Texas Instruments SN74HC367N Manual


Læs gratis den danske manual til Texas Instruments SN74HC367N (27 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 12 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 6.5 anmeldelser. Har du et spørgsmål om Texas Instruments SN74HC367N, eller vil du spørge andre brugere om produktet?

Side 1/27
SNx4HC367 Hex Buffers and Line Drivers with 3-State Outputs
1 Features
Wide operating voltage range of 2 V to 6 V
High-current 3-state outputs drive bus lines, buffer
memory address registers, or drive up to 15
LSTTL loads
True outputs
Low power consumption, 80-μA max ICC
Typical tpd = 10 ns
±6-mA output drive at 5 V
Low input current of 1µA max
2 Description
The SNx4HC367 is a hex buffer with 3-state outputs.
The device is configured into two banks, one with four
drivers and one with two drivers, each controlled by its
own output enable pin.
Device Information
PART NUMBER PACKAGE(1) BODY SIZE (NOM)
SN54HC367J CDIP (16) 24.38 mm × 6.92 mm
SN74HC367D SOIC (16) 9.90 mm × 3.90 mm
SN74HC367N PDIP (16) 19.31 mm × 6.35 mm
SN74HC367NS SO (16) 6.20 mm × 5.30 mm
SN74HC367PW TSSOP (16) 5.00 mm × 4.40 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
1OE 1
1A1 21Y1
3
2OE 15
2A1 12 2Y1
11
1A2
4
1Y2
5
1A3
6
1Y3
7
1A4 91Y4
10
2A2
14
2Y2
13
Functional Block Diagram
SN54HC367, SN74HC367
SCLS309E – JANUARY 1996 – REVISED MARCH 2022
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.


Produkt Specifikationer

Mærke: Texas Instruments
Kategori: Ikke kategoriseret
Model: SN74HC367N

Har du brug for hjælp?

Hvis du har brug for hjælp til Texas Instruments SN74HC367N stil et spørgsmål nedenfor, og andre brugere vil svare dig