Tissot T033.210.16.111.00 Manual

Tissot Ur T033.210.16.111.00

Læs gratis den danske manual til Tissot T033.210.16.111.00 (3 sider) i kategorien Ur. Denne vejledning er vurderet som hjælpsom af 9 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 5 anmeldelser. Har du et spørgsmål om Tissot T033.210.16.111.00, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

www.tissot.ch 156_EN / 02.14

1/3

Analogue Quartz

Watches

User’s Manual

Display and functions

Seconds hand

Minute hand

Hour hand

Date*

Day*

* According to model

Models with a screwed crown :

IA Initial position (screwed down, not pulled out)

IB Winding position (unscrewed, not pulled out)

Analogue Quartz Waches

www.tisso t .ch 156_EN / 02. 14

2/3

Congratulations

We congratulate you on choosing a TISSOT® watch, a Swiss brand among

the most highly renowned in the world. Meticulously designed, using only

the highest quality materials and components, your watch is protected

against shocks and impacts, variations in temperature, water and dust.

To ensure that your watch operates with perfect precision for many

years to come, we advise you to pay very careful attention to the advice

provided hereafter.

This user’s manual applies to all TISSOT® quartz, quartz solar

or autoquartz watches. Please refer to the explanations relating

specifically to your watch model.

Recharging the accumulator

Models with screwed crown

To ensure even better water resistance, certain models are fitted with

a screwed crown. Before setting the time, date* or day*, you must first

unscrew the crown into position before you can pull it out to position IB II

or .III

Important: After every operation, the crown must be screwed back

in to maintain the water-resistance of the watch.

Quartz watches

Quartz watches are battery powered, and cannot be recharged.

Autoquartz watches

To wind an Autoquartz watch, turn the crown through a few dozen

(~50) revolutions in position (or for models with screwed crown). I IB

The automatic winding system will then ensure that the watch is fully

wound by means of your wrist movements alone. The watch needs to be

worn for several weeks to reach maximum charge, and thereby achieve

its theoretical power reserve of 100 days.

Quartz solar watches

These watches do not have a winding crown. To recharge the accumulator,

expose the dial of your watch either to the sun or to artificial light.

Settings

NB: Please take account of the information above if your watch is

fitted with a screwed crown.

Setting the time

Pull the crown out to position and turn it in either direction until the III

desired time is displayed.

On certain models with a seconds hand, you can synchronize it with an

official time signal (radio/TV/Internet). When the crown is pulled out to

position III, the seconds hand is stopped. Once the time is synchronised,

push the crown back into position (and screw it back in on models with I

a screwed crown).

Rapid correction of the date* and day*

NB: Do not perform a rapid date correction between 22:00

and 02:00.

Pull the crown out to position and turn it clockwise until the desired date II

is displayed, or counterclockwise to correct the day. During this operation,

your watch will keep operating, so you will not need to adjust the time.

Technical information

TISSOT

quartz watches

Boasting the incomparable accuracy of quartz, they generally have

a power reserve of more than 2 years in continuous use, though

this varies slightly depending on the habits of the wearer and the

ambient temperature. Similarly, the ambient temperature may affect

the accuracy of quartz movements, causing variations of around -0.5 to

+0.7 seconds per day. All you have to do is to set the time, and possibly

the date if your watch is equipped with a display of this kind (see the

“Settings” section).

EOL Function – (End of Life)

The battery end of life is indicated by the seconds hand making 4-second

jumps. The watch will keep operating for a few more days, but the battery

should be removed and replaced by an approved TISSOT® service centre

as soon as possible.

TISSOT

Autoquartz watches

As accurate as a quartz watch yet operating without a battery, these

watches are equipped with an accumulator which automatically recharges

its energy by means your wrist movements. The oscillation movements of

your wrist turn an oscillating weight, each rotation of which activates

a micro-generator which in turn charges an accumulator with electrical

energy.

Power supply

The lithium accumulator has an average service life of more than

10 years. Never replace it with a conventional silver oxide battery, since

this would irrevocably destroy the movement.

EOE Function – (End of Energy)

Your TISSOT® Autoquartz watch is equipped with an EOE (End of Energy)

energy requirement indicator. If you observe the seconds hand jump

every 4 seconds, it means that your watch needs to be wound (see the

“Recharging the accumulator” section).

Water-resistance

TISSOT® watches are designed to withstand a pressure of up to 3 bar

(30 m / 100 ft), 5 bar (50 m / 165 ft), 10 bar (100 m / 330 ft), 20 bar

(200 m / 660 ft) or 30 bar (300 m / 1000 ft), depending on the information

shown on the case-back.

A watch cannot be permanently guaranteed absolutely water-resistant.

It may be affected by ageing of the gaskets or by an accidental impact

on the watch. We recommend that you have your watch’s water

resistance checked once a year by an approved TISSOT® service centre.

Care and maintenance

Temperature

Do not expose your watch to sudden temperature changes (exposure to

sunlight followed by immersion in cold water) or extreme temperatures

(over 60°C (140°F) or below 0°C (32°F)).

Magnetic fields

Do not expose your watch to intense magnetic fields such as those

generated by loudspeakers, mobile phones, computers, refrigerators or

other electromagnetic appliances.

Shocks and impacts

Avoid thermal shocks or impacts, since they may harm your watch.

In the event of a violent impact please have your watch checked by an

approved TISSOT® service centre.

Produkt Specifikationer

Mærke:	Tissot
Kategori:	Ur
Model:	T033.210.16.111.00
Vægt:	27 g
Armbånd, materiale:	Læder
Vandfast:	Ja
Urkassens materiale:	Rustfrit stål
Kalender:	Ja
Urtype:	Armbåndsur
Urets glastype:	Safir
Produktdesign:	Casual
Se opkaldstype:	Analogopkald
Vandbestandigt tryk:	3 ATM
Vandbestandig dybde:	30 m
Husets farve:	Sølv
Båndets hovedfarve:	Hvid
Etui form:	Rund
Hovedfarve på urskive:	Hvid
Køn:	Hunstik
Størrelse på urkasse:	28 mm
Kalendertype:	Dato
Se markørstil:	Ingen nummer-visning
Kronograf:	Ingen
Antal visere:	3
Bevægelses model:	803.112
Urkassens tykkelse:	7.4 mm