Sun Joe HJ604C Manual

Sun Joe Hækkeklipper HJ604C

Læs gratis den danske manual til Sun Joe HJ604C (44 sider) i kategorien Hækkeklipper. Denne vejledning er vurderet som hjælpsom af 41 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 21 anmeldelser. Har du et spørgsmål om Sun Joe HJ604C, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/44

®, LLC

A Division of Snow Joe

®, LLC Model HJ604C Form No. SJ-HJ604C-880E-MR9

OPERATOR’S MANUAL

CORDLESS GRASS SHEAR

+ HEDGE TRIMMER

7.2V LITHIUM-ION

IMPORTANT!

Safety Instructions

All Operators Must Read These

Instructions Before Use

Always follow these safety guidelines. Failure to do so may

result in serious bodily injury or death.

General Safety WARNINGS!

Notice the personal safety alert symbol used in this manual m

to draw your attention to a WARNING given along with the

particular operating instruction. This means that the operation

requires special ATTENTION CAUTION AWARENESS, , and .

When using this power tool, basic safety precautions, including

the following, should always be followed to reduce the risk of

re, electric shock, personal injury and material damage.

mWARNING! This unit can be dangerous! Careless or

improper use can cause serious injury.

mWARNING! The rotating blades can cut you. Keep

hands and feet away from the blades and the cutting area.

Retain this manual for future reference and reread it at the start

of each trimming season.

mWARNING! This battery-operated power tool must be

recharged only with the specic charging unit for the battery. A

charging unit that may be suitable for one type of battery may

create a risk of re when used with another battery type.

• Avoid accidental starting.

• When the tool is not in use, keep it away from other metal

objects.

• Before operating the tool, read the entire manual carefully

and make sure you know how to switch the tool OFF in an

emergency.

Work Area Safety

1. Keep work area clean and well lit. Cluttered and dark

areas invite accidents.

2. Do not operate power tools in explosive atmospheres,

such as in the presence of ammable liquids, gases or

dust. Power tools create sparks which may ignite the dust

or fumes.

3. Keep bystanders and children away. All bystanders,

including children and pets, should be kept a safe

distance away from the work area.

Electrical Safety

1. If the battery charger cable is damaged, please call the

Snow Joe® + Sun Joe® customer service center at

1-866-SNOWJOE (1-866-766-9563).

2. If charging the power tool in a damp location is

unavoidable, use a residual current device (RCD)

protected power supply. The using of an RCD reduces the

risk of electric shock.

3. Power tool plugs must match the outlet. Never modify

the plug in any way. Do not use any earthed (grounded)

power tools or battery chargers. Unmodied plugs and

matching outlets will reduce risk of electric shock.

4. Avoid body contact with earthed or grounded surfaces

such as pipes, radiators, ranges and refrigerators.

There is an increased risk of electric shock if your body is

earthed or grounded.

5. Do not expose power tools to rain or wet conditions.

Water entering a power tool will increase the risk of

electric shock.

6. Do not abuse the charging cord. Never use the cord

for carrying, pulling or unplugging the power tool. Keep

cord away from heat, oil, sharp edges or moving parts.

Damaged or entangled cords increase the risk of electric

shock.

7. Battery charger is for indoor use only. Only charge this

battery-powered tool indoors.

Personal Safety

1. Stay alert. Watch what you are doing and use common

sense when operating a power tool. Do not use the

power tool while you are tired or under the inuence of

drugs, alcohol or medication. A moment of inattention

while operating power tool may result in serious personal

injury.

2. Use personal protective equipment. Always wear eye

protection. Protective equipment such as safety glasses,

a dusk mask, non-skid safety shoes, a hard hat, and

hearing protection, when used for appropriate conditions,

will reduce the possibility of personal injuries.

3. Avoid unintentional starting. Ensure the switch is in the

OFF position before connecting to the power source/

battery charger, or before picking up or carrying the tool.

Carrying power tools with your nger on the switch or

charging power tools with the switch ON can lead to

accidents.

4. Remove any adjusting key or wrench before starting

the power tool. A wrench or a key left attached to a

rotating part of the power tool may result in personal

injury.

5. Do not overreach. Keep proper footing and balance at

all times. This enables better control of the power tool in

unexpected situations.

6. Dress properly. Do not wear loose clothing or jewelry.

Dangling articles such as these can become caught in

moving parts. Using work gloves and substantial footwear

is recommended when working outdoors. Wear

a protective hair covering to contain long hair.

7. Use dust-reducing equipment (e.g. dust masks) when

available. Using these devices can greatly reduce

dust-related hazards.

Power Tool Use and Care

1. Do not force the appliance. It will do the job better with

less likelihood of injury if it is used at the rate for which it

was designed.

2. Do not use the power tool if the switch does not turn

it on and o. Any power tool that cannot be controlled by

the switch is dangerous and must be repaired.

