Sun Joe GTS4002C Manual

Sun Joe Plæneklipper GTS4002C

Læs gratis den danske manual til Sun Joe GTS4002C (107 sider) i kategorien Plæneklipper. Denne vejledning er vurderet som hjælpsom af 9 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 5 anmeldelser. Har du et spørgsmål om Sun Joe GTS4002C, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/107
© 2021 by Snow Joe
®, LLC
All rights reserved. Original instructions. SAVE THESE INSTRUCTIONS
EN
A Division of Snow Joe
®, LLC Model GTS4002C Form No. SJ-GTS4002C-880E-MR7
R
OPERATOR’S MANUAL
CORDLESS LAWN + GARDEN
MULTI-TOOL SYSTEM
24-VOLT MAX* | POLE HEDGE TRIMMER | POLE CHAIN SAW | POLE GRASS TRIMMER
IMPORTANT!
Safety Instructions
All Operators Must Read These
Instructions Before Use
Always follow these safety guidelines. Failure to do so may
result in serious bodily injury or death.
General Safety
mWARNING! This appliance is not intended for use
by children or by unassisted, unsupervised persons whose
physical, sensory or mental capabilities prevent them from
using it safely. Children should be supervised to ensure that
they do not play with the appliance.
Before starting up your machine, please check it carefully for
any defects. If you nd any, do not start up your machine.
Contact your authorized Snow Joe® + Sun Joe® dealer or
call the Snow Joe® + Sun Joe® customer service center at
1-866-SNOWJOE (1-866-766-9563).
mWARNING! When using the power tool, basic safety
precautions should always be followed to reduce the risk of
re, electric shock, and personal injury. These include:
1. Keep work area clean and well-lit – Cluttered, dark
areas invite accidents.
2. Avoid dangerous environments – Do not use the power
tool in rain, in damp or wet locations, or in bad weather,
especially when there is a risk of lighting. This decreases
the risk of being struck by lighting. Do not operate the
power tool in gaseous or explosive atmospheres or use
the power tool near ammable or combustible liquids.
Motors in these tools normally spark, and the sparks
might ignite fumes.
3. Know your product – Know how to start and stop the
machine. Be thoroughly familiar with the controls.
4. Keep children, bystanders, and pets away –
All spectators, including pets, should be kept a safe
distance away from the work area.
5. Dress properly – Do not wear loose clothing or jewelry.
They can get caught in moving parts. Protective rubber
gloves and non-slip footwear are recommended when
working outdoors.
6. mCAUTION! – Exercise caution to avoid slipping or
falling. Wear protective footwear that will protect your feet
and improve your footing on slippery surfaces.
7. Stay alert – Watch what you are doing. Use common
sense. Do not operate the power tool when you are tired,
or under the inuence of alcohol or drugs.
8. Do not overreach – Keep proper footing and balance
at all times.
9. Avoid unintentional starting – Do not carry the power
tool with your nger on the trigger. Make sure the switch
is o before inserting the battery.
10. Use the right appliance – Do not use the power tool
for any applications other than those for which it was
intended.
11. Blades are sharp – Don't grasp the exposed cutting
blades or cutting edges when picking up or holding the
power tool.
12. Use two hands – Hold the telescoping pole and handle
with both hands to avoid loss of control.
13. Remove the battery – Remove the battery from the
power tool when it is not in use, before servicing it,
when changing accessories, and when performing any
other maintenance task.
14. Use safety glasses – Also use safety footwear,
snug-tting clothing, protective gloves, hearing and
head protection.
15. Use head protection – Always use head protection when
operating the power tool overhead. Falling debris can
result in serious personal injury.
16. Do not force the tool – It will perform better with less
likelihood of personal or mechanical injury if it is used at
the rate for which it was designed.
17. Store indoors – When not in use, the power tool should
be stored indoors in a dry and high or locked-up place out
of the reach of children.
18. Check for damaged parts – Before further use of the
appliance, all guards and parts should be carefully
checked to determine that it will operate properly and
perform its intended function. Check for alignment of
moving parts, binding of moving parts, breakage of parts,
mounting, and any other condition that may aect its
operation. A guard or other part that is damaged should
be properly repaired or replaced. Contact the Snow Joe®
+ Sun Joe® customer service center at 1-866-SNOWJOE
(1-866-766-9563) for assistance.
1
2
19. Maintain the power tool with care – Keep the cutting
edges sharp and clean for optimal performance and to
reduce the risk of injury. Keep the handles dry, clean,
and free from oil and grease. Follow the additional
recommendations described in the maintenance section
of this manual.
20. Do not use the power tool if the switch does not turn it on
and o. Any power tool that cannot be controlled with the
switch is dangerous and must be repaired.
21. Keep all parts of the body away from the cutting blades/
chain. Do not remove cut material or hold material to be
cut when blades/chain are moving. Make sure the switch
is o when clearing jammed material. The blades/chain will
continue moving for a while after the tool is turned o.
A moment of inattention while operating the power tool
may result in serious personal injury.
22. Carry the power tool by the handle with the cutting blade/
chain stopped. When transporting or storing the power
tool, always keep the blades/chain covered.
Proper handling of the garden tool will reduce
possible personal injury from the cutting blades.
23. Hold the product by insulated gripping surfaces only,
because the cutting blades/chain may contact hidden
wiring. Cutting blades/chain contacting a “live” wire may
make exposed metal parts of the product “live”and could
give the operator an electric shock.
24. The unit has not been designed to provide protection
from electric shock in the event of contact with overhead
electric lines. Never use the power tool near any electrical
power lines. Contact with or use near power lines may
cause serious injury or electric shock resulting in death.
Maintain a minimum clearance of 50 ft (15 m) from all
power lines.
mWARNING! Before inspecting, cleaning, or servicing
the machine, remove the battery and wait for all moving parts
to stop. Failure to follow these instructions can result in serious
personal injury or property damage.
mWARNING! Do not use this appliance without reading
this instruction manual.
mWARNING! Do not use the appliance within range of
persons unless they are wearing protective clothing.
mWARNING! Do not operate the cordless power tool in
a tree, on a ladder, or on a scaold. Using the tool under such
circumstances is extremely dangerous.
mWARNING! Do not let familiarity with this type of tool
prevent you from taking all necessary precautions. Remember
that a careless fraction of a second is sucient to inict
serious injury.
mWARNING! The multi-tool system must be fully
assembled before operation! Do not use the tool that is only
partly assembled or assembled with damaged parts!
mWARNING! Starting, stopping, and restarting an
electric motor repeatedly within a few seconds can generate
a great deal of heat and damage the motor. To protect the life
of your cordless power tool, always wait at least ve seconds
after stopping before restarting the unit.
mWARNING! Electrical Shock Hazard – Before starting
up your machine, please check it carefully for any defects.
If you nd any, do not start up your machine and contact your
distributor.
NOTE: Take care of small parts that are removed during
assembly or when making adjustments. Keep them secure
to avoid loss.
Please contact an authorized Snow Joe® + Sun Joe® dealer
or call the Snow Joe® + Sun Joe® customer service center
at 1-866-SNOWJOE (1-866-766-9563) for all maintenance
or operations not foreseen in this manual. Any operation
performed in an unauthorized service center or by unqualied
personnel will completely invalidate the warranty.
mWARNING! For your safety and that of others:
• Correct maintenance is essential to maintain the original
eciency and safety of the machine over time.
• Keep all nuts, bolts, and screws tight to be sure the
equipment is in safe working condition.
• Never use the machine with worn or damaged parts.
Damaged parts are to be replaced and never repaired.
mWARNING! Always wear protective gloves during
maintenance operations.
mWARNING! Use only original manufacturer’s
replacement parts, accessories and attachments. Failure to
do so can cause possible injury and poor performance.
To order genuine replacement parts or accessories for the
Sun Joe® GTS4002C cordless lawn + garden multi-tool
system, please visit sunjoe.com or contact the Snow Joe® +
Sun Joe® customer service center at 1-866-SNOWJOE
(1-866-766-9563).
Cleaning the Tool
mWARNING! Never let any liquid get inside the motor
housing and NEVER immerse any part of the housing in liquid.
1. Stop the motor and remove the battery.
2. Clean dirt and debris from the body of the tool, using a
damp cloth with a mild detergent.
Do not use any strong detergents on the plastic NOTE:
housing or the handle, as they can be damaged by certain
aromatic oils such as pine and lemon, and by solvents
such as kerosene.

