TFA AirCO2ntrol Life 31.5003 Manual

TFA Multimeter AirCO2ntrol Life 31.5003

Læs gratis den danske manual til TFA AirCO2ntrol Life 31.5003 (2 sider) i kategorien Multimeter. Denne vejledning er vurderet som hjælpsom af 29 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 15 anmeldelser. Har du et spørgsmål om TFA AirCO2ntrol Life 31.5003, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

5020-0105 CO2ntrol Life - Operating Instructions

1. Green LED Display (<800ppm)

2. Yellow LED Display (800-1200ppm)

3. Red LED Display ( >1200ppm & buzzer alarm)

4. Mute Button

5. Power lnlet

6. Housing Stand

7. Screw Position

EMC/RFI

Readings may be affected if the uni! is operated within radio frequency electromagnetic eld strength of approximately 3 volts per meter, but the performance of

the instrument will not be permanently affected. Note: Under the electromagnetic eld of 3V/m, the reading will not meet the specication.

Product Overview

Thank you for selecting 5020-0105 desktop C0 2 monitor, 5020-0105 C02 monitor is smart, compact and easy-to-use. In addition to measuring the C0 2

concentration, 5020-0105 can also measure the ambient temperature and the relative humidity (CO 2+Temp.+RH). This product is developed to detect

the presence of C02 in ambient air and help people to take care of lndoor Air Quality. 5020-0105 can be widely used in the ofce building, school,

exhibition hall, shopping mall, meeting room, tness center, restaurant and other public places where personal comfort, healthy is important.

Features:

· Three different LED display shows the current lndoor Air Quality

· Press MUTE button for alarm on/off.

· Built in the LCD Backlight for easy reading in the dark.

Warnings:

· Please take off the AC power adapter and store it weil when this C0 2 monitor left idle for long.

· This C02 monitor is for harne use, not suitable for certifying the lest results.

· lf use this C02 monitor for testing, 5020-0105 does not guarantee the lest results.

1. 2 min. warm-up time when rst time power.

2. The LCD shows 4 bars with 1sec blank cycle during warm-up

3. The MUTE button is disabled during warm-up

4. The device shows the C02 readin after warm-u

Warm-Up Time: 2 MIN.

Press MUTE button to select buzzer on/off. lf the „MUTE“function is off, while C0 2

concentration exceed the alarm level (>1200 ppm), there will be a buzzer.

Note: The device settin with alarm is buzzer on when power on rst time, user can

set the alarm on/off under MUTE function

Usin the MUTE function:

Safety Instructions:

Warning: Your safety is very important to us .To ensure to use the product correctly and safely, we would like to draw your attention to read the warning

and entire User Manual before using the product. These are important safety information and should be observed at all times.

1. Check if the contents of the package are undamaged and complete.

2. For cleaning the instrument please do not use an abrasive cleaner only a dry or moist piece of soft cloth. Do not allow any liquid into the interior

of the device.

3. Please store the measuring instrument in a dry and clean place.

4. Avoid any force like shocks or pressure to the instrument.