ThinkFun Laser Maze Manual

ThinkFun Brætspil Laser Maze

Læs gratis den danske manual til ThinkFun Laser Maze (2 sider) i kategorien Brætspil. Denne vejledning er vurderet som hjælpsom af 33 personer og har en gennemsnitlig bedømmelse på 4.0 stjerner ud af 17 anmeldelser. Har du et spørgsmål om ThinkFun Laser Maze, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Lights and mirrors may make it feel like magic, but it’s really

science and a good dose of brain power that’s needed to

direct the laser beam through this series of mind

challenging mazes. Get ready for a satisfying mental

workout as you ex your strategic thinking muscles and

ignite the targets and your mind!

OBJECT:

For each challenge, arrange the laser and specied tokens

on the grid in order to activate (light up) the indicated

number of targets.

SETUP:

Note: The rst time you play, pull the tab from the bottom

of the laser token to activate the battery.

. Select a challenge card and place it in the card slot at the top

of the game grid for easy reference.

. Set up the tokens on your grid to match the symbols

illustrated on the challenge card.

NOTE: The exact location and

orientation of some tokens will

be given. However, if the

symbol contains a question

mark, it is up to you to

gure out the orientation.

(See Symbols Key Card on page 4.)

. Select the tokens underneath the words

“ADD TO GRID” for use in this challenge.

Any remaining tokens will not be used.

. Make a mental note of the “# OF TARGETS”

identied for the challenge.

SYMBOLS KEY CARD:

The Symbols Key Card is your quick reference guide

to the symbols on the challenge cards.

If a symbol shows the outline of the token, you

must place the token in the cell indicated in the

orientation pictured on the challenge card.

If a symbol contains a question mark, you must

gure out the correct orientation.

NOTE: The Target/Mirror token has two uses and can be

represented by four dierent symbols:

These two symbols mean you must use

this token as a target. (But it may also be

used as a mirror.)

These two symbols mean you need to

determine whether to use the token as

a target, a mirror or both.

ADD TO GRID

LASE

MADE IN CHINA, 104 IN02.. #1004.

LASER MAZE

™

INCLUDES:

Game Grid Game Tokens  Total-

 Challenge Cards with Solutions

& Symbols Key Card

PLACE

EXPERTEXPERT

PLACE

ADVANCEDADVANCED

PLACE

INTERMEDIATINTERMEDIAT

ADD TO GRID

# OF

TARGETS

BEGINNERBEGINNER

LASER MAZE

™

Laser - 

Target/Mirror - 

Beam Splitter - 

Double-Mirror - 

Checkpoint - 

Cell Blocker - 

LASER: Provides the laser

beam. Push the button at

the top of this token to

engage the beam.

TARGET/MIRROR:

Can be used as a target,

a mirror, or both. Only the

transparent red side of the

token is a valid target.

BEAM SPLITTER: Splits the

beam in two paths. One path

is reected 90 degrees and the

other path passes straight

through the token.

DOUBLEMIRROR:

Both sides of this token reect

the beam 90 degrees.

CHECKPOINT:

Serves as a token that the laser

beam must pass through.

CELL BLOCKER: Prevents

other tokens from being

placed in the cell which it

inhabits. This token will not

block the path of the laser.

ADD TO GRID

# OF

TARGETS

CHALLENGECHALLENGE

LASER MAZE

™

TOKEN GUIDE:

MIRROR

TARGET

# OF

TARGETS

MAZE

™

ThinkFun's si iMis on s to

I it Ygn e our Mind!

www.ThinkFun.com

ThinkFun

is the world’s leader in

addictively fun games that stretch and

sharpen your mind. From lighting up young

minds to creating fun for the whole family,

ThinkFun's innovative games and mobile apps

make you think while they make you smile.

LAS R

MAZE

™

SYMBOLS

KEY

   

INSTRUCTION

MANUAL

BEAM-BENDING

LOGIC GAME

BEAM-BENDING

LOGIC GAME

™

STEPS TO PLAY:

1. Each token is designed with a special function. Before

beginning, play with the various tokens on the grid and gain

an understanding of how they work. On page 2 you will see

a Token Guide. In addition, the Symbols Key Card can be

used as a handy reference for identifying the tokens.

