Safety Notice
Approved for residential type untis for residential use only read these insructions and be safe.
Please read these instructions completely before starting.
The installation of the appliance must respect all codes.
Important: Save these instructions so that you can provide the electrical inspector in your area.
Safety Warning: Turn off the circuit in the electrical panel and lock front panel to connect the cord of this unit.
Power requirement: 110V-120V/60HZ
CAUTION: USE THIS PRODUCT FOR GENERAL FAN ONLY. DO NOT USE THIS PRODUCT TO EXHAUST FUMES OR
HAZARDOUS OR EXPLOSIVE MATERIALS.
WARNING TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK OR INJURY TO PEOPLE, OBSERVE THE
FOLLOWING:
1. Use this unit only for the purposes intended by the manufacturer. If you have any questions about this product, contact the
manufacturer.
2. Before the machine’s maintenance or cleaning, turn off the electrical panel and lock the panel blocking feature to prevent
from accidentally activating the power. If it is not possible to lock the access panel, attach a highly visible label to the
electrical panel.
3. A qualified person should perform the installation and wiring of the electricity in accordance with all codes and all
standards, including fire resistance rating.
4. When you use hood together with stove, please do not close the window and door of the kitchen. Because during the fuel
stove working, which will consume lots of air, so do open the door and window to make the kitchen ventilating, to avoid
any suffocation.
5. It is important to provide sufficient air for proper combusion of heating equipment and proper evacuation of gases through
the chimney pipe to prevent back flow of air. Follow the instructions and safety standards of the manufacturers of heating
equipment, such as those published by the National Fire Protection Association (NFPA), the American Society for Heating
Refrigeration and Air Conditioning Engineers (ASJRAE) and the code authorities in your area.
6. When cutting or drilling into wall or ceiling, be sure not to damage electrical wiring or other access to public service.
7. Always evacuate outside the conduit system.
To reduce the risk of fire and to properly exhaust air, be sure that the pipe is leading outside, do not exhaust air into the
