SureFire X300T-A-TN Manual

SureFire Ikke kategoriseret X300T-A-TN

Læs gratis den danske manual til SureFire X300T-A-TN (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 21 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 11 anmeldelser. Har du et spørgsmål om SureFire X300T-A-TN, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

USER MANUAL

MAINTENANCE

Use a clean, dry cloth to wipe off body and window. For additional tips

on maintaining your SureFire illumination tool, visit www.sureﬁre.com/

faqs-maintenance.

ACCESSORIES

SureFire offers accessories for most of its illumination tools.

For a complete listing, visit www.sureﬁre.com/partsaccessories.

THE SUREFIRE NO-HASSLE GUARANTEE

We’ll do what it takes to keep your SureFire gear running smoothly.

SureFire warrants that if you — our customer — purchase one

of our products, and we determine that it is defective in material

and/or workmanship during your lifetime, we will repair or replace

it — no hassle!

Our warranty does not cover consumables or normal wear-and-tear

— things like batteries draining, headbands and headpads wearing

out, ink cartridges running out, and switches wearing out — or

damage resulting from abuse, alterations, unauthorized repairs, or

use contrary to SureFire’s user manuals.

Should you need a replacement product, SureFire reserves the

right to replace an obsolete product with a current production,

like model. In the event that any issue with a SureFire product is

not covered under this warranty SureFire can arrange to have the

product repaired for a reasonable fee.

STANDARD DISCLAIMER

Except as speciﬁed above or prohibited by applicable law: all express

or implied conditions and warranties, including, without limitation,

any implied warranty or condition of merchantability or ﬁtness for

a particular purpose, or accuracy of any informational content, are

hereby excluded and disclaimed by SureFire; and in no event will

SureFire be liable for any special, direct, indirect, consequential,

incidental or punitive damages howsoever arising and regardless

of the theory of liability, even if advised of the possibility of such

damages. Products, prices, availability, speciﬁcations, and offers

are subject to change or cancellation at any time without notice.

WARRANTY CLAIMS

For claims, contact Customer Service at 714-545-9444 to obtain a

Return Merchandise Authorization number (RMA#). Then package

the unit carefully and send to (no CODs):

SureFire, LLC.

Repairs Department, RMA#____

17680 Newhope Street, Suite B

Fountain Valley, CA 92708

SureFire will pay any reasonable shipping costs to return the unit to you.

18300 MT. BALDY CIRCLE

FOUNTAIN VALLEY, CA 92708-6122

WWW.SUREFIRE.COM

Patents: 7117624, 7591098, 7325352, 7360333, 7310903

HANDGUN LIGHT, LEVER LATCH MOUNT

X300T-A

X300T-A-TN

X300U-A

X300U-A-TN

SERiES A-MOUNt

X300T-A X300U-A

OUTPUT 650 lumens 1,000 lumens

RUNTIME 1.5 hours 1.25 hours

PEAK BEAM INTENSITY 66,000 candela 11,300 candela

DISTANCE 514 meters 213 meters

CONSTRUCTION Aluminum

FINISH Hard Anodized (MIL-A-8625 Type III, Class 2)

WEIGHT (w/batteries) 4.0 oz (113 g)

LENGTH 3.76 in (9.55 cm)

BEZEL DIAMETER 1.125 in (2.9 cm)

BATTERIES Two 123A lithium (incl.)

SWITCHING

Ambidextrous push/toggle

LIQUID INGRESS

PROTECTION

IPX7, Submersion up to one meter for 30 minutes

SPECIFICATIONS

All performance claims tested to ANSI/NEMA FL1-2019 Standard.

