repaired

before use – Many accidents are caused by poorly

maintained power tools.

6. Keep cutting tools sharp and clean – Properly

maintained cutting tools with sharp cutting edges are less

likely to bind and are easier to control.

7. Use the power tool, accessories etc. in accordance

with these instructions, taking into account the

working conditions and the work to be performed –

Use of the power tool for operations dierent from those

intended could result in a hazardous situation.

Battery tool use and care

1. Recharge only with the charger specied by the

manufacturer – A charger that is suitable for one type

of battery pack may create a risk of re when used with

another battery pack.

2. Use power tools only with specically designated

battery packs – Use of any other battery packs may

create a risk of injury and re.

3. When battery packs are not in use, keep them away

from other metal objects, like paper clips, coins, keys,

nails, screws or other small metal objects, that can

make a connection from one terminal to another –

Shorting the battery terminals together may cause burns

or a re.

4. Under abusive conditions, liquid may be ejected from

the battery; avoid contact. If contact accidentally

occurs, ush with water. If liquid contacts eyes,

additionally seek medical help – Liquid ejected from the

battery may cause irritation or burns.

Service

Have your power tool serviced by a qualied repair person

using only identical replacement parts. This will ensure that

the safety of the power tool is maintained

Chain Saw Safety Warnings

• Keep guards in place. Protective guards should be

checked periodically to ensure they are properly tted and

in correct working order.

• Do not grasp the exposed cutting blade or cutting edges

when picking up or holding the saw. Be sure to encase the

cutting bar in its protective sheath when not in use.

• Keep all parts of the body away from the saw chain

when the chain saw is operating. Before you start the

chain saw, make sure the saw chain is not contacting

anything. A moment of inattention while operating the

chain saw may cause entanglement of your clothing or

body with the saw chain.

• Always hold the chain saw with your right hand on

the rear handle and your left hand on the front handle.

Holding the chain saw with a reversed hand conguration

increases the risk of personal injury and should never be

done.

Produkt Specifikationer

Mærke:	Sun Joe
Kategori:	savemaskine
Model:	24V-X2-CS16-CT

Har du brug for hjælp?

Hvis du har brug for hjælp til Sun Joe 24V-X2-CS16-CT stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

savemaskine Sun Joe Manualer

Sun Joe SWJ805E-RM Manual

13 September 2024

Sun Joe iON8PS2 Manual

22 August 2024

Sun Joe 24V-HCSWP-CT Manual

19 August 2024

Sun Joe SWJ803E-CMO Manual

16 August 2024

Sun Joe SWJ803E Manual

15 August 2024

Sun Joe SWJ699E-RM Manual

5 August 2024

Sun Joe 24V-PS10-CT-RM Manual

4 August 2024

Sun Joe SWJ802E-M Manual

3 August 2024

Sun Joe BDL-A0201 Manual

3 August 2024

Sun Joe 24V-PS8-LTE Manual

3 August 2024

savemaskine Manualer

Nyeste savemaskine Manualer

Einhell GE-CS 18 Li Manual

15 Oktober 2024

15 Oktober 2024

15 Oktober 2024

14 Oktober 2024

13 Oktober 2024

Einhell TC-AP 650 E Manual

12 Oktober 2024

Einhell TE-SM 36/210 Li Solo Manual

11 Oktober 2024

Einhell BT-SM 2534 Manual

11 Oktober 2024

Hitachi C 7MFA(LA) Manual

9 Oktober 2024

Ozito ECS-406A Manual

6 Oktober 2024