Swann SWNVW-470CAM Manual

Swann Overvågningskamera SWNVW-470CAM

Læs gratis den danske manual til Swann SWNVW-470CAM (2 sider) i kategorien Overvågningskamera. Denne vejledning er vurderet som hjælpsom af 20 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 10.5 anmeldelser. Har du et spørgsmål om Swann SWNVW-470CAM, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

1 2 3

4 5 6

7 8 9

SwannSecure

Quick Start Guide

Welcome!

Lets get started.

Congratulations on the purchase of your SwannSecure device. This quick start guide will

assist you with getting your device up and running as soon as possible. We recommend that

you connect everything and give it a try before you do a permanent installation, to make sure

nothing was damaged during shipping. On the other side of this guide is a detailed connection

map which illustrates the various connections available.

A) LAN - Connect this to your home network.

B) Reset - If the device becomes unrespon-

sive, use a paperclip to reset.

C) Audio Out - For connecting headphones or

speakers.

D) USB - Connect the mini USB cable here. This

is used to update the firmware when available.

E) HDMI - If you have a digital TV with HDMI

input, connect this to an available input.

F) Power - This is where you connect the power

adapter. When connected, the internal battery

will start charging.

QH470KIT191213E | © Swann 2014

AGetting to know your device

BStep One CStep Two

DStep Three EConnecting to your HDTV (optional) FConnect to your Home Network

A B C D E F

L M

G) Screw Mount - Use the provided

screws to mount the device to the

wall.

H) Power LED - The power LED will

turn red when the device is powered

with the power supply.

I) Power Button - Press and hold

this button until the device turns

on. Press and hold to bring up the

shutdown menu.

J) Micro-SD Card Slot - Insert the

provided Micro-SD card into this slot.

K) Speaker - Audio transmitted from

the camera will be heard from here.

L) Microphone - The microphone

does not function on this model.

M) Menu Button - Press this button

to access the on-screen menu. You

will see a blue light when the button

is pressed.

N) Wi-Fi Antenna - Adjust the

antenna so they are placed vertically.

O) Stand - Pull out the stand until it

clicks into place.

P) Microphone - Allows the camera

to hear nearby sounds and stream

them with the video.

Q) Stand - The included Wi-Fi

antenna connects here.

Peel off the plastic cover that is protecting

the LCD display. Connect the DC 5V power supply to the

power input on the device. There will be

a label on each power supply denoting

which end is plugged into what device.

Connect the power

connection on the

camera to the power

extension cable.

Connect the DC 12V

power supply to the

other end of the power

extension cable.

LAN

Reset Button

Screw the included

Wi-Fi antenna

clockwise to the gold

coloured connection

on the camera.

Continue until it is

securely fastened.

HDMI IN 2/MHL

HDMI IN 1(DVI)

Connect the mini

HDMI cable (supplied)

to the HDMI input

on the device, and

connect the other

end to a spare HDMI

input on the TV.

U SB Inte rnet Et he rnet

432

An Ethernet connection is required

for Internet access when the device

is in AP mode (see Setup Wizard

for more information). Connect

the Ethernet cable (supplied) to

the LAN connection on the device,

and then connect the other end to

a spare port on your router.

You’re now ready to run through “The Setup Wizard”.

The LAN connection is mainly used for configuration to your Wi-Fi network.

FCC warning: The transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. This

equipment complies with the FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be

installed and operated with a minimum distance of 20cm between the radiator and any part of your body.

10 11 12

13 14 15

16 17 18

Welcome!

Lets get started.

QH48_1550H181013E | © Swann 2013

Connect the mini HDMI cable (supplied)

to the HDMI input on the device, and

connect the other end to a spare HDMI

input on the TV.

Insert the provided Micro-SD

card into the TF slot, which is

located next to the power but-

ton, until it clicks into place.

Connect the power connection on the

camera to the power extension cable.

Connect the DC 12V power supply to the

other end of the power extension cable.

QH470KIT191213E | © Swann 2014

Peel off the plastic cover

that is protecting the LCD

display.

US B In ter ne t Et her ne t

432

HDMI IN 2/MHL

HDMI IN 1(DVI)

Connect the DC 5V power supply to the

power input on the device. There will be

a label on each power supply denoting

which end is plugged into what device.

An Ethernet connection is required for

Internet access when the device is in AP mode

(see Setup Wizard for more information).

Connect the Ethernet cable (supplied) to

the LAN connection on the device, and then

connect the other end to a spare port on your

router.

Connect the mini USB cable here.

This is used to update the firmware

when available.

Reset Button

LAN

What are the additional connections for?

Reset - If the device becomes unresponsive,

use a paperclip to reset.

Audio Out - For connecting headphones or

speakers.

Adjust the antenna

so they are placed

vertically.

The LAN connection is mainly used for

configuration to your Wi-Fi network.

FCC warning: The transmitter must not be co-

located or operated in conjunction with any other

antenna or transmitter. This equipment complies

with the FCC RF radiation exposure limits set forth

for an uncontrolled environment. This equipment

should be installed and operated with a minimum

distance of 20cm between the radiator and any part

of your body.

Produkt Specifikationer

Mærke:	Swann
Kategori:	Overvågningskamera
Model:	SWNVW-470CAM
Type:	IP-sikkerhedskamera
Bredde:	60 mm
Dybde:	95 mm
Højde:	165 mm
Vægt:	350 g
Produktfarve:	Hvid
Wi-Fi:	Ja
Formfaktor:	Kugle
Ethernet LAN-porte (RJ-45):	1
Ethernet LAN:	Ja
Maksimal opløsning:	1280 x 720 pixel
Hurtig installationsvejledning:	Ja
Kabler inkluderet:	UTP
Forbindelsesteknologi:	Kabel & trådløs
AC-adapter inkluderet:	Ja
Monteringstype:	Loft/væg
Understøttet placering:	Indendørs & udendørs
Sensortype:	CMOS
Samlet antal megapixels:	1 MP
Minimumsbelysning:	0 Lux
Nattesyn:	Ja
Synsfelt vinkel (FOV):	65 °
Antal lysende LED:	36
Nattesyn, afstand:	15 m