Technoline WS 7208 Manual


Læs gratis den danske manual til Technoline WS 7208 (10 sider) i kategorien Vejrstation. Denne vejledning er vurderet som hjælpsom af 21 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 11 anmeldelser. Har du et spørgsmål om Technoline WS 7208, eller vil du spørge andre brugere om produktet?

Side 1/10
Holder
Detachable
stand
Weather Station
INTRODUCTION:
Congratulations on purchasing this innovative 433MHz Weather Station which displays the
weather forecast, time, indoor temperature, and up to three outdoor temperature readings.
To enjoy the full benefits of this innovative product, please read this operating manual.
Weather Station:
FEATURES:
DCF radio-controlled time reception
LCD clock in 24 hour time display
Indoor and outdoor temperature reading in degree Celsius (°C)
Indoor and outdoor temperature with Minimum and Maximum records
Weather tendency indicator and weather icons
Can receive up to three Outdoor transmitters
Table standing or wall mountable (detachable table stand)
Temperature Transmitter:
Function Keys
Hanging
hole
SETTING UP:
Please follow these steps to ensure that your new Weather Station works correctly with the
temperature transmitter(s):
1. First, insert 2 x AA, IEC LR6, 1.5V batteries into the Weather Station. Once the
batteries are in place, all segments of the LCD will light up briefly. Then the indoor
temperature, the time as -:--, and the weather icons sun and clouds will be
displayed. If the indoor temperature is not displayed after a few seconds, remove the
batteries and wait for at least 30 seconds before reinserting them. Once the indoor
data is displayed proceed to step 2.
2. Within 1-1/2 minutes of activating the Weather station, place 2 x AAA, IEC LR3, 1.5V
batteries into the transmitter.
3. After a few seconds of inserting the batteries into the transmitter, the Weather
Station will start receiving data from the transmitter. The remote temperature will
then be displayed on the Weather Station. If this does not happen after 2 minutes,
the batteries will need to be removed from both units and reset from step 1.
Battery cover
4. The Weather Station can take up to 3 remote transmitters. If you have purchased
additional transmitters, follow step 2 for all extra transmitters. However, ensure that
you leave 10 seconds in between the reception of the last transmitter and the set-up
of the following transmitter. The Weather Station will number the transmitters in the
order of set-up, i.e. the first transmitter will have the temperature displayed with the
channel number 1 against it and so on.
Battery
compartment
Note:
No channel number will show up if there is only one transmitter used.
Battery cover Battery
compartment
5. When all the transmitters are set up, there is a testing period, during which the
display switches quickly between all the received transmitters at random, according
to which random transmission it receives. Pressing any key will stop this process
and the display will show the temperature for the first transmitter. The process also
stops automatically if no keys are pressed for a few minutes.


Produkt Specifikationer

Mærke: Technoline
Kategori: Vejrstation
Model: WS 7208
Produktfarve: Sort, sølv
Kan monteres på væggen: Ja
Antal understøttede sensorer (maks.): 3
DCF radiour: Ja
Min. /maks. Temperatur-hukommelse: Ja

Har du brug for hjælp?

Hvis du har brug for hjælp til Technoline WS 7208 stil et spørgsmål nedenfor, og andre brugere vil svare dig