Thomson ACCESS 520014 Manual

Thomson Ikke kategoriseret ACCESS 520014

Læs gratis den danske manual til Thomson ACCESS 520014 (6 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 27 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 14 anmeldelser. Har du et spørgsmål om Thomson ACCESS 520014, eller vil du spørge andre brugere om produktet?

Side 1/6
N
P
2
1
3
N L O O N S Sin in 1 2 out 1 2
M
Fig. 3
At Home
Fig. 4
WiFi
www.mythomson.com.
Module de commande WiFi
Pour volets roulants et stores
FR
1 - PRÉCAUTIONS D’UTILISATION
Ne laissez pas les enfants manipuler le produit.
Ce produit est prévu pour une utilisation exclusivement
intérieure.
Ce produit est prévu pour être utilisé avec un smartphone
en WiFi.
L’installation électrique doit être conforme aux normes en
vigueur (NFC 15-100) et doit être faite de préférence par un
personnel qualifi é.
Ce produit est prévu pour être monté dans un boitier
d’encastrement d’un interrupteur
Ne pas utiliser ce produit pour piloter un socle de prise
électrique.
2 - ENTRETIEN ET NETTOYAGE
/!\ Coupez l’alimentation électrique avant tout entretien.
Votre produit ne nécessite aucune maintenance particulière.
Utilisez un simple chiffon doux légèrement humidifi é pour
nettoyer votre produit.
N’utilisez pas de substances abrasives ou corrosives.
Ne vaporisez pas directement le produit avec un aérosol.
3 - RECYCLAGE
Ce logo signifi e qu’il ne faut pas jeter les
appareils hors d’usage avec les ordures
ménagères. Les substances dangereuses qu’ils
sont susceptibles de contenir peuvent nuire à la
santé et à l’environnement. Faites reprendre ces
appareils par votre distributeur ou utilisez les
moyens de collecte sélective mis à votre
disposition par votre commune.
4 - DESCRIPTION DU PRODUIT
Voir Fig. 1
Nin Entrée Neutre secteur
Lin Entrée Phase secteur
O1 Sortie Phase montée
O2 Sortie Phase descente
Nout Sortie neutre moteur
S1 Entrée interrupteur fi laire montée
S2 Entrée interrupteur fi laire descente
1Témoin lumineux
2 Bouton d’association
5 - INSTALLATION
5.1 FONCTIONNEMENT
Idéalement placé derrière un interrupteur, ce micromodule
vous permettra de commander à distance vos volets roulants
ou stores. Vous pourrez ainsi piloter vos ouvrants en local en
utilisant votre interrupteur d’origine, ou à distance avec votre
smartphone et l’application At Home.
5.2 CHOIX DE L’EMPLACEMENT ET BRANCHEMENT
Voir Fig. 2
IMPORTANT : Avant de xer défi nitivement votre accessoire,
nous vous conseillons de réaliser un test de portée. Pour cela,
placez votre micromodule au plus proche de sa place défi nitive
avant de le fi xer et réalisez un test de votre accessoire.
Le micro module peut être installé au choix derrière un
interrupteur existant ou derrière un plafonnier.
Après avoir coupé l’alimentation électrique, déconnectez
l’interrupteur mural existant. Connectez le module en suivant le
plan de montage suivant.
Ne pas connecter S1 et S2 au réseau électrique, ils doivent être
reliés à l’interrupteur.
5.3 TELECHARGER L’APPLICATION AT HOME
Voir Fig. 3
5.4 OUVRIR L’APP ET AJOUTER UN NOUVEAU PRODUIT
Voir Fig. 4
6. CARACTERISTIQUES TECHNIQUES
6.1 CARACTERISTIQUES TECHNIQUES
Référence 520014
Puissance maximum : 500W
Fonctionnalités : contrôle de volets roulants et stores
Section de câble jusqu’à 1.5mm2
Usage Intérieur uniquement
T° de fonctionnement 0 °C/+40 °C
Température de stockage -20 °C/+70 °C
Alimentation 230 Vac/50 Hz
Consommation moyenne < 1 W
Installation dans un boitier d’encastrement
Couleur : rouge et gris anthracite
Indice de protection IP20
Poids 65 g
Dimensions : L 43,5mm x W 45mm x H 19,5mm
Garantie 2 ans
6.2 CARACTERISTIQUES RADIO
Protocole radio WiFi 2,4 GHz
Protocole 802.11 b/g/n
Puissance maximale d’émission 100mW
Portée: jusqu’à 80m en champ libre, jusqu’à 30m en intérieur.
7. GARANTIE
Ce produit est garanti 2 ans, pièces et main d’œuvre, à
compter de la date d’achat. Il est impératif de garder une
