Tascam IF-CB/DM Manual

Tascam Ikke kategoriseret IF-CB/DM

Læs gratis den danske manual til Tascam IF-CB/DM (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 114 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 57.5 anmeldelser. Har du et spørgsmål om Tascam IF-CB/DM, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

IF-CB/DM

CobraNet Interface Card

D01106320A

Introduction

Thank you very much for purchasing the TASCAM IF-CB/

DM CobraNet™ Interface Card for TASCAM DM-3200

and DM-4800 mixers.

This Interface Card allows a TASCAM DM-3200/DM-4800

to be connected to a CobraNet digital audio network and to

send and receive up to 32 channels (16 inputs/16 outputs)

of uncompressed digital audio signals with a sampling

frequency of 48 kHz.

Before using the unit, please take time to read this manual

thoroughly to ensure you understand how to properly set up

and connect the unit, as well as the operation of its many

useful and convenient functions. After you have nished

reading this manual, please keep it in a safe place for future

reference.

You can also download the Owner’s Manual from the

TASCAM web site (http://www.tascam.com).

After reading this manual, we recommend that you visit

the CobraNet website below before using this card. This

site provides valuable information, including an overview

of CobraNet, explanations of technologies, application

methods, examples of use, and tool downloads.

http://www.cobranet.info/

Features

Transmission of up to 32 channels (16 inputs/16 outputs)

•

of audio

Compatible with 24 bit quantization and 48 kHz

•

sampling frequency

Trademarks

TASCAM is a trademark of TEAC Corporation,

•

registered in the U.S. and other countries.

Microsoft and Windows are either registered trademarks

•

or trademarks of Microsoft Corporation in the United

States and/or other countries.

CobraNet is a trademark of Cirrus Logic, Inc.

•

Other company names, product names and logos in this

•

document are the trademarks or registered trademarks of

their respective owners.

Product components

The included items are listed below.

Take care when opening the package not to damage the

items. Keep the package materials for transportation in the

future.

Please contact the store where you purchased this unit if any

of these items are missing or have been damaged during

transportation.

Main unit

• .........................................................................1

Attachment screws

• ..........................................................5

Owner’s Manual (this document)

• ....................................1

Names and functions of parts

1SECONDARY (RJ-45 connector): connector for the

secondary cable

2 PRIMARY (RJ-45 connector): connector for the primary

cable

3 Green indicator

Light or blink slowly when a network cable is

•

connected correctly.

Blink rapidly when data is being transmitted properly

•

over the network.

4Orange indicator

Blink when functioning as the conductor (clock

•

master).

Light when power is properly supplied.

•

Primary and Secondary both blink when an

•

irregularity occurs on the network.

DM-3200/DM-4800 software

version

In order to use the IF-CB/DM card, the DM-4800/DM-3200

must use software version 1.70 or later. The mixer cannot

recognize the IF-CB/DM card when using earlier versions.

Check the TASCAM website (http://www.tascam.com/) for

the latest DM-4800/DM-3200 software and download the

TFI update le.

Install TMCompanion, which is included on the CD-ROM

included with the DM-4800/DM-3200, on the computer

that you are using. Launch TMCompanion and use the TFI

update le to upgrade the software version used by the

DM-4800/DM-3200.

Installing the IF-CB/DM

NOTE

DM-3200: Install the IF-CB/DM in mixer slot 1. It will

•

not function in slot 2.

DM-4800: Install the IF-CB/DM in mixer slot 1 or 3. It

•

will not function in slot 2 or 4.

Turn the mixer power OFF before beginning

•

installation.

1 Remove the five screws from the cover panel of the

slot where you want to install the IF-CB/DM card

(slot 1 on a DM-3200, slot 1 or 3 on a DM-4800), and

then remove the panel. (If that slot already contains

a card, remove the card.)

IF-CB/DM

CobraNet Interface Card

2 Insert the IF-CB/DM card into the slot. Insert the

card completely, aligning its edges with the white

guidelines on the inside of the slot. Push the card

in until it clicks into place and its backplate is even

with the back of the mixer. Do not, however, push the

card too hard. If you are having difficulty inserting it

properly, pull it out once and try again.

