Tanita D-1000 Manual

Tanita Vægten D-1000

Læs gratis den danske manual til Tanita D-1000 (3 sider) i kategorien Vægten. Denne vejledning er vurderet som hjælpsom af 18 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 9.5 anmeldelser. Har du et spørgsmål om Tanita D-1000, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

Using TANITA Wireless Remote Tabletop Display

Initial Setting

Please make sure the scale is within 17feet (5m) with batteries inserted.

Insert batteries into the remote display.

Press any front panel button to start the communication process.

The wireless icon ( ) on the display will blink while the remote display communicates

with the platform. After the communication is successfully done (wireless icon

disappears), continue to step 1 “Set Hour”.

Note: If the communication fails, the display will show "ErrC", press any front panel

button to restart the communication process.

1. Set Hour

Press / to set hour and then press SET.

The unit will beep once to confirm.

2. Set Minute

Press / to set minute and then press SET.

The unit will beep twice to confirm the programming.

• Resetting time

Press the clock button on the bottom of the remote display.

Then follow the procedure 1 and 2.

Setting and storing personal data in memory

You will receive readings only if data has been programmed into the Tanita Remote Tabletop Display.

1. Select Personal Data Number

Use the SET button to activate the unit. Use / buttons to select a personal data number. Press SET.

2. Set Age

Use / buttons to select age. Press SET.

3. Select Female or Male

Use / buttons to select Female ( ) / Male ( ) / Athlete Female ( / ) / Athlete Male ( / ). Press SET.

4. Specify Height

Use / buttons to select height. Press SET.

5. Select Activity Level (Except D-1100)

Use the / buttons to specify Activity Level. Press the SET button to confirm

The remote display will beep twice and the display will flash all data three times to confirm the programming.

The power will then shut down automatically.

To use the DCI (Daily Calorie Intake) feature properly, you need to set the Activity Level.

Level 1 = Inactive lifestyles (little or no exercise)

Level 2 = Moderately active lifestyles (occasional, low intensity exercise)

Level 3 = Adult involved in intense physical activity

Note: If you select the Athlete Mode, it will automatically set the Activity Level to Level 3.

Switching The Weight Mode

Select your preferred weight mode using the weight mode switch on the bottom of the Remote Display.

Battery Cover

Backlight Button

Upright Position

Taking body composition readings

1. Before proceeding, make sure that the platform is within 17feet (5 m) of the remote display.

2. Press (User) button to turn the unit on and then press / buttons to select personal data number.

( .)Do not stand on the platform

3. Press the SET button to confirm your personal number.

4. When the remote display and platform are paired, the platform will beep once, and the Green Indicator Light will

blink.

5. Step onto the platform while the Green Indicator Light is blinking.

6. After the measurement is complete, the platform will beep twice, readings will automatically show on the remote

display.

7. Carefully step off platform after measurement is complete.

8. At anytime during and after the “Auto Display Process”, the user may use the / buttons to scroll thru the

different results. For advanced scrolling, the user may press and hold / button.

Upon reading the desired readings, release the button to view the result, readings will appear for 30 seconds before

the unit automatically shuts off.

Note: For children (age 7-17), the unit will only display the Weight and the Body Fat % (it will not display the Healthy Range

Indicator).

Recall Function

The previous readings of the following features can be obtained using the recall function.

• Weight • Body Fat % • Total Body Water % • Muscle Mass

• BMR/Metabolic Age or DCI/Metabolic Age • Visceral Fat Level

To obtain previous readings, press the SET button while the current readings are being displayed.

The display will show the previous readings. To see other previous readings, press for each desired reading.

Press SET again to go back to the current result display.

Note: For Children (age-7-17), the unit will only display the previous Weight and the Body Fat %.

Programming The Guest Mode

Guest mode allows you to program the unit for a one-time use without resetting a Personal data number.

Press button to activate the unit. Then follow the steps: Set Age, Select Female or Male, and Specify Height.

Taking Weight Measurement Only

Press the Weight-only key.

Step onto the platform while the Green Indicator Light is blinking.

After the measurement is complete, the platform will beep twice, readings will automatically show on the

remote display. Carefully step off platform after measurement is complete.

Warning

Do not use the body fat reading feature of this product if you have a pacemaker or other electronic implanted medical device.

Produkt Specifikationer

Mærke:	Tanita
Kategori:	Vægten
Model:	D-1000

Har du brug for hjælp?

Hvis du har brug for hjælp til Tanita D-1000 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Vægten Tanita Manualer

Tanita InnerScan BC-570 Manual

30 September 2024

Tanita BF-662W Manual

19 September 2024

Tanita BC-333LE Manual

2 September 2024

Tanita BC-G01 Manual

31 August 2024

Tanita BC-532 Manual

20 August 2024

Tanita HD-395 Manual

15 August 2024

Tanita PW-630MA Manual

13 August 2024

Tanita BC-530 Manual

10 August 2024

Tanita BF-576 Manual

9 August 2024

Tanita InnerScan UM-075 Manual

5 August 2024

Vægten Manualer

Nyeste Vægten Manualer

Brecknell SBI-521 Manual

4 Marts 2025

Ideal IZ9201 Manual

27 Februar 2025

Inventum PW518G Manual

15 Januar 2025

Lanaform LA090306 Manual

15 Januar 2025

PCE Instruments PCE-BSW 7 Manual

13 Januar 2025

Sencor SBS 8800BK Manual

12 Januar 2025

Soehnle Style Sense Safe 300 Manual

12 Januar 2025

Salter 9193 BK3R Manual

12 Januar 2025

Kern WTB 10K-3N Manual

12 Januar 2025

Kern PES 2200-2M Manual

12 Januar 2025