2. Place the specied tokens on the game grid. As you place

each token, think carefully about how position and function

can be used to direct the laser beam(s). Take your time and

follow these simple rules:

a. The tokens shown on the grid in the challenge card

illustration must stay in their xed location. If the

symbol contains a question mark, they may be rotated,

but they can not move to a dierent cell.

b. You must place all of the tokens specied under

“ADD TO GRID”.

8 to adult

single player

# OF

TARGETS

CHALLENGECHALLENGE

MAZE

™

ADD TO GRID

# OF

TARGETS

BATTERY REPLACEMENT:

IMPORTANT: BATTERY INFORMATION

1. Always follow the instructions carefully. Use only batteries specied

and be sure to insert them correctly by matching the + and –

polarity markings.

2. Remove batteries if product is not to be played with for a long time.

3. Do not mix old batteries and new batteries, or standard (carbon-zinc)

with alkaline batteries.

4. Remove exhausted or dead batteries from the product.

5. Do not short-circuit the supply terminals.

6. Do not use rechargeable batteries.

NON-RECHARGABLE BATTERIES ARE NOT TO BE RECHARGED.

This device complies with Part

15 of the FCC Rules. Operation

is subject to the following two

conditions: ( ) this device may 1

not cause harmful interference,

and ( ) this device must accept 2

any interference received,

including interference that may

cause undesired operation.

CAUTION

CAU NTIO

LASER RADIATION

DO NOT STARE INTO BEAM

1mW MAX OUPUT at 635-670 nm

CLASS II LASER PRODUCT

This Device complies with

21CFR part 1040.10 and 1040.11

Caution-use of controls or

adjustments or performance

of procedures other than those

specied herein may result in

hazardous radiation exposure.

c. You must activate the exact number of targets specied

on the challenge card.

d. The laser must touch all of the tokens shown on the

challenge card at least once (excluding the Cell Blocker).

Incorrect:

Only 2 of the 3 required

targets are activated

Incorrect:

2 tokens are not used

Correct:

All tokens are used

3. Once you think you’ve correctly arranged the tokens on

the grid, push the button on top of the laser token to

engage the beam.

4. If the correct number of targets are activated and the laser

beam touches all of the tokens on the grid (excluding the

Cell Blocker) – YOU WIN!

CHECK YOUR SOLUTION:

Remember, there is only one correct solution for each

challenge. So when you solve a challenge, ip the card over

to see if your solution matches!

ABOUT THE INVENTOR:

Laser Maze

™

was invented by Luke Hooper, lead designer at

Tekspire Design. A biomedical and mechanical engineer,

Luke got started designing strategy games with his invention

of The Laser Game: Khet

. Through his work, Luke continues to

create products that integrate the latest technology into play.

He hopes Laser Maze will help achieve his goal of changing the

way people see the world through innovative play.

CHALLENGE DEVELOPMENT BY:

Wei-Hwa Huang, Tyler Somer, Luke Hooper,

and Tanya Thompson.

Incorrect:

Only 1 of the 3

“ADD TO GRID”

tokens is used

CAN ICES-3 (B)/NMB-3(B)

6 85 7

Produkt Specifikationer

Mærke:	ThinkFun
Kategori:	Brætspil
Model:	Laser Maze
Batterispænding:	1.5 V
Produkttype:	Brætspil
Pakketype:	Lukket kasse
Materiale:	Cardboard, Plastic
Batteritype:	AG13
Antal understøttede batterier:	2
Anbefalet alder (min.):	8 År
Maksimalt antal spillere:	1
Minimum antal spillere:	1
Genre:	Indlæring
Foreslået køn:	Ethvert køn
Velegnet til indendørsbrug:	Ja
Batterier påkrævet:	Ja
Kompatible batteristørrelser:	AG13
Lydeffekter understøttet:	Ja
Anbefalet alder:	Voksen & barn
Ikke for børn fra 0-3 år:	Ja
Spillebræt er inkluderet:	Ja
Familiespil:	Ingen
Ikke-konkurrerende spil:	Ja
Antal kort:	60 stk
Lærings- og træningsfærdigheder:	Critical thinking training, Logical thinking training
Spilletilstande:	Single-player
Spilleregler inkluderet:	Ja