Thomson 42FS4246 Manual

Thomson TV 42FS4246

Læs gratis den danske manual til Thomson 42FS4246 (10 sider) i kategorien TV. Denne vejledning er vurderet som hjælpsom af 78 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 39.5 anmeldelser. Har du et spørgsmål om Thomson 42FS4246, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/10
EN 6
Use more of your TV
Use subtitles
You can enable subtitles for each TV channel.
Subtitles are broadcast via Teletext or DVB-T/DVB-C
digital broadcasts. With digital broadcasts, you have
the additional option of selecting a preferred subtitle
language.
Turn on/off subtitles
1. Press on the remote control and select Menu
Options > Subtitle.
2. Press OK/► to enter. (Refer to Figure 4.)
3. Select the option, and press to select Subtitle ◄/►
On/Off to turn on/off subtitles.
Enable subtitle languages on digital TV channels
1. Press on the remote control and select Menu
Options > Subtitle > Digital subtitle language.
2. Press ◄/► to select a subtitle language as your
preferred language.
3. ▲/▼ Press to select Digital subtitle language
2nd.
4. Press to select a secondary subtitle language.◄/►
5. Press to close the menu.Exit
Shortcut operation: Press on SUBTITLE the remote
control to directly select a subtitle language available
for selected digital TV programme.
Select a subtitle type on digital TV channels
1. Press on the remote control and select Menu
Options > Subtitle > Subtitle type.
2. Press ◄/► to select a subtitle type. You can select
Hearing impaired to display the hearing impaired
subtitle with your selected language.
Select decoding page language in Teletext
Press on the remote control and select Menu
Options > Decoding page language. Select a
proper type of language in which Teletext will display.
Digital Teletext language
For digital TV channels, your TV could zap to a
service with multiple initial Teletext pages in different
languages. This function allows you to select an
available language as primary language which relates
to different initial Teletext page.
Press on the remote control and select Menu Options
> Digital teletext language. Press to select.◄/►
SPDIF type
Connect to an audio device through the SPDIF
output. Press on the remote control and selectMenu
Options > SPDIF type. Select a proper sound type
from the list for digital programmes.
- If the current programme outputs sound in Dolby D
format, then either or can be selected.PCM Dolby D
- If the current programme does not output sound
in format, only can be selected. Dolby D PCM
Otherwise no sound will be output.
- Select to turn off the audio output from the audio Off
device connected to the output.SPDIF
Note: The options you may choose depend on the
programme you are watching. If you select PCM
and the sound output is prior to the picture,
you can select from the SPDIF Delay Options
menu and press ◄/► to adjust the delay time
to synchronize the sound with the picture.
T-Link
To search for CEC devices connected to the HDMI
sockets in your TV and enable one-touch play and
one-touch standby between CEC devices.
Enable or disable T-Link
1. Press on the remote control, then select Menu
Options > T-Link.
2. .Press ◄/► to select or On Off
Use one-touch play
One-touch play enables you to press the play button
on, for example, your DVD remote control. This starts
playback on your DVD device and automatically
switches your TV to the correct source, displaying DVD
content.
Use system standby
System standby enables you to press the button on,
for example, your TV remote control. This switches
your TV and all connected HDMI devices to standby
mode.
Common interface
Scrambled digital TV channels can be decoded with
a common interface module and a card provided by a
digital TV service operator.
The common interface module may enable several
digital services, depending on the operator and
services you choose (for example, pay TV). Contact
your digital TV service operator for more information
about services and terms.
Use the common interface module
WARNING: Switch off your TV before inserting a
common interface module. Be sure to follow the
instruction described below. Wrong insertion of a
common interface module may damage both the
module and your TV.
1. Following the directions printed on the common
interface module, gently insert the module into the
common interface slot on the TV.
English
EN 7
Use more of your TV
2. Push the module in as far as it will go.
3. Turn on the TV and wait for the common interface
function to be activated. This may take several
minutes.
Note: Do not remove the common interface module
from the slot. Removing the module will
deactivate the digital services.
Access common interface services
After inserting and activating the common interface
module, press on the remote control and select Menu
Options > Common interface.
This menu option is only available if the common
interface module is correctly inserted and activated.
On-screen applications and content are provided by
your digital TV service operator.
Software update
Press on the remote control and select Menu
Options > Software update. Press to enter. OK/►
(Refer to Figure 5.)
- Current version: Checks the current version of the
software.
- Project name Serial number, : Displays the project
name and serial number of your set.
- OAD(over air download): Enables you to install the
latest version of the software if available. Select
OAD OK Setup and press /► to enter the menu.
• Use ◄/► to select under Yes Auto download
to automatically download the latest software if
available. After the software has been downloaded
successfully, you will be prompted to decide if you
want to install it right now. If yes, follow the hints
on the screen to complete your installation. You
can also select to ignore the installation here.
• Select under to decline the No Auto download
automatic download.
• Select and press Manual OAD download OK/►
to start manual scanning the latest software.
Follow the hints on the screen to complete. During
the scan, press to cancel or exit the OK/Exit
process.
Change to Shop or Home mode
1. Press on the remote control and select Menu
Options > Location.
2. ◄/►Press to select your location or .Shop Home
3. Press to exit.Exit
MHEG function
Some digital TV broadcasters offer dedicated digital
text or interactive services (for example, BBC1).
These services work like normal Teletext with the
addition of number, colour and navigation buttons.
1. Press on the remote control and select Menu
Options > Subtitle > Subtitle.
2. ◄/►Press to set to Subtitle Off.
Note: MHEG and subtitles are mutually exclusive
and cannot coexist on the same screen. If
Subtitle On is set to , MHEG will not appear.
3. Press the red button or on the remote control.TEXT
4. Press ▲/▼/◄/► to select or highlight items.
5. Press OK to conrm or activate.
6. Press one of the colour buttons to select an option.
7. TEXTPress or toExit exit.
View photos, play music and watch videos from
a USB storage device
Your TV is tted with a USB connector that enables you
to view photos, listen to music or watch videos stored
on a USB storage device.
Supported le formats:
Photo JPEG
Music MP3
Video AVI, MP4, MPG, MPEG, TS…
Notes: Some USB keys and USB products like
digital cameras or mobile phones are not
fully compatible with USB 2.0 standard so it
may not work with the TV multimedia player.
Not all USB keys or devices are compatible
for the USB function. Not all above formats
are supported. The encoding formats of your
les will determine whether or not they can be
used.
When a USB device is detected, it enters the Media
center menu directly.
Photo
To display photos if available.
1. Select , then press to Media center > Photo OK
enter the main le content browser.
2. In the main le content browser, use ▲/▼/◄/► to
select a photo or an inner le folder.
3. Select an inner le folder, press OK to enter a sub
le content browser.
4. Use ▲/▼/◄/► to select a photo in either main or
sub le content browser, press Menu to display
the photo menu in the folder mode.
- Sort: Sort folders and photos by modication Date
or Name.
- Edit: Copy, paste or delete a selected photo.
- Parser: You can select to display Recursive
photos from all sub le folders.
5. Select a photo, press to watch, andOK a slide
show begins from the selected photo. Press to OK
pause the photo if you want to rotate or zoom the
paused photo. Press to display the photo Menu
menu in the browser mode. You can play, pause or
rotate the photo, select different play mode, zoom