Revision C 07-2022

71-01-1138

X300T-A, X300T-A-TN

X300U-A, X300U-A-TN

KIT CONTENTS:

• X300 WeaponLight

• Battery Cover

• Battery Cover Retaining Pin

• Universal Lever Latch (marked “U,” installed)

• Picatinny Lever Latch (marked “P”)

• Spring (installed)

• Rail Latch Lock

• Universal Rail Latch (marked “U”)

• Picatinny Rail Latch (marked “P”)

• Lock Actuator

• Lock Actuator Screw

• 5/64-inch Hex Wrench

• One Tube Loctite 242

• Two 123A Batteries

BATTERY INSTALLATION / REPLACEMENT

1. Attach Battery Cover (Figure 1).

2. Insert two 123A Batteries with terminals oriented as shown in

the engraved schematic on X300 body (Figure 1).

3. Close Battery Cover until compartment latch clicks and locks

cover in place.

4. To replace batteries, depress latch to open Battery Cover.

5. Install fresh batteries and re-secure Battery cover.

6. (OPTIONAL) Using pliers, insert battery cover Retaining Pin

through both holes in latch bracket, until pin locks in place and

latch cannot be released (Figure 2).

CAUTION: Mixing a depleted battery with a new battery can

cause damage to the weaponlight. Always use two fresh batter-

ies when replacing old ones.

MOUNTING X300 TURBO TO WEAPON

X300 A-series weaponlights ship with a Universal Lever Latch

installed. The Lever Latch system provides a secure attachment

point using a spring-assisted latch that can be actuated by hand

and is done without tools. A Picatinny Lever Latch is included to ﬁt

host weapon accessory rails with Picatinny cross slots.

X300 A-series weaponlights also include the Rail-Lock system that

provides a more robust attachment platform that is also easily

actuated by hand but does require a hex key to rigidly attach to

a weapon accessory rail. A Universal and Picatinny Rail-Lock is

included to ﬁt host weapon accessory rails with Universal and

Picatinny cross slots.

INSTALLATION & REMOVAL (LEVER LATCH SYSTEM)

1. Align Rail Guides with grooves of Universal accessory rail.

2. Pull down on Lever Latch tabs and slide X300 onto the accessory

rail of host weapon until Lever Latch clicks and locks securely in

place (Figure 3).

3. To remove, press down on Lever Latch tabs and slide

X300 forward off rail (Figure 3).

INSTALLATION & REMOVAL (RAIL-LOCK SYSTEM)

1. Pull Rail Latch Lock tabs rearward to release Rail Latch. Slide Rail

Latch to the open position–Rail Latch is not designed to come all the

way out (Figure 4).

2. Slide X300 onto host weapon accessory rail and align rail latch with

accessory rail slot on host weapon. Press in Rail Latch until it locks

in place (Figure 5).

3. Insert 5/64-inch Hex Wrench into slot and tighten Lock Actuator Screw.

4. To remove, loosen Lock Actuator Screw with Hex Wrench, pull

back Rail Latch Lock tabs, slide Rail Latch to the open position

and remove weaponlight from host weapon accessory rail.

LEVER LATCH REMOVAL & INSTALLATION

1. Use the 5/64-inch Hex Wrench to remove Rail Guides by

unscrewing the Hex Screws (Figure 6).

2. Lift up and remove Lever Latch from hinge pin. Capture Lever

Latch Spring and retain. Retain and store replaced Lever Latch

future use (Figure 7).

3. Hook Lever Latch onto X300 Hinge Pin so the SureFire logo is

visible. Place Spring under Lever Latch so it nests in round slot

on the underside of Lever Latch and on the top of the X300 body

(Figure 7).

4. Press down and hold Lever Latch. Insert screws into Rail

Guides. Align left Rail Guide with holes on left side of body and

tighten screws using an alternating pattern until all three screws

stop turning. Repeat for right side Rail Guide. Tighten screws to 4

in-lbs, or use the 5/64” hex wrench and tighten screws with light

pressure (do not over-tighten).

5. While holding down Lever Latch tabs, slide X300 onto host

weapon accessory rail until Lever Latch’s crossbar mates with

accessory rail cross slot.

6. (OPTIONAL) Sparingly apply Loctite 242 to each Rail Guide Screw

to further prevent screws from loosening from live ﬁre use.

RAIL-LOCK® INSTALLATION

1. Using the 5/64-inch Hex Wrench, remove both Rail Guides

(Figure 6).

