Texas Instruments LP339N Manual

Texas Instruments Ikke kategoriseret LP339N

Læs gratis den danske manual til Texas Instruments LP339N (14 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 66 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 33.5 anmeldelser. Har du et spørgsmål om Texas Instruments LP339N, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/14

The LP239 is obsolete

nd is no longer supplied.

  

    

SLCS004B − OCTOBER 1987 − REVISED SEPTEMBER 2004

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

DWide Supply-Voltage Range . . . 3 V to 30 V

DUltralow Power Supply Current

Drain . . . 60 µA Typ

DLow Input Biasing Current . . . 3 nA

DLow Input Offset Current . . . ± 0.5 nA

DLow Input Offset Voltage . . . ±2 mV

DCommon-Mode Input Voltage Includes

Ground

DOutput Voltage Compatible With MOS and

CMOS Logic

DHigh Output Sink-Current Capability

(30 mA at VO = 2V)

DPower Supply Input Reverse-Voltage

Protected

DSingle-Power-Supply Operation

DPin-for-Pin Compatible With LM239, LM339,

LM2901

description/ordering information

The LP239, LP339, LP2901 are low-power quadruple dierential comparators. Each device consists of four

independent voltage comparators designed specifically to operate from a single power supply and typically to

draw 60-µA drain current over a wide range of voltages. Operation from split power supplies also is possible

and the ultra-low power-supply drain current is independent of the power-supply voltage.

Applications include limit comparators, simple analog-to-digital converters, pulse generators, squarewave

generators, time-delay generators, voltage-controlled oscillators, multivibrators, and high-voltage logic gates.

The LP239, LP339, LP2901 were designed specifically to interface with the CMOS logic family. The ultra-low

power-supply current makes these products desirable in battery-powered applications.

The LP239 is characterized for operation from −25° °C to 85 C. The LP339 is characterized for operation from

0 C.°C to 70°C. The LP2901 is characterized for operation from −40°C to 85°

ORDERING INFORMATION

TAVIOMAX

AT 25°CPACKAGE†ORDERABLE

PART NUMBER

TOP-SIDE

MARKING

PDIP (N) Tube of 25 LP339N LP339N

0 C°C to 70° ± 5 mV

SOIC (D)

Tube of 50 LP339D

LP339

0 CC to 70

±5 mV

SOIC (D) Reel of 2500 LP339DR LP339

PDIP (N) Tube of 25 LP2901N LP2901N

−40° ° ±C to 85 C 5 mV

SOIC (D)

Tube of 50 LP2901D

LP2901

40 C to 85 C

5 mV

SOIC (D)

Reel of 2500 LP2901DR

LP2901

†Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at

www.ti.com/sc/package.

  ! " #$%! "  &$'(#! )!%*

)$#!" # ! "&%##!" &% !+% ! %"  %," "!$%!"

"!)) -!.* )$#! & #%""/ )%" ! %#%""(. #($)%

!%"!/  (( &%!%"*

1OUT

2OUT

VCC

2IN −

2IN +

1IN −

1IN +

3OUT

4OUT

GND

4IN +

4IN −

3IN +

3IN −

D OR N PACKAGE

(TOP VIEW)

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications o

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

The LP239 is obsolete

nd is no longer supplied.

  

   

SLCS004B − OCTOBER 1987 − REVISED SEPTEMBER 2004

2POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

schematic diagram (each comparator)

5 µA

IN+

IN−

GND

OUT

6 µA

0.2 µA

VCC

0.2 µA

absolute maximum ratings over operating free-air temperature range (unless otherwise noted) †

Supply voltage, VCC (see Note 1) 36 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Differential input voltage, VID (see Note 2) ±36 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Input voltage range, VI (either input) −0.3 V to 36 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Input current, VI ≤ −0.3 V (see Note 3) −50 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Duration of output short-circuit to ground (see Note 4) Unlimited. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Continuous total dissipation (see Note 5) See Dissipation Rating Table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Operating free-air temperature range, TA : LP239 −25° °C to 85 C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

LP339 0° °C to 70 C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

LP2901 −40° °C to 85 C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Package thermal impedance, θJA (see Notes 6 and 7): D package 86°C/W. . . . . . . . . . . . . . . . . . . . . . . . . . . .

N package 80°C/W. . . . . . . . . . . . . . . . . . . . . . . . . . . .

Operating virtual junction temperature, TJ 150°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Lead temperature range 1,6 mm (1/16 inch) from case for 60 seconds: J package 300°C. . . . . . . . . . . . . . . .

Storage temperature range, Tstg −65° °C to 150 C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

†Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings only, and

functional operation of the device at these or any other conditions beyond those indicated in the recommended operating conditions is not implied.

Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

NOTES: 1. All voltage values, except differential voltages, are with respect to the network ground.

2. Differential voltages are at IN+ with respect to IN −.

3. This input current only exists when the voltage at any of the inputs is driven negative. The current flows through the collector-base

junction of the input clamping device. In addition to the clamping device action, there is lateral n-p-n parasitic transistor action. This

action is not destructive, and normal output states are reestablished when the input voltage returns to a value more positive than

− 0.3 V at T

A = 25°C.

4. Short circuits between outputs to V

CC can cause excessive heating and eventual destruction.

5. If the output transistors are allowed to saturate, the low-bias dissipation and the on-o characteristics of the outputs keep the

dissipation very small (usually less than 100 mW).

6. Maximum power dissipation is a function of T

J(max), θJA, and TA. The maximum allowable power dissipation at any allowable

ambient temperature is P

D = (TJ(max) − T

A)/θ

JA . Operating at the absolute maximum T

J of 150°C can impact reliability.

7. The package thermal impedance is calculated in accordance with JESD 51-7.

DISSIPATION RATING TABLE

PACKAGE TA C≤ 25°

POWER RATING

DERATING FACTOR

ABOVE TA = 25°C

TA = 70°C

POWER RATING

TA = 85°C

POWER RATING

J C1025 mW 8.2 mW/°656 mW 533 mW

Produkt Specifikationer

Mærke:	Texas Instruments
Kategori:	Ikke kategoriseret
Model:	LP339N
Type:	Komparator
Bredde:	19.69 mm
Dybde:	6.6 mm
Højde:	4.57 mm
Antal pr. pakke:	25 stk
Pakkedybde:	506 mm
Pakkebredde:	13.97 mm
Pakkehøjde:	11.23 mm
Opbevaringstemperatur (T-T):	-65 - 150 °C
Driftstemperatur (T-T):	0 - 70 °C
Pakketype:	PDIP
Antal kanaler:	4 kanaler
Antal stifter:	14
Bredde (med stifter):	19.69 mm
Højde (med stifter):	8.26 mm
Dybde (med stifter):	10.92 mm