preuve d’achat durant tout cette période de garantie.
La garantie ne couvre pas les dommages causés par chocs
et accidents. Aucun des éléments de ce produit ne doit être
ouvert ou réparé par des personnes étrangères à la société
Smart Home France. Toute intervention sur l’appareil annulera
la garantie.
8. ASSISTANCE ET CONSEIL
Malg tout le soin que nous avons porté à la conception
de nos produits et à la réalisation de cette notice, si vous
rencontrez des dif cultés lors de l’installation de votre produit
ou des questions, il est fortement conseillé de contacter nos
spécialistes qui sont à votre disposition pour vous conseiller.
ACCESS
ref. 520014
V2
WiFi
Made in
France
www.mythomson.com.
Fig. 1
1 2
N L O O N S Sin in 1 2 out 1 2
Fig. 2
N L O O N S Sin in 1 2 out 1 2
En cas de problème de fonctionnement pendant l’installation
ou après quelques jours d’utilisation, il est impératif de nous
contacter devant votre installation a n que l’un de nos
techniciens diagnostique l’origine du problème car celui-ci peut
provenir d’un réglage non adapté ou d’une installation non
conforme.
Contactez les techniciens de notre service après-vente au :
0,35 €
/ min
0 892 701 369
Du lundi au vendredi de 9H à 12H et de 14H à 18H.
9. DÉCLARATION DE CONFORMITÉ
Smart Home France déclare que l’équipement est en conformité
avec les exigences essentielles applicables de la Directive RED
2014/53/EU.
Directive 2014/35/EU: (protection de la santé et sécurité des
utilisateurs.)
Directive 2014/30/EU: (exigences de protection en ce qui
concerne la compatibilité électromagnétique).
Directive 2014/53/EU : (utilisation effi cace du spectre
radioélectrique, de fon à éviter les interférences
dommageables).
La déclaration de conformité complète est disponible sur le site
www.mythomson.com
A Tours le 21/05/2019
Alexandre Chaverot, président
Retrouvez l’intégralité de notre gamme Thomson sur
Pour en savoir plus :
www.quefairedemesdechets.fr
est une marque de TECHNICOLOR S.A. ou
de ses affi liées utilisée sous licence par :
SmartHome France
19 avenue Marcel Dassault
ZAC des Deux Lions - 37200 Tours - France
WiFi control module
for roller shutters and blinds
EN
1 - OPERATING PRECAUTIONS
Do not allow children to operate the product.
This product is designed exclusively for indoor use.
This product is designed to work with a smartphone with WiFi.
The electrical installation must meet current standards (NFC
15-100) and should preferably be done by a qualifi ed person.
This product is designed to be placed in the recess-mount housing
of a switch
Do not use this product to control an electrical socket.
2 - MAINTENANCE AND CLEANING
/!\ Disconnect from the mains before carrying out any work
on the device.
Your product does not require any specifi c maintenance.
Use a soft, slightly damp cloth to clean your product.
Do not use abrasive or corrosive substances.
Do not spray any products directly onto the unit.
3 - RECYCLING
This logo indicates that devices which are no
longer in use must not be disposed of as
household waste. They are likely to contain
hazardous substances that are dangerous to
both health and the environment. Return the
equipment to your local distributor or use the
recycling collection service provided by your local
council.
4 - PRODUCT DESCRIPTION
See Fig. 1
Nin Mains Neutral Input
Lin Mains Phase Input
O1 Raising Phase Output
O2 Lowering Phase Output
Nout Mains Motor Output
S1 Raising Wired Switch Input
S2 Lowering Wired Switch Input
1LED indicator
2 Pairing button
5 - INSTALLATION
5.1 OPERATION
Ideally placed behind a switch, this micro module allows you
to remotely operate your roller blinds and shutters. This means
that you can operate your window coverings locally using the
original switch or remotely using your smartphone and the At
Home app.
5.2 CHOICE OF LOCATION AND CONNECTION
See Fig. 2
IMPORTANT: Before permanently attaching your accessory, we
advise you to check the range. To do so, place your micro