Produkt Specifikationer

Mærke: Sun Joe
Kategori: Plæneklipper
Model: GTS4002C

Har du brug for hjælp?

Hvis du har brug for hjælp til Sun Joe GTS4002C stil et spørgsmål nedenfor, og andre brugere vil svare dig


Plæneklipper Sun Joe Manualer

Sun Joe

Sun Joe 24V-MTE-LTE Manual

31 Maj 2025
Sun Joe

Sun Joe 24V-X2-21LM-RM Manual

13 Januar 2025
Sun Joe

Sun Joe AJ798E-RM Manual

2 September 2024
Sun Joe

Sun Joe BDL-A0046 Manual

11 August 2024
Sun Joe

Sun Joe ION16LM-HYB-RM Manual

8 August 2024
Sun Joe

Sun Joe MJ402E Manual

7 August 2024
Sun Joe

Sun Joe AJ799E-RM Manual

6 August 2024
Sun Joe

Sun Joe MJ401E-PRO Manual

4 August 2024
Sun Joe

Sun Joe 24V-LAWN-BDL Manual

3 August 2024
Sun Joe

Sun Joe AJ805E-RM Manual

2 August 2024

Plæneklipper Manualer

Nyeste Plæneklipper Manualer

Dedra

Dedra DED6998X Manual

15 Juni 2025
Mountfield

Mountfield SP536ES Manual

15 Juni 2025
Mountfield

Mountfield HP474 Manual

15 Juni 2025
Stiga

Stiga Villa 14 HST Manual

14 Juni 2025
Mountfield

Mountfield Empress 16SP Manual

14 Juni 2025
Atco

Atco Clipper 20 Manual

14 Juni 2025
Mountfield

Mountfield SP184 Manual

13 Juni 2025
Mountfield

Mountfield SP414 Manual

13 Juni 2025
Stiga

Stiga SBC 653 KD Manual

13 Juni 2025
Mountfield

Mountfield HP45 Manual

13 Juni 2025