Supermicro X10SBA-L Manual

Supermicro Bundkort X10SBA-L

Læs gratis den danske manual til Supermicro X10SBA-L (99 sider) i kategorien Bundkort. Denne vejledning er vurderet som hjælpsom af 12 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 6.5 anmeldelser. Har du et spørgsmål om Supermicro X10SBA-L, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/99
X10SBA
X10SBA-L
X10SBA-V
USER’S MANUAL
Revision 1.0c
The information in this user’s manual has been carefully reviewed and is believed to be accurate.
The vendor assumes no responsibility for any inaccuracies that may be contained in this document,
makes no commitment to update or to keep current the information in this manual, or to notify any
person or organization of the updates. Please Note: For the most up-to-date version of this
manual, please see our web site at www.supermicro.com.
Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product
described in this manual at any time and without notice. This product, including software and docu-
mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.
Any use or reproduction of this product is not allowed, except as expressly permitted by the terms
of said license.
IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,
SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO
USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY
HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE
COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH
HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between manufacturer and customer shall be governed by the laws of Santa
Clara County in the State of California, USA. The State of California, County of Santa Clara shall
be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all
claims will not exceed the price paid for the hardware product.
FCC Statement: This equipment has been tested and found to comply with the limits for a class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance with the instruc-
tions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interfer-
ence to radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver
is connected.
• Consult the authorized dealer or an experienced radio/TV technician for help.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warn-
ing applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate
Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”
WARNING: Handling of lead solder materials used in this
product may expose you to lead, a chemical known to the
State of California to cause birth defects and other repro-
ductive harm.
Manual Revision 1.0c
Release Date: December 4, 2019
Unless you request and receive written permission from Super Micro Computer, Inc., you may not
copy any part of this document.
Information in this document is subject to change without notice. Other products and companies
referred to herein are trademarks or registered trademarks of their respective companies or mark
holders.
Copyright © 2019 by Super Micro Computer, Inc.
All rights reserved.
Printed in the United States of America

Produkt Specifikationer

Mærke: Supermicro
Kategori: Bundkort
Model: X10SBA-L

Har du brug for hjælp?

Hvis du har brug for hjælp til Supermicro X10SBA-L stil et spørgsmål nedenfor, og andre brugere vil svare dig


Bundkort Supermicro Manualer

Supermicro

Supermicro M11SDV-4CT-LN4F Manual

11 September 2025
Supermicro

Supermicro X13SAW-TLN4F Manual

11 September 2025
Supermicro

Supermicro X13SCL-F Manual

10 September 2025
Supermicro

Supermicro X11SDC-4C Manual

10 September 2025
Supermicro

Supermicro X13SRN-H Manual

10 September 2025
Supermicro

Supermicro X11SWN-L Manual

10 September 2025
Supermicro

Supermicro H12SSW-iN Manual

10 September 2025
Supermicro

Supermicro X13DEG-PVC Manual

10 September 2025
Supermicro

Supermicro M11SDV-4C-LN4F Manual

10 September 2025
Supermicro

Supermicro X13SCW-F Manual

10 September 2025

Bundkort Manualer

Nyeste Bundkort Manualer

Asrock

Asrock W790 WS R2.0 Manual

12 September 2025
Asrock

Asrock Q670M vPro Manual

12 September 2025
MSI

MSI PRO B860M-B Manual

10 September 2025
MSI

MSI PRO B850M-P Manual

9 September 2025
Asus

Asus PRIME B650M-A AX6 II Manual

9 September 2025
MSI

MSI PRO B860M-B WIFI Manual

9 September 2025
Asus

Asus B860M-E Manual

9 September 2025
Asus

Asus PRIME H610M-P D4 Manual

9 September 2025
Asrock

Asrock A620M-C R2.0 Manual

9 September 2025
Asus

Asus B860M-BRO Manual

9 September 2025