Produkt Specifikationer

Mærke: Thomson
Kategori: TV
Model: 42FS4246

Har du brug for hjælp?

Hvis du har brug for hjælp til Thomson 42FS4246 stil et spørgsmål nedenfor, og andre brugere vil svare dig


TV Thomson Manualer

Thomson

Thomson 32HA2S13W Manual

10 August 2025
Thomson

Thomson 55QG7C14 Manual

1 August 2025
Thomson

Thomson 50QG7C14 Manual

30 Juli 2025
Thomson

Thomson 40QG4S14 Manual

14 Juli 2025
Thomson

Thomson 43UG4S14 Manual

5 Juli 2025
Thomson

Thomson 55QG5C14 Manual

8 Februar 2025
Thomson

Thomson 32QG4S14 Manual

12 December 2024
Thomson

Thomson 43UG5C14 Manual

13 November 2024
Thomson

Thomson 50UG5C14 Manual

13 November 2024
Thomson

Thomson 65UG5C14 Manual

13 November 2024

TV Manualer

Nyeste TV Manualer

Sharp

Sharp 24FD6K Manual

14 August 2025
Pioneer

Pioneer PN65-751-24U Manual

14 August 2025
Hisense

Hisense 65A85H Manual

14 August 2025
Hisense

Hisense 55A7NQ Manual

14 August 2025
Sharp

Sharp 32EA2E Manual

14 August 2025
Sharp

Sharp 24EA4E Manual

14 August 2025
Sharp

Sharp 55FQ8EG Manual

14 August 2025
Sharp

Sharp 55FJ7K Manual

14 August 2025
Pioneer

Pioneer PN55-751-24U Manual

14 August 2025
Sharp

Sharp 55GL4260E Manual

14 August 2025