3 Use the five screws that you removed earlier or the

five screws included with this card to fix the card in

place.

4 Turn the mixer’s power ON, and open the DIGITAL

screen (with the ALT key indicator lit, press screen

mode selection key 2). Select the SLOT tab (SLOT

1-2 or SLOT 3-4 for the DM-4800), and confirm that

the unit recognizes the installed card. If a “No Card”

message appears, the card might not have been

inserted properly or the screws might not be tight

enough.

Connecting with other CobraNet

devices

After installing the IF-CB/DM card into a DM-4800/

DM-3200 mixer, connect it to other CobraNet devices

through a switching hub.

For the LAN cables, use straight, shielded, twisted pair

cables that are category 5 or higher.

For the switching hub, use a device recommended on the

CobraNet web site.

Set up the CobraNet network so that it is completely

independent from other networks.

Transmission distance

The length of cables that can be used depends on the quality

of the cables and the various other devices located between

the transmitting and receiving devices.

The maximum length that can be used with category 5

cables is 100 m. If transmission over a greater distance

is necessary, multimode optical ber cables can be used

(maximum distance of 2 km).

Mixer control screen

The IF-CB/DM setting screen shown below appears the

same for both DM-3200 and DM-4800 mixers. Press the

ALT key and screen mode selection key 2 to open the

DIGITAL screen, and select the SLOT tab (SLOT 1-2 or

SLOT 3-4 for the DM-4800).

STATUS

This section shows information about the IF-CB/DM card

status.

CLOCK:

This shows whether or not the clock is synchronized and

whether the unit (including the mixer) is a performer or the

conductor.

UNLOCKED

• :

This unit is not synchronized with the clock.

LOCKED,

•

PERFORMER

This unit is a performer and is synchronized with the

clock.

LOCKED,

•

CONDUCTOR

This unit is the conductor and is synchronized with the

clock.

NOTE

When this unit is a performer set the clock source for

•

the mixer to the slot where the IF-CB/DM is installed.

When this unit is the conductor, other devices

•

connected to the same Cobranet as this unit are

synchronized to its clock. We recommend that you set

the clock source for the mixer to the slot where the

IF-CB/DM is installed, but if you select a different one,

use Cobranet Discovery to set it to a device with high

priority as a conductor.

Use Cobranet Discovery, which is a separate appli-

•

cation, to set whether this unit is a performer or the

conductor.

CURRENT:

That shows whether the installed IF-CB/DM card is

currently operating on the PRIMARY or SECONDARY

network connection.

PORT P:

This shows the status of the PRIMARY PORT.

PORT S:

This shows the status of the SECONDARY PORT.

NETWORK

This section shows information about the status of the

network.

IP ADDR:

This shows the IP address of the installed IF-CB/DM card.

2 TASCAM IF-CB/DM

Produkt Specifikationer

Mærke:	Tascam
Kategori:	Ikke kategoriseret
Model:	IF-CB/DM

Har du brug for hjælp?

Hvis du har brug for hjælp til Tascam IF-CB/DM stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Tascam Manualer

Tascam Audio File Manager Manual

17 Marts 2025

Tascam Porta-02MKII Manual

19 September 2024

Tascam DR-10L Pro Manual

23 August 2024

Tascam DP-008 Manual

6 August 2024

Tascam VL-A4 Manual

6 August 2024

Tascam MiNiSTUDIO Creator US-42B Manual

2 August 2024

Tascam TT-M1 Manual

2 August 2024

Tascam MD-02 Manual

1 August 2024

Tascam CG-1800 Manual

31 Juli 2024

Tascam IF-DA8 Manual

27 Juli 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Simrad Active Imaging HD (Thru-Hull) Manual

14 Juni 2025

Garritan Harps Manual

14 Juni 2025

Marshall CV-H20-HF Manual

14 Juni 2025

Aiphone IXW-MAA Manual

14 Juni 2025

Rival HM-743 Manual

14 Juni 2025

Lutec Avony Manual

14 Juni 2025

Giordani G-SAFE & PLAY Manual

14 Juni 2025

Gourmia GAF799 Manual

14 Juni 2025

Arendo 307503 Manual

14 Juni 2025

Hughes & Kettner Tube 100 Manual

14 Juni 2025