Swann SWNVW-490CAM Manual

Swann Overvågningskamera SWNVW-490CAM

Læs gratis den danske manual til Swann SWNVW-490CAM (2 sider) i kategorien Overvågningskamera. Denne vejledning er vurderet som hjælpsom af 44 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 22.5 anmeldelser. Har du et spørgsmål om Swann SWNVW-490CAM, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

WIFI1080PCAM231018E | © Swann 2018

Helpdesk & Technical Support

Technical Support E-mail: tech@swann.com

Technical Support Website: support.swann.com

Telephone Helpdesk

USA Toll Free 1-800-627-2799

USA Parts & Warranty 1-800-627-2799

(M-F, 9am-5pm US PT)

AUSTRALIA 1800 788 210

NEW ZEALAND Toll Free 0800 479 266

UK 0808 168 9031

Swann Communications warrants this product against defects in workmanship and material for a period of

one (1) year from its original purchase date. You must present your receipt as proof of purchase for warranty

validation. Any unit which proves defective during the stated period will be repaired without charge for parts or

labour or replaced at the sole discretion of Swann. The end user is responsible for all freight charges incurred

to send the product to Swann’s repair centres. The end user is responsible for all shipping costs incurred when

shipping from and to any country other than the country of origin.

The warranty does not cover any incidental, accidental or consequential damages arising from the use of or

the inability to use this product. Any costs associated with the fitting or removal of this product by a tradesman

or other person or any other costs associated with its use are the responsibility of the end user. This warranty

applies to the original purchaser of the product only and is not transferable to any third party. Unauthorized end

user or third party modifications to any component will render all warranties void. By law some countries do not

allow limitations on certain exclusions in this warranty. Where applicable by local laws, regulations and legal

rights will take precedence.

For Australia: Our goods come with guarantees which cannot be excluded under Australian Consumer Law.

You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably

foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be

of acceptable quality.

This equipment has been tested and found to comply with the limits for Class A digital device, pursuant to part

15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference

in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment and the receiver

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected

• Consult the dealer or an experienced radio/TV technician for help

These devices comply with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) These devices may not cause harmful interference.

(2) These devices must accept any interference received, including interference that may cause undesired op-

eration.

Wi-Fi Series

1080p Security Camera

Add-on Camera for Swann HD Wi-Fi Monitoring Systems

EN INSTRUCTION MANUAL

Security Made Smarter

Limited Warranty - Terms & Conditions5 FCC Verification6

Introduction

Congratulations on your purchase of this Wi-Fi

Series 1080p Security Camera.

• A state of the art surveillance camera with

1080p video technology

• Seeing is believing with 1080p HD Cameras

perfect for most locations around home or

business

• Latest infrared cut filter for amazing night vi-

sion for clarity in low light

• Sturdy metal construction suits indoor &

outdoor applications with IP66 rating for any

weather conditions

• Deter thieves, safeguard loved ones, protect

your property & cut the cost of crime with

this professional surveillance camera from

Swann

Important instructions

1. Make sure your camera is fixed correctly and

stable if fastened in place.

2. Only use the supplied power extension cable

and power adapter (12V).

3. Do not operate if wires and terminals are ex-

posed.

Please note: Have a look at the camera location

tips included with your NVR, to select the best lo-

cation for your camera (the camera location tips

provided here are for general purpose only).

Important note: All jurisdictions have specific

laws and regulations relating to the use of cam-

eras. Before using any camera for any purpose,

it is the buyer’s responsibility to be aware of all

applicable laws and regulations that prohibit or

limit the use of cameras.

Connecting your Camera

Mounting your Camera

Camera Location Tips

Some things to consider when choosing a location -

1. The effective signal range of your Wi-Fi signal

2. What you want to monitor and where you’ll get the

best view of it.

3. How you’re going to connect your camera to your

monitoring system; remember that cables and

connections should be kept out of the weather.

4. How to keep your camera out of harm’s way. It’s

recommended to mount your camera at an elevated

position.

5. Place your camera as close to the area of interest

as practicable. The best position is from about 4m

(13ft) above looking slightly down, keeping in mind the

details you are looking for.

6. Although the sky looks nice when you look at the

live view from your camera, it is an unlikely direction

for an offender to approach, make sure your camera

has minimal sky in it as the light in daylight can make

the foreground of the image darker.

7. Think about the most likely way a potential offender

may approach your home, use your cameras to give

you the best coverage of these areas.

8. The camera’s casing is resistant to water, different

weather conditions and tampering. It would take

an overwhelming event of this kind to damage the

housing of your camera. However, the cable and

connector are vulnerable and require protection.

9. Even though your camera is weather and water-

resistant, prolonged exposure to adverse weather

conditions such as sunlight or excessive moisture,

may eventually damage the internal components of

the camera and adversely affect its performance.

10. Don’t put your cable near live electrical wiring.

AC electricity generates radio “noise” which can

interfere with the signal from your camera.

1. Use a clockwise motion to connect the provided Wi-

Fi antenna to the Wi-Fi connection located at the rear.

Connect the Power Input on the camera to the Power

Output on the Power Extension Cable.

2. Connect the Power Input on the Power Extension

Cable to the Power Adapter.

3. Connect the Power Adapter to a wall socket then

press the wall socket’s switch to the on position.

Reset/Pair: To reset, press and hold the button,

connect power and continue holding for 10 seconds.

You can also pair the camera to your NVR (if network

settings are changed).

Reset/Pair

Power

Input

Power

Output

Power

Input

Power Cable

Power Adapter

Connect the Power Adapter to

a power outlet then press the

outlet’s swith to the ON position

to supply power.

The camera can be mounted onto a flat surface using the screws and wall plugs provided. The surface must

have sufficient strength to hold the camera. Before mounting your camera, remove the Wi-Fi antenna first then

reattach when finished.

→ Position the camera in the location you want to mount it, and mark the screw holes on the surface to

position the screws (a mounting template has been included). Then, using the appropriate screws for the

surface you’re fixing the camera to, secure the camera in place.

→ If you’re mounting to a wooden surface, then screw the camera directly to the surface.

→ If you’re mounting to a masonry surface (bricks, concrete or similar), then you’ll need to use wall plugs.

Adjusting the camera angle

→ Loosening the locking ring will allow you to pan, tilt and rotate the camera.

→ Remember to tighten the locking ring to secure the camera’s position in place after you’ve finished

adjusting the viewing angle of the camera.

Produkt Specifikationer

Mærke:	Swann
Kategori:	Overvågningskamera
Model:	SWNVW-490CAM

Har du brug for hjælp?

Hvis du har brug for hjælp til Swann SWNVW-490CAM stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Overvågningskamera Swann Manualer

Swann SWIFI-FLOCAM2 Manual

12 September 2025

Swann SWNVK-88980W4 Manual

15 August 2025

Swann SONVK-886806D Manual

14 August 2025

Swann SRDVR-85680W Manual

13 August 2025

Swann CONV16-85806B2FB Manual

13 August 2025

Swann SWDVK-846808MQBWF Manual

13 August 2025

Swann SWDVK-856808MQB Manual

13 August 2025

Swann SWDVK-446854D Manual

13 August 2025

Swann SONVK-1689808B8D Manual

13 August 2025

Swann SONVK-1690008DE Manual

13 August 2025

Overvågningskamera Manualer

Nyeste Overvågningskamera Manualer

Hikvision DS-2CD4125FWD-IZ Manual

14 September 2025

Intellinet 524421 Manual

13 September 2025

Intellinet INT-PSNC-UM-1106-07 Manual

13 September 2025

3xLOGIC VISIX Manual

13 September 2025

Intellinet NFC30 Manual

13 September 2025

3xLOGIC VX-4V-OD-RI Manual

12 September 2025

EZVIZ C7 Dual Manual

12 September 2025

3xLOGIC VX-SMBK-D Manual

12 September 2025

3xLOGIC VISIX V Manual

12 September 2025

3xLOGIC VX-2S-OP-30X Manual

12 September 2025