2. Remove Lever Latch and Spring. Store both for future use.

3. Insert Lock Actuator into slot on Rail Latch Lock.

Insert Lock Actuator Screw into screw hole and turn

clockwise until it engages Lock Actuator (Figure 8).

4. Place hooked end of Rail Latch Lock onto Hinge Pin and insert

Rail Latch Lock (actuator facing down) so it ﬁts into slot on top of

body. Lock Actuator Screw may need to be loosened or tightened

for screw head to align with screw head slot (Figure 9).

5. Select appropriate Rail Latch.

6. Lift front edge of Rail Latch Lock. Connect slotted side of Rail

Latch to front edge of Rail Latch Lock (Figure 8).

7. Lower Rail Latch Lock and attached Rail Latch, ﬁtting both into

their designated slots in body.

8. Insert screws into Rail Guides. Align left Rail Guide with holes

on left side of body and tighten screws using an alternating

pattern until all three screws stop turning. Repeat for right side

Rail Guide. Tighten screws to 4 in-lbs, or use supplied 5/64”

hex wrench and tighten screws with light pressure (do not over-

tighten). One Rail Guide has a notch, which ﬁt over the Rail

Latch (Figure 6).

9. (OPTIONAL) Sparingly apply Loctite 242 to each Rail Guide

Screw to further prevent screws from loosening from live ﬁre use.

LIGHT OPERATION

For momentary-on light operation, press and hold either the right

or left side of tailcap toggle switch; release to turn light off (Figure 10).

For constant-on operation, rotate tailcap toggle switch up or

down; rotate in the opposite direction to turn light off (Figure 10).

Note: Remote switches are available for SureFire X-Series

WeaponLights. Visit www.sureﬁre.com/parts-accessories/

switches.html

FIGURE 1

FIGURE 2

HINGE PIN

HINGE COVER

RELEASE

BEFORE INITIAL USE, REMOVE BATTERY INSULATOR

FIGURE 6

SCREWS RAIL GUIDES

NOTCH

FIGURE 7

LEVER LATCH

SPRING

FIGURE 8

RAIL LATCH

LOCK

ACTUATOR RAIL LATCH

LOCK

FIGURE 9

LOCK ACTUATOR

SCREW

SCREW HEAD

SLOT

FIGURE 5

FIGURE 4

RAIL LATCH

FIGURE 3

FIGURE 10

SERiES A-MOUNt

PULL DOWN TABS

ON BOTH SIDES

Produkt Specifikationer

Mærke:	SureFire
Kategori:	Ikke kategoriseret
Model:	X300T-A-TN

Har du brug for hjælp?

Hvis du har brug for hjælp til SureFire X300T-A-TN stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret SureFire Manualer

SureFire Silent Flight 320 Manual

10 Juni 2025

SureFire XR1-A Manual

12 Marts 2025

SureFire XC1-C Manual

12 Marts 2025

SureFire XC2-B-RD Manual

12 Marts 2025

SureFire XR2-A-RD Manual

12 Marts 2025

SureFire Portus X1 Manual

12 December 2024

SureFire Portus X2 Manual

12 December 2024

SureFire X300T-B Manual

2 December 2024

SureFire X300T-A-TN Manual

2 December 2024

SureFire XH30 Manual

1 December 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

AmpliVox Airvox SW695 Manual

15 Juni 2025

Stiga SBC 635 KD Manual

15 Juni 2025

Cleveland 36CGM300 Manual

15 Juni 2025

Gourmia GTF7970 Manual

15 Juni 2025

Planet Audio P9630B Manual

15 Juni 2025

ORNO OR-DOM-YR-934UD Manual

15 Juni 2025

Lavex 842CD12VST12 Manual

15 Juni 2025

Marshall RCP-PLUS Manual

15 Juni 2025

Hughes & Kettner BassForce XL Manual

15 Juni 2025

Hughes & Kettner Red Box Mk III Manual

15 Juni 2025