Sun Joe ION100V-10PS-CT-RM Manual

Sun Joe savemaskine ION100V-10PS-CT-RM

Læs gratis den danske manual til Sun Joe ION100V-10PS-CT-RM (25 sider) i kategorien savemaskine. Denne vejledning er vurderet som hjælpsom af 25 personer og har en gennemsnitlig bedømmelse på 3.6 stjerner ud af 13 anmeldelser. Har du et spørgsmål om Sun Joe ION100V-10PS-CT-RM, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/25

A Division of Snow Joe®, LLC

OPERATOR’S MANUAL

Model iON100V-10PS-CT-RM Form No. SJ-iON100V-10PS-CT-880E-MR1-V2

CORDLESS POLE CHAIN SAW

– CORE TOOL

100-VOLT MAX* | 10-INCH

®, LLC

A Division of Snow Joe®, LLC

OPERATOR’S MANUAL

Model iON100V-10PS-CT-RM Form No. SJ-iON100V-10PS-CT-880E-MR1-V2

CORDLESS POLE CHAIN SAW

– CORE TOOL

100-VOLT MAX* | 10-INCH

IMPORTANT!

Safety Instructions

All Operators Must Read These

Instructions Before Use

Always follow these safety guidelines. Failure to do so may

result in serious bodily injury or death.

mDANGER! This indicates a hazardous situation, which,

if not followed, will result in serious injury or death.

mWARNING! This indicates a hazardous situation, which,

if not followed, could result in serious injury or death.

mCAUTION! This indicates a hazardous situation, which,

if not followed, could result in minor or moderate injury.

General Safety

mWARNING! When using cordless yard tools, basic safety

precautions should always be followed to reduce the risk of re,

electric shock and personal injury, including the following:

1. Keep guards in place – Protective guards should be

checked periodically to ensure they are properly tted and

in correct working order.

2. Keep work area clean and well-lit – Clear work area of

branches and limbs after each cutting session. Cluttered

areas invite accidents.

3. Do not use in dangerous environments – Do not use

power tools in damp or wet locations.

4. Do not use the pole chain saw in the rain.

5. Keep bystanders and children away – All bystanders,

including children and pets, should be kept a safe

distance away from the work area.

6. Do not force the tool – It will do the job eectively and

safely if it is used at the rate for which it was designed.

7. Use the right tool – Do not force the tool or any

attachment on the tool to do a job for which they were

not designed.

8. Wear proper apparel – Do not wear loose articles of

clothing or jewelry since such items may get caught

in moving parts. Use of heavy-duty rubber gloves,

substantial non-skid footware and close-tting clothing is

recommended when working outdoors with power tools.

9. Wear protective hair coverings to contain long hair.

10. Always wear safety glasses and ear defenders to

provide eye and ear protection – Everyday eyeglasses

only have impact resistant lenses and do not provide the

same protection as safety glasses.

11. Wear face or dust masks – If the cutting operation is

dusty, the use of a face or dust mask specially designed

to lter out microscopic particles is recommended.

12. Do not overreach – Keep proper footing and balance

at all times.

13. Maintain tools with care – Keep tools sharp and clean

for best and safest performance. Follow instructions for

lubricating and changing accessories.

14. Disconnect tool – Turn o the power switch and remove

the battery when it is not in use, before servicing, when

transporting or when changing the chain or

other accessories.

15. Reduce the risk of unintentional starting – Make sure

the safety button and the On/O switch are in the OFF

position before inserting the battery in the unit. Do not

carry the pole chain saw with the safety button and the

On/O switch engaged.

16. Use recommended accessories – Consult the owner’s

manual for recommended accessories. The use of

improper accessories may cause risk of injury.

17. Check for damaged parts – Before each use, repair or

replace any guard or part that is damaged. In addition,

check for alignment of moving parts, binding of moving

parts, breakage of parts and any other conditions that

may aect the tool's operation.

18. Never leave tool unattended while it is running – Turn

the power OFF by removing the battery from the unit.

Do not leave the saw until the cutting bar comes to a

complete stop.

19. Avoid unintentional starting – Do not carry the pole

chain saw with your nger on the switch.

20. Do not grasp the exposed cutting blade or cutting

edges when picking up or holding the saw – Be sure

to encase the cutting bar in its protective sheath when

not in use.

21. Stay alert – Watch what you are doing. Use common

sense. Do not operate the pole chain saw when you

are tired.

22. Store idle tool indoors – When not in use, appliances

should be stored indoors in a dry and high or locked-up

place out of the reach of children.

Produkt Specifikationer

Mærke:	Sun Joe
Kategori:	savemaskine
Model:	ION100V-10PS-CT-RM

Har du brug for hjælp?

Hvis du har brug for hjælp til Sun Joe ION100V-10PS-CT-RM stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

savemaskine Sun Joe Manualer

Sun Joe SWJ805E-RM Manual

13 September 2024

Sun Joe iON8PS2 Manual

22 August 2024

Sun Joe 24V-HCSWP-CT Manual

19 August 2024

Sun Joe SWJ803E-CMO Manual

16 August 2024

Sun Joe SWJ803E Manual

15 August 2024

Sun Joe SWJ699E-RM Manual

5 August 2024

Sun Joe 24V-PS10-CT-RM Manual

4 August 2024

Sun Joe SWJ802E-M Manual

3 August 2024

Sun Joe BDL-A0201 Manual

3 August 2024

Sun Joe 24V-PS8-LTE Manual

3 August 2024

savemaskine Manualer

Nyeste savemaskine Manualer

Einhell GE-CS 18 Li Manual

15 Oktober 2024

15 Oktober 2024

15 Oktober 2024

14 Oktober 2024

13 Oktober 2024

Einhell TC-AP 650 E Manual

12 Oktober 2024

Einhell TE-SM 36/210 Li Solo Manual

11 Oktober 2024

Einhell BT-SM 2534 Manual

11 Oktober 2024

Hitachi C 7MFA(LA) Manual

9 Oktober 2024

Ozito ECS-406A Manual

6 Oktober 2024