module as close as possible to its nal location before you
attach it and test your accessory.
The micro module can be installed either behind an existing
switch or behind a ceiling fi xture.
After the electrical supply has been disconnected, disconnect
the existing wall switch. Connect the module according to the
assembly plan.
Do not connect S1 and S2 to the mains, they must be connected
to the switch.
5.3 DOWNLOAD THE AT HOME APP
See Fig. 3
5.4 OPEN THE APP AND ADD A NEW PRODUCT
See Fig. 4
6. TECHNICAL CHARACTERISTICS
6.1 TECHNICAL CHARACTERISTICS
Reference 520014
Maximum power: 500W
Functionalities: control for roller blinds and shutters
Cable section up to 1.5mm2
For indoor use only
Operating temperature 0°C/+40°C
Storage temperature -20°C/+70°C
Power supply 230VAC/50Hz
Average consumption < 1W
Installation in a fl ush-mounting box
Colour: red and charcoal grey
IP20 protection rating
Weight 65g
Dimensions: L 43.5mm x H 45mm x D 19.5mm
• 2-year warranty
6.2 RADIO TECHNICAL CHARACTERISTICS
WiFi 2.4GHz radio protocol
802.11 b/g/n protocol
Maximum transmitting power 100mW
Radio range: up to 80m open air range, up to 30m indoors.
7. WARRANTY
This product is guaranteed for parts and labour for 2 years
from the date of purchase. It is essential to retain the proof of
purchase for the duration of the warranty period.
The warranty does not cover damage caused by knocks or
accidents. None of the parts of this product may be opened or
repaired by any persons not employed by SmartHome France.
The warranty will be void if the device is tampered with.
8. ASSISTANCE AND ADVICE
If, in spite of the care we have taken in designing our products
and drafting these instructions, you do encounter dif culties
when installing your product or you have any questions, we
urge you to contact one of our specialists who will be glad
to help.
If you encounter operating problems during the installation or a
few days afterwards, it is essential that you are in front of your
installation when contacting us, so that one of our technicians
can diagnose the source of the problem, as it will probably be
the result of a setting that is incorrect or an installation that is
not to specifi cation.
Contact our after sales service team technicians:
0,35 €
/ min
0 892 701 369
Monday to Friday, 9AM to 12PM and 2PM to 6PM CET.
9. DECLARATION OF COMPLIANCE
SmartHome France declares that the equipment complies with
the essential requirements applicable to the RED Directive
2014/53/EU.
Directive 2014/35/EU: (protection of usershealth and safety)
Directive 2014/30/EU: (protection requirements relating to
electromagnetic compatibility).
Directive 2014/53/EU: (effi cient use of the radio spectrum, in
order to avoid harmful interference).
The full declaration of compliance is available on the website
www.mythomson.com.
Tours, 21/05/2019
Alexandre Chaverot, CEO
View the full Thomson range on
Pour en savoir plus :
www.quefairedemesdechets.fr
is a brand of TECHNICOLOR S.A. or its
partners operating under licence through:
SmartHome France
19 avenue Marcel Dassault
ZAC des Deux Lions - 37200 Tours - France


Produkt Specifikationer

Mærke: Thomson
Kategori: Ikke kategoriseret
Model: ACCESS 520014

Har du brug for hjælp?

Hvis du har brug for hjælp til Thomson ACCESS 520014 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Thomson Manualer

Thomson

Thomson CT610 Manual

15 Oktober 2024
Thomson

Thomson M22FC13201 Manual

20 September 2024
Thomson

Thomson TCM470 Manual

19 September 2024
Thomson

Thomson CALI-ON 520001 Manual

15 September 2024
Thomson

Thomson 150510 Manual

9 September 2024
Thomson

Thomson DCM475 Manual

3 September 2024
Thomson

Thomson THFP248GMC Manual

31 August 2024
Thomson

Thomson 512506 Manual

28 August 2024
Thomson

Thomson 512505 Manual

28 August 2024
Thomson

Thomson 512508 Manual

28 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer