System Audio Saxo 30 Manual

System Audio Højttaler Saxo 30

Læs gratis den danske manual til System Audio Saxo 30 (4 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 55 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 28 anmeldelser. Har du et spørgsmål om System Audio Saxo 30, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

cool scandinavian loudspeakers

SA saxo series

manual english

ver. 01.12.02e

Welcome

Thank you for choosing SA

The mission of System Audio A/S is to enthral

people with the best possible sound.

A pair of SA loudspeakers will create a feeling of

being close to the performers. The SA home

theatre will drag the audience deeper into the

action.

To achieve the best performance we recommend

that you careful read through this guide before

setting up your new SA loudspeakers.

More information is available on

www.system audio.com-

! important

check the serial number

The serial number is on a sticker on the speakers

backside. You may wish to note the serial number

down on your invoice and file it along with your

insurance policy. Please contact your dealer if

there is no serial number on the speaker.

warranty

System Audio A/S provides a two year warranty -

against production defects and a five year warranty -

on speaker units and crossover network. The

warranty does not cover misuse. Repairs and

service are done by the dealer or associated

workshop. Any changes made to the construction

will annul the warranty.

running in new loudspeakers

All new high quality loudspeakers need a certain

period of running-in time. As SA uses long stroke -

bass driver with natural rubber surroundings our

loudspeakers needs at least 50 100 hours of -

actual music playing at decent sound level. You

will notice a gradual improvement in sound quality.

No particular precautions need to be taken during

those hours.

! important

 Always let the product reach room temperature

before plugging it in. Condensation may arise

in the electronic circuitry when moving the

speaker from cold to warm surroundings.

Such moisture may damage the speaker’s

components.

 Never use the product in damp settings.

 Avoid touching the speaker elements.

 Foreign bodies must not be inserted into the

bass reflex ports of the speaker.

 refrain from playing the speakers at a higher

level than the music is still being reproduced

clear and undistorted. Distortion may damage

the drivers and electronic components.

Damages coursed by overloading the

loudspeakers are not covered by the warranty.

contents of the package

SA saxo 1: SA saxo 10:

2 x SA saxo 1 1 x SA saxo 10

2 x front grill 1 x front grill– vertical

8 x rubber feet 1 x front grill– horizontal

4 x rubber feet

SA saxo 8

2 x SA saxo 8 SA saxo 30:

2 x front grill 2 x SA saxo 30

8 x rubber feet 2 x front grill

4 x reflex port plugs 8 x 6mm rubber feet

SA saxo sub 8 SA saxo sub 10:

1 x SA saxo sub 8 1 x SA saxo sub 10

1 x front grill 1 x front grill

1 x power cord 1 x power cord

! important

Accessories are placed in holes in the Styrofoam.

Make sure you remove all parts before putting

away the packing materials. If any part is missing

please contact you dealer as soon as possible.

set up floor standing loudspeakers-

The SA saxo 30 are designed to stand on the floor.

The speakers can, and should, be placed 20 – 40

cm away from a solid wall. The distance may be

increased or decreased depending on the

acoustics of the room and the sound you want.

After the 50 hour run in period and appropriate - -

adjustments, the speakers should be mounted on

rubber feet or spikes.

rubber feet. If the speaker is positioned on a solid

underlay, e.g. a wooden floor, we recommend that

you use the rubber feet. They break the link with

the floor, which often causes vibrations.

spikes. (bought separately) If the speakers are

placed on a soft underlay, e.g. a carpet, we

recommend that you use spikes. It is important that

the speakers are completely vertically upright and

do not move from side to side. If necessary, spend

plenty of time adjusting spikes and locknuts to

make sure the speaker rests evenly on all 4 spikes.

Once you have finished adjusting them, tighten the

nuts.

To make positioning easier you might want to wait

with the mounting of rubber feet or spikes until after

the right position for the speakers are found.

set up compact loudspeakers-

The SA saxo 1 and 10 are designed to be mounted

on the table stand TS1. For the SA saxo a -

dedicated wall mount is also available (see page 4)

SA saxo 1 and 10 can also be placed directly on

bookshelves. For optimal performance there must

be free air passage too the reflex port on the rear.

Allow 10 cm. behind the speaker and on one side

of the speaker. We recommend using the included

rubber feet's underneath the speakers to give

them a firm stand that improves dynamics and

precision.

set up centre channel speaker-

The SA saxo 10 is also ideal as centre speakers.

The speaker can be placed horizontal over or

underneath the TV-screen on the included rubber

feet, or on the TS1 stand. Included is also a

dedicated front grill for horizontal use.

sound quality

hours 100 200 300 400 500

unpacking

1Place the carton bottom-up.

Cut the tape with a knife not deeper -

than 5 mm!

2Turn the carton around and lift off

3pull off the protecting Styrofoam

4remove all accessories from the carton

www.system audio.com-

Produkt Specifikationer

Mærke:	System Audio
Kategori:	Højttaler
Model:	Saxo 30
Bredde:	130 mm
Dybde:	200 mm
Højde:	990 mm
Vægt:	20100 g
Produktfarve:	Sort
Udgangseffekt (RMS):	125 W
Anbefalet brug:	Universel
Frekvensområde:	45 - 25000 Hz
Impedens:	4 ohm (Ω)
Forbindelsesteknologi:	Ledningsført
Højttaler, type:	2-vejs
Lyd-output kanaler:	- kanaler
Højttaler, placering:	Gulv
Antal drivere:	3
Diskanthøjttaler:	Ja
Antal drivere til diskant:	1
Sensitivitet:	89 dB
Diskant diameter:	1 "
Bashøjttaler:	Ja
Antal bashøjttalerdrev:	2
Forstærker:	Ingen
Højttaler kabinet:	Refleks
Woofer diameter (britisk mål):	4 "