TeachLogic Voicelink Plus Manual

TeachLogic Ikke kategoriseret Voicelink Plus

Læs gratis den danske manual til TeachLogic Voicelink Plus (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 92 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 46.5 anmeldelser. Har du et spørgsmål om TeachLogic Voicelink Plus, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Quick Start Guide

Getting to Kno our Sound System w Y

Make note of the location of the speakers and ceiling sensor in

your classroom. Ensure that you have unpacked and charged

your battery-powered microphones. Keep this guide handy

for future reference.

Please note that some amplifier/receiver controls will differ.

Refer to their markings, user manual, or our teachlogic.com

for more information on their function.

STEP 1. USING THE AMPLIFIER/RECEIVER

1. Speakers

2. Ceiling Sensor

3. Wireless Microphones

4. Microphone battery

charger

5. Receiver/Ampli er

1. Power & Status Indicator

• Red: OFF

• Blue: ON and activated

• Amber: STANDBY

2. Mic Channels/Volume Controls

• Green light: Microphone on and connected to

channel

• No light: Microphone is not on; and/or sensor is not plugged

in; and/or sensor is not receiving mic signal

3. Input Volume Controls

• Controls volume of connected external

devices

1 2 3 4 5

4. Input Jack and Volume Control

• Connects additional external devices to the system (ex. iPhone or mp3 player)

5. Output Volume Control and Output Jack

• Connects devices for recording lessons

(1)

STEP 2. USING THE SAPPHIRETM PENDANT MICROPHONE

1. Power button and status indicator

• Solid Red: OFF

• Solid Blue: ON

• Solid Purple: External devices quieted

2. Mute microphone: Brie y press power button once ( ashing blue).

Unmute microphone: Brie y press power button again (solid blue).

3. Aux Input: Connects devices (like music player) to microphone.

4. Priority Switch: Changes volume of devices plugged into amp inputs

• To increase/decrease volume level: Slide button up or down

• To immediately quiet volume level of external device: Push button once

• To resume volume level of external device: Push button again

5. Activate Security Alert Feature (when available)

• Hold Priority Switch down for 5 seconds. The power light on the amp will  ash green,

then return to solid blue.

6. Gain Switch

• There are 3 levels to adjust your microphone volume.

• Set gain at “Normal”. You may reduce the volume by setting it to -3dB or -6bD if your

mic is too loud.

7. Lanyard attachments

• Microphone should rest where your collar bones meet.

8. USB Charge Port (found on the bottom of the mic)

4, 5

STEP 3. USING THE HANDHELD MICROPHONE

(2)

1. ON/OFF switch

2. Battery Level Indicator

• Green: Charged

• Red: Low battery

• Flashing Red: Wrong batteries installed or batteries need replacement

STEP 5. CHARGING THE MICROPHONES

Charger Status Indicator

• Blue: ON

• Red: Battery charging

• Green: Charging complete

• Ensure your microphone is fully charged

before its initial use.

• Charging takes approx 6-8 hrs.

• Battery typically lasts 8-10 hrs.

WHEN REPLACING BATTERIES IN THE

HANDHELD MIC, ALWAYS REPLACE

IN PAIRS. ONLY USE RECHARGEABLE

BATTERIES!

Do not force mics into the cradle. Ensure that both the

charger and Sapphire are aligned in the same direction

facing front as shown.

STEP 4. SETTING UP THE MICROPHONES

3. Sapphire Mic: Connect the

lanyard and place around your

neck so the mic sits between your

collar bones. Set the gain switch to

“Normal” position.

4. Turn “ON” the Sapphire

via the front switch;

push and hold for three

seconds.

5. On the amp, check to con rm that

the LED next to CH A volume control

is illuminated green, indicating IR

signal is being received.

6. Locate yourself directly under a

ceiling speaker.

8. While talking, walk around the room to ensure you

have reception without feedback.

9. Handheld Mic: Repeat this process using CH B to

set the volume.

7. While speaking into the mic, have someone else

slowly increase the volume of CH A. When you begin

to hear a ringing sound (feedback) decrease volume

until it disappears. This is your mic volume setting.

1. Activate the amp by pushing the power

button. The “TL” on the button should be

illuminated blue.

2. Set the CH A and CH B volume controls to

the far counter clockwise position.

STEP 7. TROUBLESHOOTING

1. System is turned on but there is no LED indicator light

• Check if system has been unplugged.

• Verify that electrical outlet is generating power.

2. System has power (LED indicator blue) but no sound

• Make sure microphone is on.

• Ensure the mic signal indicator light is illuminated green.

• Ensure ceiling sensor LED is green. If not, the sensor is not receiving

power.

3. Voice is distorted or sound drops

• Ensure there’s nothing between the mic and ceiling sensor

(mics will not work if placed in pockets, for example).

• Battery charge level may be low. Charge and retest.

Hum

is heard w/computer plugged into Comp/Aux input

• Locate the “COMP ANTI-HUM” switch on the back panel of the amp and

slide to “ON”.

5. Receiver does not “wake up” from standby

• Volume of external device too low when played

• Microphone not on or not working properly

20 0720 22

Produkt Specifikationer

Mærke:	TeachLogic
Kategori:	Ikke kategoriseret
Model:	Voicelink Plus

Har du brug for hjælp?

Hvis du har brug for hjælp til TeachLogic Voicelink Plus stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret TeachLogic Manualer

TeachLogic Maxim IRM-6655 Manual

20 Februar 2025

TeachLogic Quantum II IRQ-6650 Manual

20 Februar 2025

TeachLogic Voicelink Plus Manual

5 August 2024

TeachLogic Matrix IMA-120 Manual

30 Juli 2024

TeachLogic IRQ-3630 Quantum II Manual

27 Juli 2024

TeachLogic IRQ-3120 Quantum II Manual

29 April 2024

TeachLogic Maxim IMA-540 Manual

25 Januar 2024

TeachLogic Spectrum III Manual

24 November 2022

TeachLogic IMA-120 Matrix Manual

19 Oktober 2022

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Navman AUTO300 WIFI Manual

1 August 2025

Navman AUTO550 DUAL Manual

1 August 2025

Newline DV-15023H Manual

1 August 2025

Navman MiVue 720 Manual

1 August 2025

Etna HF2008 Manual

1 August 2025

Grundig 40 VLE 7630 WP Manual

1 August 2025

Navman MiVue 600 DC Manual

1 August 2025

Navman MiVue 830DC Manual

1 August 2025

Navman MiVue 840 Manual

1 August 2025

Navman MiVue 880 DC Manual

1 August 2025