The Galley Tap Manual


Læs gratis den danske manual til The Galley Tap (8 sider) i kategorien Vandhane. Denne vejledning er vurderet som hjælpsom af 26 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 13.5 anmeldelser. Har du et spørgsmål om The Galley Tap, eller vil du spørge andre brugere om produktet?

Side 1/8
Galley Tap Installation Guide
THEGALLEY
®
TAP
1
1
Before You Begin Installation
Package Contents
Tools
2. Turn off water supply.
3. Inspect water supplies for signs of damage. Replace if necessary.
4. DO NOT use petroleum-based products on this faucet.
INSTALLATION WARNING: NEVER USE TEFLON TAPE FOR OUT-OF-THE-WALL THREADED CONNECTIONS. USE
PROVIDED CONTENTS ONLY. NOT COMPLYING WITH THIS INSTRUCTION COULD DAMAGE THE PRODUCT AND
GENERATE LEAKAGE.
#2 & #3 PHILLIPS SCREWDRIVERS ADJUSTABLE WRENCH ADJUSTABLE PLIERS
Remove all contents from the package and
identify before installation.
1 - Aerator Key
2 - Galley Tap
3 - Optional Base Ring
4 - Mounting Washer
5 - Mounting Nut with Two Crosshead Screws
6 - Counterweight with two rubber strips
Note: All Hoses come pre-installed into Tap and are
water tested at the factory.
Recommended Pressure Range: 20PSI -
75PSI
Maximum Flow Rate: l.8GPM / 6.8L /min
Maximum Temperature: 150° F
Product is Certified to NSF/ ANSI 372 and conforms with
the lead content requirements for “lead free” plumbing as
e defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act. This
faucet complies with ASME 112.18.1-2018/CSA B125.1-2018
requirements.
2
1
3
5
6
4
TECHNICAL INFORMATION


Produkt Specifikationer

Mærke: The Galley
Kategori: Vandhane
Model: Tap

Har du brug for hjælp?

Hvis du har brug for hjælp til The Galley Tap stil et spørgsmål nedenfor, og andre brugere vil svare dig