3. Disconnect the battery pack from the power tool

before making any adjustments, changing accessories

or storing the power tool. Such preventative safety

measures reduce the risk of starting the power tool

accidentally.

4. Store idle appliances indoors. When not in use,

appliances should be stored indoors in a dry and high or

locked-up place out of the reach of children.

5. Maintain appliance with care. Check for misalignment or

binding of moving parts, breakage of parts and any other

condition that may aect the power tool's operation. If

damaged, have the power tool repaired before use. Many

accidents are caused by poorly maintained power tools.

6. Properly Keep cutting blades sharp and clean.

maintained cutting blades with sharp edges are less likely

to bind and are easier to control.

7. Use the power tool and accessories in accordance

with these instructions and in the manner intended

for the particular use of the power tool, taking into

account the working conditions and the work to be

performed. Using the power tool for operations dierent

from those intended could result in a hazardous situation.

8. Keep all parts of the body away from the cutter blade.

Do not remove cut material or hold material to be cut

when blades are moving. Make sure the switch is o

when clearing jammed material. A moment of inattention

while operating the product may result in serious personal

injury.

9. Carry the product by the handle with the cutter blade

stopped. When transporting or storing the product always

t the cutting device cover. Proper handling of the product

will reduce possible personal injury from the cutter blades.

10. Hold the power tool by insulated gripping surfaces

only, because the cutter blade may contact hidden wiring.

Cutter blades contacting a "live" wire may make exposed

metal parts of the power tool "live" and could give the

operator an electric shock.

11. Check the hedge for foreign objects before operation,

e.g. wire fences. Take care that the cutting device does

not come into contact with wire or other metal objects.

12. Hold the product properly, e.g. with both hands if two

handles are provided. Loss of control can cause personal

injury.

Service

1. If your power tool requires service, contact an

authorized Snow Joe® + Sun Joe® dealer or call the

Snow Joe® + Sun Joe® customer service center at

1-866-SNOWJOE (1-866-766-9563). Only identical

replacement parts should be utilized for repairs. This will

ensure that the safety of the power tool is maintained.

2. If the battery charger cable is damaged, it must be

immediately replaced to avoid a hazard. Contact

the Snow Joe® + Sun Joe® customer service center at

1-866-SNOWJOE (1-866-766-9563) for assistance.

Battery Safety Warnings

This manual contains important safety and operating

instructions for your battery and charger.

1. Before using the charging, thoroughly read all instructions

and cautionary markings on the charger, the telescoping

pole, and the cordless grass shear + hedge trimmer.

mWARNING! If the grass shear + hedge trimmer housing

is cracked or damaged, do not insert the charging adaptor into

the power tool or plug the power tool into the mains outlet.

There is a danger of electric shock or electrocution.

2. This charger is ONLY intended to charge this rechargeable

battery. Any other use poses a risk of re, electric shock

or electrocution.

3. Do not place any object on top of the charger or place

the charger on a soft surface that may result in excessive

internal heat. Keep the charger away from any heat

source.

4. To reduce the risk of damaging the electric plug and

cord, pull the plug, not the cord, when disconnecting the

charger from the electric outlet.

5. Make sure the battery charging cable is located in a safe

place so that it will not be stepped on, tripped over or

otherwise subjected to damage or stress.

6. An extension cord should not be used unless absolutely

necessary. Using an improper extension cord poses a risk

of re, electric shock or electrocution.

Produkt Specifikationer

Mærke:	Sun Joe
Kategori:	Hækkeklipper
Model:	HJ604C

Har du brug for hjælp?

Hvis du har brug for hjælp til Sun Joe HJ604C stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Hækkeklipper Sun Joe Manualer

Sun Joe 24V-HT16-LTE Manual

31 December 2025

Sun Joe HJ15HTE Manual

31 December 2025

Sun Joe HJ22HTE-MAX Manual

8 September 2024

Sun Joe SJH901E Manual

25 August 2024

Sun Joe SJH904E-RM Manual

14 August 2024

Sun Joe 20VIONLT-PHT17-RM Manual

12 August 2024

Sun Joe 24V-HT22-LTE Manual

9 August 2024

Sun Joe 24V-PHT17-CT-RM Manual

5 August 2024

Sun Joe HJ604C-GRY-RM Manual

2 August 2024

Sun Joe SJH902E-RM Manual

31 Juli 2024

Hækkeklipper Manualer

Nyeste Hækkeklipper Manualer

NEO Tools 04-627 Manual

10 Juni 2025

Lawn Star LSH 552 Manual

31 Maj 2025

Anova CG2360 Manual

3 April 2025

Makita BUM166 Manual

29 Marts 2025

Einhell GC-PH 2155 Manual

12 Januar 2025

Fieldmann FZN 1001-A Manual

12 Januar 2025

Echo HC-1500 Manual

7 Januar 2025

Turbo-Silent HS 5550 Manual

5 Januar 2025

DeWalt DCHT821 Manual

2 Januar 2025

Hurricane HHS 580 Manual

29 December 2024